Choosing a replacement TIG torch is mostly a compatibility decision. A good torch is useless if the power connector, gas fitting, or welding process does not match your machine. Quick Answer: the YESWELDER WP-17V-35 is a practical 13-foot, air-cooled Lift TIG torch for compatible welders, but you should not buy it until you confirm the 35-50 quick connector, 5/8-18 RH gas fitting, and valve-controlled Lift TIG setup. This review explains its verified specifications, included consumables, real operating limits, and the buyers who should skip it.
Quick Verdict
Rating: 8/10, recommended with compatibility caveats
Best For: Owners of compatible YESWELDER multiprocess or stick welders who need a simple valve-controlled Lift TIG torch
Bottom Line: The 13-foot lead, 150-amp DC rating, included 10N-series consumables, and insulated cable make this a useful starter or replacement torch. Its main drawback is limited fitment, because a similar-looking Dinse connection does not guarantee the correct connector size, gas fitting, polarity, or process support.
Key Takeaways
- Verified model: The Amazon listing identifies the part as the YESWELDER WP-17V-35, ASIN B07YP9TQV1.
- Core setup: It is a 13-foot, air-cooled, valve-controlled Lift TIG torch with a 35-50 quick connector and 5/8-18 RH gas fitting.
- Operating limit: YESWELDER lists a 35% duty cycle at 150 amps DC and 120 amps AC for the current WP-17V-35.
- Compatibility warning: Amazon and YESWELDER currently publish different model lists, so you should verify your exact welder revision and connector before ordering.
- Not a complete setup: You still need a compatible power source, 100% argon where required, a regulator and hose, tungsten, filler metal when needed, and welding PPE.
YESWELDER WP-17V-35 at a Glance
| Specification | Detail |
|---|---|
| Brand | YESWELDER |
| Model / Part Number | WP-17V-35 |
| ASIN | B07YP9TQV1 |
| Product Type | Valve-controlled Lift TIG torch |
| Cooling | Air-cooled |
| Lead Length | 13 feet |
| Manufacturer Duty Cycle | 35% at 150 amps DC; 35% at 120 amps AC |
| Power Connection | 35-50 quick plug, non-standard according to YESWELDER |
| Gas Connection | 5/8-18 RH |
| Current Conductor | 8mm² copper wire |
| Listed Materials | Copper, leather, and plastic |
| Item Weight | 3.47 pounds |
| Package Dimensions | 13.19 x 12.83 x 2.68 inches |
| Included Cups | 10N50 #4, 10N49 #5, and 10N48 #6 alumina ceramic cups |
| Included Collets | 10N25 1/8 inch, 10N23 1/16 inch, and 10N24 3/32 inch |
| Other Included Parts | 10N28 1/8-inch collet body, 57Y02 long back cap, and 57Y04 short back cap |
| Best Use | Light to moderate Lift TIG work on a verified compatible machine |
What Is the YESWELDER WP-17V-35?
The YESWELDER WP-17V-35 is an air-cooled torch for welders that use Lift TIG and a manual gas valve. Its 35-50 quick plug carries welding current, while the 5/8-18 RH fitting connects the shielding-gas supply. The simple design avoids a water cooler and electronic torch trigger, but you must manage gas flow and heat.
The package includes three cup sizes, three collet sizes, a collet body, and long and short back caps. You still need the correct tungsten, argon system, and filler rod when required.
Who Should Buy It?
Best For
- Owners of a welder that specifically supports valve-controlled Lift TIG and a 35-50 connector
- Hobbyists and repair users who want a 13-foot lead for bench, cart, and small fabrication work
- Buyers who need a basic replacement or spare WP-17V-style torch with starter consumables
Skip If
- Your machine uses a 10-25 connector, a proprietary combined connector, or an electronic torch-control plug
- You need a water-cooled torch for sustained high-amperage work
- You expect a complete TIG kit with regulator, gas hose, tungsten, filler metal, and foot pedal
Before You Buy: Do not rely on the model name or connector appearance alone. The Amazon listing and YESWELDER’s current WP-17V-35 page publish different compatibility lists, so compare your welder manual, connector size, gas fitting, polarity instructions, and Lift TIG controls before ordering.
Compatibility and Connector Fit
The Amazon listing for ASIN B07YP9TQV1 names the YESWELDER MIG-165DS PRO, MIG-185DS PRO, MIG-205DS PRO, MIG-250PRO, and ARC-205DS PRO. YESWELDER’s current WP-17V-35 product page names the MIG-205DS, MIG-250PRO-SG, YWM-200, YWM-211P, DP200, and MP200 series instead. Product revisions can change connector size and included controls, so neither list should replace a direct check of your exact machine.
