Disclosure: As an Amazon Associate I earn from qualifying purchases. Buying through these links costs you nothing extra.
This 8ft no gas MIG gun is a replacement torch for small gasless flux-core welders. The listing names Lincoln Century and Titanium Easy-Flux models as compatible and includes eight .030 contact tips. It is worth considering if your original gun is worn or short and your welder is on the compatibility list. Skip it if you cannot confirm that your exact model matches, because the connector and trigger wiring differ between welders.
8ft No Gas MIG Gun: Key Specs
| Spec | Detail |
|---|---|
| Type | Replacement gun for gasless (flux-core) wire-feed welders |
| Length | 8 ft |
| Tips included | 8 contact tips, .030 in (per the listing) |
| Model number on the listing | 8FT MIG GUN |
| Listed weight and size | About 2.07 lb and 11.06 x 8.03 x 2.09 in; these look like package figures, not the gun itself |
| Compatibility claimed | Lincoln Century 80GL, Lincoln FC90 and 90i, Lincoln FC flux-cored models K3493-1, K2185-1, K5256-1 and K2501-1, Titanium Easy-Flux 125 (56355, 56359, 57861), others may fit |
| Manual | The listing does not appear to include a user manual |
Compatibility is the manufacturer-claimed list from the listing. Verify it against your welder manual or parts diagram before ordering.
Who Should Buy This 8ft MIG Gun
- Owners of a listed Lincoln Century or Titanium Easy-Flux welder whose original gun is worn or damaged.
- Welders who want more reach than a stock gun without moving the machine as often.
- Shops that want spare .030 contact tips in the box.
Skip it if your welder is not on the list, if you run .035 wire without changing tips, or if you need a gas-shielded MIG gun. This is a no gas gun for flux-core wire.
Fit Checklist Before You Order
- Confirm your welder model number on the data plate and match it to the listed models.
- Compare the old gun connector, liner position and trigger wiring with the listing photos.
- Check the wire size. The tips are .030 in; for .035 wire you need matching tips and drive-roll groove.
- Remember that the FC90 and 90i are different models. Do not assume a gun for one fits the other without checking.
- Keep the original gun until the new one feeds wire smoothly and passes a scrap test.
Installation and Safety Notes
- Unplug the welder before opening the wire-feed compartment or removing the gun.
- Photograph the original connections and wire path first.
- Straighten the cable before feeding wire through the liner.
- Point the gun away from people when feeding wire. The wire and tip can be live when the trigger is pulled.
- If a connection needs electrical modification you cannot identify, stop and ask a qualified technician.
For a gun that is also sold for the Century FC-90, compare the Eddyweld 8Ft MIG gun review. For tips and nozzles see the ARCCAPTAIN MIG contact tip review.
Pros and Limitations
Pros: 8 ft of reach, eight tips included, and a long list of claimed compatible flux-core welders.
Limitations: compatibility is claimed rather than verified here, no manual, listing dimensions that look like package sizes, and .030 tips only. Buyer feedback is worth checking on the listing page.
Frequently Asked Questions
Which welders does this 8ft no gas MIG gun fit?
The listing names Lincoln Century 80GL, Lincoln FC90 and 90i, several Lincoln FC flux-cored models and the Titanium Easy-Flux 125 range. Treat that as a claim and verify it against your welder manual before ordering.
Can I use it for gas-shielded MIG welding?
No. It is sold as a no gas gun for flux-core wire. For gas-shielded MIG you need a gun and welder set up for shielding gas.
What wire size does it use?
The included tips are .030 in. If you use .035 flux-core wire, make sure the contact tip, liner and drive-roll groove match that size.
Is it good for aluminum welding?
No. A gasless flux-core gun is not made for aluminum. Use a purpose-built aluminum setup.
Does it come with a manual?
The listing does not appear to include one, so take photos of your original connections before you swap guns and use your welder manual for setup.
Final Thoughts
This is a budget way to replace a worn gun on a listed gasless welder and gain reach. Confirm your exact model, wire size and connector before ordering, and keep the original gun until the new one is tested.
{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “Which welders does this 8ft no gas MIG gun fit?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The listing names Lincoln Century 80GL, Lincoln FC90 and 90i, several Lincoln FC flux-cored models and the Titanium Easy-Flux 125 range. Treat that as a claim and verify it against your welder manual before ordering.”
}
},
{
“@type”: “Question”,
“name”: “Can I use it for gas-shielded MIG welding?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “No. It is sold as a no gas gun for flux-core wire. For gas-shielded MIG you need a gun and welder set up for shielding gas.”
}
},
{
“@type”: “Question”,
“name”: “What wire size does it use?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The included tips are .030 in. If you use .035 flux-core wire, make sure the contact tip, liner and drive-roll groove match that size.”
}
},
{
“@type”: “Question”,
“name”: “Is it good for aluminum welding?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “No. A gasless flux-core gun is not made for aluminum. Use a purpose-built aluminum setup.”
}
},
{
“@type”: “Question”,
“name”: “Does it come with a manual?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The listing does not appear to include one, so take photos of your original connections before you swap guns and use your welder manual for setup.”
}
}
]
}
