This 420D welding cart cover is an Oxford cloth cover listed at 37 x 18 x 47 inches, with an adjustable drawstring, vents, two handles and a storage bag. The listing says it is meant for carts that carry cylinders in the 20 to 80 cu ft range. This 420D waterproof welding cart cover protects a cart and machine from dust and moisture.
It is aimed at people who keep a welding cart, machine and bottle together in a shed, carport or garage and want a taller cover than the usual 40 inch size. Skip it if your cart is short, because a loose cover collects wind and water. The information here is from the Amazon listing, not tested by us.
420D Welding Cart Cover at a Glance
| Item | Detail (per the Amazon listing) |
|---|---|
| Product | 420D waterproof welding cart cover |
| Fabric | 420D Oxford cloth, listed as waterproof |
| Listed size | 37 in long x 18 in wide x 47 in high |
| Cylinder range named | 20 to 80 cu ft |
| Features | Adjustable drawstring, vents, two handles, storage bag |
Why Height Matters for a Cart Cover
Most cart covers sold for welding are around 40 inches tall. If your cart carries a taller bottle, or has a tall handle or a wire spool on top, a short cover will not close over it. At 47 inches this one gives you more headroom, which also means it can look baggy on a short cart.
The cover uses 420D Oxford cloth, which is slightly lighter than 500D fabric. For a covered garage that is usually enough. In open sun or heavy rain, a thicker material may last longer.
How to Check the Fit
- Measure height first. Stand a tape beside your loaded cart from floor to the highest point (cylinder cap, handle or machine top).
- Measure length and width at the widest point. Include wheels and handles.
- Compare with the cylinder range. The listing mentions cylinders from 20 to 80 cu ft. Check the cylinder you actually use, and remember that cylinder names such as 80 cu ft are not the same across gases.
- Look at the handles. The two cover handles make it easier to pull on and off a tall cart.
- Check the drawstring. You need to be able to pull it tight below the wheels or around the base.
Pros and Limitations
Pros
- Taller cut for carts with cylinders.
- Adjustable drawstring helps in wind.
- Vents reduce trapped moisture.
- Folds into its bag for storage.
Limitations
- Not for hot equipment. Let everything cool first.
- A tall cover on a short cart flaps and lets in water.
- It does not make a cart weatherproof if rain pools at the base.
- Waterproof coatings fade with sun and age.
Maintenance Tips
- Dry the cover completely before folding into the bag to prevent mildew.
- Clean with a soft brush or cloth and mild soap. Hand wash only; avoid machine washing and bleach.
- Keep sharp edges and hot metal away from the fabric.
- Store the cover in a cool, dry place out of direct sun.
- Check seams and the drawstring channel for wear every few months.
If your cart is shorter, the Iptienda 40 inch cover may fit better. For a cart to go under the cover, see the AosBet welding cart and the heavy-duty 3-tier cart.
Alternatives and Related Guides
- Iptienda welding cart cover – 500D fabric, 40 in tall
- BRAVECOW welding machine cover – machine-specific cover with a front pocket
- Lincoln Electric welder generator cover – another machine cover to compare
- Heavy-duty welding cart – a cart that may suit this cover
Frequently Asked Questions
What size is this welding cart cover?
The listing gives 37 inches long, 18 inches wide and 47 inches high. Measure your loaded cart and choose a cover that clears the cylinder cap and handle without being much larger.
Does 420D mean it is waterproof?
No, 420D describes the thread thickness. Waterproofing comes from the coating or lamination. The listing says waterproof, but seams and open hems still need care and the cart should not sit in pooling water.
Can I use the cover outdoors all year?
It is designed to resist rain, snow and dirt, but sun and age wear any coating. For long-term outdoor storage, keep the cart under a roof or at least off wet ground and check the cover often.
Why is there a storage bag?
The bag lets you fold the cover small when you are using the cart, which keeps it clean and out of the way. Dry the cover first so it does not mildew inside the bag.
Bottom Line
This 420D cover is a good match for carts that need extra height, such as those carrying a tall cylinder. Measure before you buy, and cover the cart only when it is cool and the gas is shut off.