A 35-50 Dinse-style plug is only one part of fitment. Your machine must also support Lift TIG, provide the correct current path and polarity, and work with a manual gas valve. If your welder uses a 10-25 socket, a five-pin control cable, or gas routed through the machine, this torch may require a different configuration or may not be suitable at all.
Pro Tip: Photograph your welder’s output socket and gas connection, then compare them with the listing images and manual before you buy. This is more reliable than searching by welder name because manufacturers sometimes update connectors without changing the main model family.
Feature-by-Feature Review
Air-Cooled 150-Amp Design
YESWELDER lists a 35% duty cycle at 150 amps DC and 120 amps AC. The torch needs cooling time near its rated load, making it better for short welds, tack work, repairs, and moderate fabrication than continuous maximum-output use.
Air cooling avoids a pump, reservoir, and water lines. The tradeoff is more handle and cable heat during longer welds. Stop and let the torch cool if it becomes uncomfortably hot.
Valve-Controlled Lift TIG Operation
The WP-17V uses a manual valve to control shielding gas. On a compatible setup, you open it before initiating the arc and close it after the required post-weld gas coverage. It does not provide the automatic gas timing found on many dedicated TIG machines.
Lift TIG reduces the dragging used with basic scratch-start TIG, but starting behavior still depends on the welder’s circuit and settings.
13-Foot Lead and Insulated Jacket
The 13-foot lead suits most home shops, carts, and workbenches without the bulk of a 25-foot assembly. Amazon lists copper, leather, and plastic, plus an insulated jacket intended to resist sparks, spatter, oil, wear, and UV exposure.
The jacket is not damage-proof. Keep the lead away from sharp edges, hot workpieces, tires, and grinding sparks, then store it in a loose coil.
8mm² Copper Conductor
The listing specifies an 8mm² copper conductor. That conductor carries welding current through the torch assembly and helps manage heat within the product’s rated operating range. It does not increase your welder’s output or allow you to ignore the 35% duty-cycle limit.
Included Cups, Collets, and Back Caps
The #4, #5, and #6 cups provide different gas-coverage and access options. The 1/16-inch, 3/32-inch, and 1/8-inch collets secure matching tungsten diameters, while the long and short back caps change clearance and electrode length.
Only one 1/8-inch collet body is listed, so other configurations may require more parts. Match the cup, collet, and body before tightening the back cap.
How It Performs in Real Use
For Bench and Cart Work
The 13-foot lead is long enough to move around a small fabrication table or reach a workpiece beside a welding cart. It offers more freedom than a short torch without creating as much cable drag as a 25-foot setup. The manual gas valve also keeps the torch independent of a machine-mounted gas solenoid when your welder is designed for that arrangement.
For Light Steel and Stainless Repairs
On a compatible DC Lift TIG welder, this torch is best suited to short repair welds, brackets, small tubing, and light fabrication in materials supported by the power source. The included cup and collet sizes give you several starting configurations, but arc quality still depends on clean material, proper tungsten preparation, shielding-gas flow, polarity, and machine settings.
For Longer or High-Amp Welds
The main limit appears during sustained work. Long beads and repeated high-amperage passes build heat quickly, so a larger air-cooled torch or water-cooled system is better for production use.
For Aluminum Projects
Do not assume this torch enables aluminum TIG welding. Conventional TIG welding of aluminum usually requires an AC-capable TIG power source with suitable controls. Some YESWELDER multiprocess machines can weld aluminum by MIG with a spool gun while their Lift TIG function remains intended for other materials. Check the welder manual for the exact process before purchasing this torch for aluminum work.
Setup Tips Before First Use
- Confirm every connection: Verify the 35-50 power plug, 5/8-18 RH gas fitting, and any required adapters against the welder manual.
- Follow the machine’s polarity instructions: Do not guess. Connect the torch and work lead exactly as the manufacturer specifies for Lift TIG.
- Match the tungsten to the collet: Use the 1/16-inch, 3/32-inch, or 1/8-inch collet that matches your electrode diameter.
- Check gas requirements: Compatible YESWELDER Lift TIG setups commonly call for 100% argon. Use the gas type and flow guidance stated in your welder manual.
- Open and close the valve deliberately: Establish shielding gas before the arc, maintain coverage as required after the weld, then close the valve so you do not waste argon.
- Inspect for leaks and damage: Check the gas fitting, hose, cable jacket, ceramic cup, collet, and back cap before each session.
Safety and Operating Limits
Wear a properly rated welding helmet, safety glasses, dry welding gloves, flame-resistant clothing, and closed footwear. Secure the shielding-gas cylinder upright, use a regulator intended for the gas, and keep the work area ventilated. Argon can displace oxygen in enclosed spaces even though it is not flammable.
