The Flange Wedge Steel Tool Set is a 2 pack of triangular steel wedges, each listed at 3.94 x 1.97 inches, with a listed weight of about 15.8 oz. Wedges like these are used in the shop to open a gap, level a part or hold work in alignment while you tack or weld. This page covers the listed specs, how to use steel wedges safely and where they fall short.
Flange Wedge Steel Tool Set: Quick Verdict
- Best for: shop fit-up, spacing and leveling jobs where a simple steel wedge does the job.
- Skip if: you need a rated lifting or jacking tool, or a specific pipe-flange alignment kit with documented dimensions.
- Check first: thickness, taper and quantity on the Amazon listing.
Specifications as Listed
| Item | Detail |
|---|---|
| Quantity | 2 pack, per the listing |
| Shape | Triangular prism wedge |
| Size | 3.94 x 1.97 inches, per the listing |
| Weight | About 15.8 oz, per the listing |
| Material | Steel |
| Listed uses | Leveling and support, such as lathe welding and surface leveling |
| Thickness, taper and load rating | Not stated here; check the listing |
How Steel Wedges Are Used
- Opening a gap: tap the thin end into a seam to set a root gap before tacking.
- Leveling: slide a wedge under a part, check it with a level, then tack or clamp.
- Alignment: use a pair from opposite sides to draw two parts into line.
- Support: hold a part steady while you weld.
Always clamp or tack the work as well, because a wedge can slip under vibration or heat. Never put any part of your body under a load that rests only on wedges.
Pros and Cons
Pros
- Solid steel construction suits shop use
- Simple, compact tool that costs little to carry
- Useful for leveling, spacing and fit-up
Cons
- Thickness, taper and load rating are not stated here
- Not a lifting or jacking device
- Steel can rust if stored damp
Related guides: 4 pcs flange wedge review | steel flange wedge set review | 6 pcs flange wedge set review
Frequently Asked Questions
What size are these steel wedges?
The listing gives 3.94 inches long by 1.97 inches wide for each triangular wedge, which is about 100 mm by 50 mm. Check the listing for thickness and taper before ordering, because those decide how much gap a wedge can open.
Is the set sold as a pair?
The set is listed as a 2 pack. Confirm the quantity on the current listing before ordering, since seller bundles can change.
What are flange wedges used for?
In fabrication, a wedge is driven into a gap to open it, level a part or hold two parts in alignment while you tack. Pipe fitters use the same idea to line up flange faces and bolt holes. Check the listing for the uses this set is sold for.
Can steel wedges be used for leveling machinery?
The listing frames them for leveling and support work such as lathe welding and surface leveling. They are not a rated lifting or load-bearing device, so do not rely on them to hold a heavy load that could fall.
How do I look after steel wedges?
Wipe them clean after use, keep them dry and add a light coat of oil if you store them for a long time. Discard a wedge that is bent, chipped or mushroomed at the strike face.
Conclusion
The Flange Wedge Steel Tool Set is a simple pair of steel wedges for shop leveling, spacing and alignment. Check the listing for thickness and taper, and use clamps as well, because wedges are not rated for load.
