🔧 Practical welding guides, tested in a real garage
Welding Gloves & Apparel Reviews

Comeaux Caps Reversible Welding Cap Review: 7 1/4 Size

Comeaux Caps reversible welding cap - product photo

The Comeaux Caps reversible welding cap is a six-panel cotton-style work cap with a medium crown and a soft brim, made to sit under a welding helmet and cover the ears and neck. It suits welders who want a comfortable, low-profile head cover for long sessions. Check the fabric and fire-resistance details on the listing before you treat it as flame-retardant, because this page relies on listing details only and was not hands-on tested.

Comeaux Caps Reversible Welding Cap: Key Specs

Item Per the listing
Style Six-panel reversible cap
Crown Medium crown
Brim Soft brim
Coverage Covers ears and neck
Size 7 1/4 mentioned in the listing; confirm which size you select
Color Solid black fabric mentioned
Fabric and fire resistance Not clearly stated in the details we have; check the listing

Check price on Amazon

Key Takeaways

  • Reversible design gives you two looks in one cap and lets you rotate wear.
  • Medium crown with a soft brim covers the ears and neck and tucks under most helmets.
  • Fabric treatment is not stated clearly, so do not assume the cap is flame-retardant.
  • Size matters: a cap that is too tight or loose can shift under the helmet headgear.

Who Should Buy It

  • Welders who want a soft, snug cap under an auto-darkening helmet.
  • Hobby and garage welders who want ear and neck coverage from stray sparks.
  • Anyone who prefers a reversible cap so they can wear either side out.

Skip it if you do heavy overhead welding, where a flame-resistant hood or balaclava gives more complete coverage.

How to Check the Fit

  1. Measure around your head about an inch above your eyebrows and ears.
  2. Compare the number to the size options on the listing.
  3. Put the cap on under your helmet headgear and check that the brim does not push the helmet forward.
  4. Confirm that the cap covers the tops of your ears and the back of your neck.

Pros and Limitations

Pros

  • Reversible, so two looks and more even wear.
  • Soft brim that stays out of your line of sight.
  • Covers the ears and neck, common spatter targets.

Limitations

  • Fire resistance is not clearly stated.
  • Plain cotton scorches under heavy spatter.
  • Sizing varies between makers, so check the chart before ordering.

Check price on Amazon

Safety and Care

  • Avoid synthetic caps, because polyester and nylon can melt onto skin.
  • Replace the cap if you see holes, burn-through or thin spots.
  • Hand wash in cold water with mild detergent and air dry.
  • Wear the cap in addition to your helmet, jacket and gloves, never in place of them.

Related reading: Comeaux Welding Cap Review (another Comeaux cap listing) | Reversible Welding Cap Review: Safety Meets Comfort | ARCCAPTAIN Reversible Welding Cap Review

Frequently Asked Questions

Is the Comeaux reversible cap flame resistant?

The listing details we have do not clearly say. Plain cotton can scorch or ignite from hot spatter, so check the listing for any flame-retardant treatment before relying on it.

What size is this Comeaux welding cap?

The listing mentions a 7 1/4 size and a medium crown. Measure your head and confirm the size you select, since caps that are too tight or loose can slip under a helmet.

How do I wash a welding cap?

Hand wash in cold water with mild detergent, skip bleach and air dry. Follow the care label, because harsh washing can reduce any flame-retardant finish.

Can I wear a welding cap without a helmet?

No. A cap adds a layer for your hair, ears and neck, but it does not protect your eyes and face. Always weld with a proper filter lens helmet.

The Bottom Line

The Comeaux Caps reversible welding cap is a simple, comfortable head cover with a soft brim and ear and neck coverage. Confirm the size and fabric on the listing and pair it with proper welding PPE.

Check price on Amazon

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *