The Eddyeweld 28pcs titanium MIG parts kit is a consumables bundle for Binzel-style MIG torches: 20 contact tips for 0.035 in (0.9 mm) wire, 2 gas nozzles, 5 tip holders and 1 swan neck. It is useful if you burn through tips and want spares, but only if it fits your torch. The details below come from the product listing and were not hands-on tested, so confirm thread size and neck fit before you order.
Key Takeaways
- 28 pieces: 20 tips, 2 nozzles, 5 tip holders, 1 swan neck.
- Tips are for 0.035 in (0.9 mm) wire. They will not suit other wire sizes.
- Binzel-style does not guarantee fit. Torch models differ in thread size, neck shape and nozzle seat.
Eddyeweld 28pcs Titanium MIG Parts Specs
| Kit contents | 20 contact tips, 2 gas nozzles, 5 tip holders and 1 swan neck (28 pieces), per the listing |
| Wire size | 0.035 in / 0.9 mm contact tips, per the listing |
| Torch style | Described as Binzel style; confirm your torch model and thread size before ordering |
| Material | Sold as a titanium MIG parts set; the listing does not give a precise alloy for each part |
| Package weight | About 10.6 oz per the listing |
| Package size | About 6.69 x 3.94 x 1.57 in per the listing |
| Amazon ASIN | B0D5QK7ZQW |
Fit Checklist Before You Buy
- Identify your torch brand and model, and the contact tip thread (M6 and M8 are both common on Euro-style torches).
- Confirm your wire size is 0.035 in. If you run 0.030 in or 0.045 in, buy matching tips.
- Compare your existing nozzle and tip holder with the listing photos for size and shape.
- Check the swan neck length and angle against your torch if you plan to swap it.
- Check that tips are suitable for your wire type: solid wire and flux-core can wear tips differently.
How to Install the Parts
- Switch off the welder and unplug it or disconnect the torch, and let the torch cool.
- Remove the nozzle, then unscrew the old contact tip and tip holder.
- Fit the new tip holder snugly, then the contact tip. Hand tight plus a small turn with the tip wrench is enough; overtightening can strip threads.
- Check that the nozzle seats fully so shielding gas flows evenly.
- Feed wire through, trim it, and make a short test bead on scrap.
If the wire feeds poorly even with a new tip, the liner may be worn. See our guide on how to replace a MIG gun liner, and compare options in our MIG welding contact tips review.
How Long Do Contact Tips Last?
There is no fixed life. Tip wear depends on amperage, wire type, duty cycle, spatter and feed alignment. Replace a tip when the hole is worn oval, the arc becomes unstable, or the wire burns back into the tip.
Pros and Cons
Pros
- Large pack of spare tips in one kit
- Includes nozzles, tip holders and a swan neck
- Compact kit
Cons
- Fit depends on your exact torch; Binzel style covers several designs
- Material details are limited on the listing
- 0.035 in only
Frequently Asked Questions
Are Eddyeweld parts compatible with other MIG torch brands?
They are described as Binzel style, so they may fit some Euro-style torches. Check your torch model, thread size and nozzle seat before ordering; do not assume cross-brand fit.
What are Eddyeweld MIG parts made of?
The kit is sold as titanium parts, but the listing does not give a full material breakdown. Check the listing details and product photos.
How long do the contact tips last?
It varies. Amperage, wire type, spatter and feed alignment all affect wear. Replace the tip when the bore is worn, the arc is erratic or the wire burns back.
Can I use these parts for aluminum welding?
The tips are sized for 0.035 in wire. Aluminum wire generally needs tips and a feed setup meant for it, so check compatibility before using them with aluminum.
What is the return policy?
Return terms are set by the seller on Amazon at the time of purchase; check the listing for current details.
Bottom Line
A cheap way to stock up on 0.035 in tips and spare parts, if your torch is a match. Verify torch model, thread size and wire size first, then check the current Amazon price.
