As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The Jackson Safety welding curtain in the 6 x 10 ft size is a 14 mil vinyl screen with grommets, listed at 120 inches long by 72 inches wide. It is meant to stop stray arc light and spatter from reaching people working near a welding station.
It suits a shared garage, school shop or small fabrication bay where you want to screen off one welding corner. It is not a replacement for a welding helmet, and it is not a fire barrier for open flames. Details here come from the Amazon listing, not our own testing.
At a Glance
| Item | Detail (per the Amazon listing) |
|---|---|
| Product | Jackson Safety welding curtain (this listing: 6 x 10 ft) |
| Listed size | 120 in x 72 in |
| Thickness | 14 mil vinyl (PVC) |
| Mounting | Grommets: about 8 in apart on one side, 16 in apart on the others |
| Standards named in listing | ANSI/FM 4960, NFPA 701 and California Fire Marshal; verify on the label |
| Purpose | Reduce arc light and contain spatter around a weld area |
Check Current Price on Amazon →
What This Curtain Does and Does Not Do
A welding curtain is a bystander-protection product. Tinted or see-through vinyl cuts down the bright arc light and ultraviolet that can cause flash burns (arc eye) in people who are not wearing a helmet. A curtain also catches some stray sparks and spatter.
What it does not do: it does not protect the welder, who still needs a proper helmet, gloves and clothing. It is not designed to withstand continuous direct spatter or a torch flame, and hot slag can melt or mark vinyl. Keep the curtain a safe distance from the arc and out of the line of heavy spatter, as the manufacturer’s instructions direct.
How to Check the Size and Mounting
- Measure the opening. The listing gives 120 x 72 inches. Decide whether 72 inches is your height or your width, then check that the curtain will hang low enough to leave only a small gap at the floor.
- Plan the hanging rail. Grommets on one side are listed about 8 inches apart and about 16 inches apart on the other sides. Use pipe, a track, chain or hooks that are strong enough for vinyl and do not wear through the grommets.
- Check airflow. A closed-in booth traps fumes. Welding fumes must be removed with ventilation or local extraction, not just screened off.
- Confirm the colour and the tint. The listing photos should show the tint. If you need to see the welder, choose a tint designed for that.
- Check the standards on the label. The listing mentions ANSI/FM 4960 and NFPA 701. For commercial or school use, ask your safety officer what applies.
View Jackson Safety Curtain on Amazon →
Pros and Limitations
Pros
- Large 6 x 10 ft coverage for a small bay or corner.
- 14 mil vinyl is flexible and easy to fold or roll.
- Grommets make hanging simple.
- See-through vinyl helps coworkers and supervisors see the work area.
Limitations
- Vinyl can melt or burn under heavy spatter, so it is a screen, not a heat shield.
- Light filtering varies with colour. It will not make staring at the arc safe.
- It does not capture fumes. Use extraction.
- Vinyl stiffens in cold weather and may crack if folded hard when cold.
Installation and Care
- Hang the curtain so the bottom edge is a few inches above the floor and well away from the arc.
- Inspect for burn holes and scratches before each use and replace damaged curtains.
- Clean with mild soap and water, not solvents.
- For heavier spatter or grinding, a carbon felt welding blanket is a better heat shield.
Alternatives and Related Guides
- Jackson Safety 6 x 8 ft transparent curtain – a smaller listing in the same family
- Jackson Safety curtain, 5 ft height – another size option
- VEVOR welding curtains – a competing 6 x 8 ft set
- Welding helmet review – the PPE the welder still needs
Frequently Asked Questions
What is a welding curtain for?
A welding curtain screens bystanders from arc light and some spatter. It helps prevent arc flash in people nearby, but the welder still needs a helmet, gloves and protective clothing, and fumes still need ventilation or extraction.
Is a 14 mil vinyl curtain flame resistant?
The listing says it meets flame standards, but vinyl can still melt or char under heavy spatter. Keep it away from the arc, follow the maker instructions, and use a welding blanket where direct slag or grinding sparks are expected.
How do I hang a welding curtain?
Use the grommets with hooks, zip ties, chain or a pipe rail strong enough for the weight. Space attachments evenly, keep the bottom a few inches off the floor, and make sure nothing hot touches the vinyl.
Can I use it in the open air?
You can in light conditions, but wind can whip the vinyl into the arc area and sunlight degrades vinyl. Anchor the lower edge, avoid sharp edges, and take it down in bad weather.
Bottom Line
This Jackson Safety curtain is a practical way to screen a welding corner and protect people nearby. Check the size, mounting plan and ventilation, and remember that it supplements, not replaces, proper welding PPE.
See Jackson Safety Curtain on Amazon →
