As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The Jackson Safety 5 ft welding curtain is a tear-resistant PVC screen, listed at 5 feet in height, with grommets and a choice of colors. The listing says it reduces arc light, blocks UV and meets ANSI/FM 4960 and NFPA 701 flame standards.
A shorter curtain like this works well as a half-height screen over a bench, welding table or cart, where you want to block sightlines at arc level without closing off the room. It will not screen a standing worker’s whole body, so use a taller size if you need full-height coverage. Details here come from the Amazon listing, not testing.
At a Glance
| Item | Detail (per the Amazon listing) |
|---|---|
| Product | Jackson Safety welding curtain (this listing: 5 ft height) |
| Material | Tear-resistant PVC (vinyl) |
| Mounting | Grommets: about 8 in apart on one side, 16 in apart on the height sides |
| Size note | Listing says dimensions can vary by up to about 3 in |
| Standards named | ANSI/FM 4960, NFPA 701; California Fire Marshal |
| Colors | Several; check the listing for the one you select |
Check Current Price on Amazon →
Why a 5 ft Curtain
Full 6 to 7 foot curtains are common for booths. A 5 foot curtain is more of a table-top or cart-height screen. Most welding happens at bench height, so a 5 foot curtain placed at the edge of a table can intercept the arc, spatter and glare while leaving the space visible and airy above.
It is also easier to hang. You can run a rail across the back of a bench or use the grommets with hooks on a pipe frame, rather than hanging a floor-to-ceiling system.
How to Check It Fits Your Setup
- Check the width. The listing mentions the height as 5 ft. Look at the size menu on the product page to see the available widths.
- Plan where the arc will be. Stand the table in position, hold a tape at arc height, and see where the 5 ft line falls. If your arc is high, you need a taller curtain.
- Pick the color. Several colors are listed. A tinted curtain reduces visible light. Choose a tint that lets you see the table clearly if others need to monitor the area.
- Check the grommets. Grommets sit about 8 in apart on one side and 16 in apart on the others. Plan your hooks or ties to match.
- Allow for size tolerance. The listing mentions a few inches of variation. Leave a little margin in your frame.
View Jackson Safety Curtain on Amazon →
Pros and Limitations
Pros
- Convenient height for table and cart screens.
- Tear-resistant PVC is easy to wipe clean.
- Flame standards are named in the listing.
- Color choices.
Limitations
- Not full-height. Light can spill over the top.
- Vinyl can melt under heavy spatter.
- Does not remove fumes. The listing describes it as helping contain them, but you still need extraction.
- Color tint is not the same as a rated helmet lens.
Setup and Safety
- Hang it on a sturdy frame and test by pulling on the corners.
- Keep the curtain a safe distance from the arc and heat sources.
- Wipe with a damp cloth and mild soap.
- Inspect for pinholes and tears before use.
- Pair it with a welding blanket on the table side, such as the NEIKO 10908A, when spatter is heavy.
Alternatives and Related Guides
- Jackson Safety 6 x 8 ft transparent curtain – a taller panel
- Jackson Safety 6 x 10 ft curtain – a wider, taller panel
- VEVOR 6 x 8 ft welding curtains – a red alternative
- OLBRUS welding table – a bench to screen with a half-height curtain
Frequently Asked Questions
How tall should a welding curtain be?
It depends on where the arc is. A 5 ft curtain suits bench-height work and half-height screens. For full-height protection in a booth, use a 6 to 7 ft curtain and mount it a few inches above the floor.
Does a welding curtain stop fumes?
No. A curtain blocks light and some spatter. Fume control needs ventilation, a fan or extraction at the source, and sometimes a respirator, especially on stainless or galvanized steel.
What do ANSI/FM 4960 and NFPA 701 mean?
They are fire-performance standards relating to welding screens and flame-resistant fabrics. The listing says the curtain meets them. For regulated workplaces, ask your safety officer which standards apply.
Can I choose the color?
The listing offers several colors. Tint affects how much light passes and how easily you can see through the curtain. Pick a color that matches your visibility needs, and confirm the color you want in the product options.
Bottom Line
The 5 ft Jackson Safety curtain is a handy half-height screen for benches and carts. Check the width and color options, mount it securely, and treat it as a supplement to proper PPE and ventilation.
See Jackson Safety Curtain on Amazon →
