🔧 Practical welding guides, tested in a real garage
Welding Machine Reviews

BILT HARD 135A Welder Accessories: What Is in the Kit

BILT HARD 135A accessories kit - product photo

The BILT HARD 135A accessories on this listing come with a 110V inverter welder that combines flux core MIG, Lift TIG and Stick. This page focuses on what comes in the box and what is missing. The listing shows a solar-powered helmet, MIG gun, ground clamp and flux core wire, but no TIG torch, so Lift TIG needs a separate purchase. For the full performance and safety breakdown, read the main BILT HARD 135A welder review.

Check price on Amazon

Specification Per the listing
Processes Flux core MIG, Lift TIG and Stick, per the listing
Input 110V household power
Dimensions 13.6 x 6.6 x 11.15 inches, per the listing
Controls LED digital display and synergic control, per the listing
Safety Auto shutdown, error codes and cooling fan, per the listing
Weight Check the listing: weight figures for this welder vary between listings
TIG torch Not included

BILT HARD 135A Accessories: What Is in the Kit

The listing describes a ready-to-start flux core MIG kit. Compare this list with the current listing before ordering, because bundles change.

  • Solar-powered auto-darkening helmet: a starter helmet. Check its shade range and sensor behavior before you weld.
  • 6.6 ft MIG gun: with a pre-installed 0.030 inch contact tip.
  • 10 ft ground clamp: attach it to clean, bare metal close to the weld.
  • 2 lb flux core wire spool: enough for setup, test beads and small repairs.
  • Spare 0.035 inch contact tip: for a second wire size.
  • Gloves, brush and chipping hammer: basic protection and slag cleanup.

What Is Not Included

The listing states that a TIG torch is not included, so Lift TIG needs a compatible torch plus a regulator, shielding gas and tungsten. Stick welding needs an electrode holder and electrodes, so confirm what your package contains before you plan Stick work. Budget for extra flux core wire, spare contact tips and better gloves if you plan to weld often.

Who This Kit Suits

A bundled kit suits beginners and home users who want to start flux core MIG practice without sourcing a helmet, gun and wire separately. It is a light-duty 110V setup, so it is not meant for thick plate or daily production work. Practice on scrap that matches your project before you weld a real repair, and follow the manual for power, polarity and wire settings.

Pros and Limitations

Pros

  • Starter kit includes helmet, gun, clamp, wire and cleanup tools
  • Three processes in one 110V machine, per the listing
  • Synergic control and LED display for easier setup

Limitations

  • TIG torch is not included
  • Weight figures are inconsistent between listings
  • Warranty depends on the seller, so check before ordering
  • Light-duty 110V output limits thick material

Related reading: compare it with the YESWELDER 135Amp MIG welder, the BESTMIG 135A MIG welder, or the TOOLIOM 135A gasless flux core welder.

Frequently Asked Questions

Is a TIG torch included with the BILT HARD 135A?

No. The listing says the TIG torch is not included. You need a compatible torch, regulator, shielding gas and tungsten for Lift TIG.

What accessories come with it?

The listing shows a solar-powered helmet, 6.6 ft MIG gun with a 0.030 inch tip, 10 ft ground clamp, 2 lb flux core wire, a spare 0.035 inch tip, gloves, a brush and a chipping hammer.

Can it weld aluminum?

The listing does not present it as an aluminum welder. Flux core MIG and Stick are used on steel, and aluminum needs a different setup.

Does it need shielding gas?

Not for self-shielded flux core wire. Lift TIG does need a shielding gas setup.

What warranty applies?

Do not assume the manufacturer warranty covers every marketplace purchase. Check the listing, the seller and the paperwork in the box.

The Bottom Line

This BILT HARD 135A listing is a bundled 110V starter kit for flux core MIG practice, with Lift TIG possible once you add a torch and gas equipment. Check the kit contents, weight and warranty on the listing before you buy.

Check price on Amazon

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *