As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The BRAVECOW welding machine cover is a waterproof vinyl dust cover listed for Diversion 165 and 180 TIG welders (the listing cites model number 300579), measuring 62 x 27 x 45 cm, with a front pocket and a foldable design. It keeps dust, splashes and sun off a parked TIG machine.
It is aimed at owners of those specific TIG welders, which are Miller models. Miller’s own cover for those machines uses part number 300579, so the listing appears to be a third-party equivalent. Skip it if you have a different machine and have not checked the dimensions. Details are from the Amazon listing, not testing.
At a Glance
| Item | Detail (per the Amazon listing) |
|---|---|
| Product | BRAVECOW welding machine cover |
| Listed fit | Diversion 165 and 180 TIG welders (reference 300579) |
| Listed size | 62 x 27 x 45 cm (about 24.4 x 10.6 x 17.7 in) |
| Material | Waterproof vinyl |
| Features | Foldable, large front pocket, dust and UV protection |
| Weight | Not stated in the listing |
Why fit matters on a BRAVECOW welding machine cover
A TIG inverter has vents, a front panel with a knob and connectors, and often a carrying handle. A generic cover over that shape can sag, blow off or press on the controls. A cover made to the machine’s footprint fits snugly and leaves the handle and vents where you expect them.
It is worth noting that the number 300579 is the Miller part number for the protective cover for Diversion 165 and 180. A third-party cover that quotes this number is claiming to match the shape, which is helpful but not a guarantee of exact fit. Check the dimensions yourself.
How to Check It Fits Your Machine
- Confirm your model. The listing names Diversion 165 and 180 only. Check the model on the data plate of your welder.
- Compare the dimensions. The cover is listed at 62 x 27 x 45 cm. Measure your machine including handle, knobs and any foot pedal or torch hanger.
- Check the cable arrangement. You will probably leave the torch and ground cables outside the cover or coiled on top. Plan where they go.
- Look at the pocket. The front pocket is useful for small items like a foot-pedal plug or tungsten, but do not store hot or sharp items in it.
Pros and Limitations
Pros
- Machine-specific sizing in the listing.
- Waterproof vinyl keeps dust and splashes off.
- Front pocket for small accessories.
- Foldable to store when you are using the machine.
Limitations
- Fit is limited to the machine models in the listing.
- Vinyl is not heat resistant. Do not cover a hot machine.
- Vinyl traps humidity if the machine is damp.
- No weight or warranty details are given in the listing.
Care and Use
- Switch off, unplug and let the machine cool before covering it.
- Close the gas valve and coil the leads so you do not trip over them.
- Wipe the cover with a damp cloth. Do not machine wash.
- Store the machine in a dry place. A cover is a dust shield, not a substitute for a dry room.
- Remove the cover before running the machine so the fan can breathe.
For carts and bigger setups, see the 420D welding cart cover and the Lincoln Electric welder generator cover.
Alternatives and Related Guides
- Iptienda welding cart cover – a 500D cart cover
- 420D welding cart cover – a taller cart cover
- Lincoln Electric welder generator cover – a cover for a welder generator
- AosBet welding cart – a cart to park your TIG welder on
Frequently Asked Questions
Which welders does the BRAVECOW cover fit?
The listing names Diversion 165 and 180 TIG welders and quotes 300579. Check your machine model and compare its measurements with the 62 x 27 x 45 cm size before ordering.
Is the cover waterproof?
It is made of waterproof vinyl per the listing, which should shed dust and splashes. It is a storage cover, not a seal, so keep the welder in a dry place and do not cover a wet machine.
Can I run the welder with the cover on?
No. Remove the cover before use so the cooling fan can draw air and the machine does not overheat. Cover it only when the machine is off, unplugged and cool.
Does the cover have a warranty or weight listed?
Neither detail is given in the listing text, so check the product page before ordering. Treat it as a basic dust cover and inspect it periodically for cracks or tears.
Bottom Line
The BRAVECOW cover is a sensible dust and splash cover for Diversion 165 and 180 TIG welders. Confirm your model and measurements, cover the welder only when it is cool and off, and keep it in a dry spot.