Keep the torch lead dry and away from damaged insulation, sharp edges, hot metal, and moving equipment. Stop using the torch if you find exposed conductor, a loose power plug, a cracked gas hose, or damaged threads. The current YESWELDER product page also carries a California Proposition 65 warning, so review the manufacturer’s safety information and your machine manual before use.
Durability and Maintenance
Torch life depends heavily on handling. Do not pull the welder by the lead or rest the cable on hot steel. Wipe dirt and oil from the jacket, and keep metal dust out of the torch head.
Replace cracked cups, distorted collets, burned collet bodies, damaged O-rings, and worn back caps as needed. A loose or contaminated tungsten can cause unstable starts and poor gas coverage. Store the torch in a loose coil with the valve protected from impact.
Pros and Cons
Pros
- 13-foot lead offers useful reach for home-shop and cart-based work
- Air-cooled design avoids the cost and complexity of a water cooler
- 35-50 quick connector and 5/8-18 RH gas fitting are clearly specified
- Includes three cup sizes, three collet sizes, a collet body, and two back caps
- Manual valve works with compatible Lift TIG machines that lack torch gas control
Cons
- Compatibility lists differ between the Amazon listing and current manufacturer page
- 35% duty cycle limits sustained high-amperage welding
- Package does not include the full gas system, tungsten, filler metal, or foot control
Is It Worth the Price?
The WP-17V-35 is best viewed as a value-focused accessory rather than a premium universal torch package. It offers strong value when it connects directly to your current welder, because the 13-foot assembly and included consumables can get a basic Lift TIG setup closer to working without several separate purchases.
The value falls quickly if you need adapters, different gas hardware, a torch-control cable, or a higher-duty-cycle solution. It is worth considering when you have confirmed compatibility and plan light to moderate work. It is not the best fit for production welding or buyers who want automatic gas control and foot-pedal amperage adjustment.
How It Compares to Alternatives
The YESWELDER WP-17V-10 is the closest same-brand alternative when your machine uses a smaller 10-25 power connection. It is still a valve-controlled, air-cooled Lift TIG torch, but the connector size and compatible welder list differ, so it is not an interchangeable choice.
The CK Worldwide CK17V and Weldcraft A-150/WP-17V families offer broader cable, connector, handle, and replacement-part choices. They still require the correct machine-side connection. The YESWELDER makes the most sense when verified direct fit matters most.
Frequently Asked Questions
Will the YESWELDER WP-17V-35 fit my welder?
It fits only when your welder supports valve-controlled Lift TIG and has the correct 35-50 power connection and gas arrangement. Check the manual and physical connectors because Amazon and YESWELDER currently list different compatible model groups.
Is this a complete TIG welding kit?
No. The package contains the torch and listed front-end accessories, but you still need a compatible welder, shielding-gas cylinder, regulator, hose, tungsten, filler metal when required, and welding safety gear.
What tungsten sizes fit the included collets?
The listing includes collets for 1/16-inch, 3/32-inch, and 1/8-inch tungsten. Match the tungsten, collet, and collet body correctly, and follow the power source’s recommended electrode type and amperage range.
Can this torch weld aluminum?
The torch alone does not determine aluminum capability. Conventional aluminum TIG normally requires an AC-capable TIG machine, while many multiprocess welders provide aluminum capability through MIG and a spool gun instead. Check your machine’s TIG process specifications before buying.
Does it support a foot pedal or torch trigger?
This is a valve-controlled Lift TIG torch and the listing does not show an electronic trigger or pedal-control connection. Foot-pedal support depends on the welder, and many YESWELDER MIG machines do not provide the required control socket.
How long can I weld at 150 amps?
YESWELDER lists a 35% duty cycle at 150 amps DC. Duty cycle is measured over a set test period, so the torch needs cooling time near maximum load. Also follow the welder’s duty cycle, which may be lower than the torch rating.
What warranty does the WP-17V-35 include?
The accessible Amazon page does not state a specific warranty term for this torch, and the current product page links to YESWELDER’s general warranty policy without showing a torch-specific duration. Review the written warranty from the seller before purchase and save a copy with your receipt.
The Bottom Line
The YESWELDER WP-17V-35 is a sensible 8/10 choice for buyers who have confirmed a compatible 35-50, valve-controlled Lift TIG setup and want a 13-foot air-cooled torch with useful starter consumables. Its strongest points are reach, simple gas control, and a clear 150-amp DC rating, while its biggest limitation is fitment uncertainty across welder revisions. Skip it if you need a 10-25 connector, automatic torch controls, a foot pedal, or sustained high-amperage cooling.
Ready to Buy?
Check the latest price, seller, compatibility notes, and included parts before you decide.
