🔧 Practical welding guides, tested in a real garage
MIG & TIG Torch Parts Reviews

4pcs 5mm Welding Tip Nozzles Review: Hot Air Plastic Welding

5mm hot air welding nozzles - product photo

These 5mm hot air welding nozzles are a four-piece stainless steel set for hot air plastic welding guns, not for arc welding metal. The listing describes a round 5 mm nozzle plus triangular and tacking nozzles, and names jobs such as roofing membrane and vinyl flooring seams. They are worth a look only if your hot air gun accepts the nozzle mount. This review is based on the Amazon listing, not hands-on testing. These 4pcs 5mm welding tip nozzles fit hot air plastic welders.

5mm Hot Air Welding Nozzles at a Glance

Item Per the listing
Pieces 4 nozzles
Material 304 stainless steel
Nozzle types Round 5 mm, triangular and tacking, per the listing
Base diameter 32 mm
Weight 3.84 oz
Suggested uses Roofing membrane, vinyl flooring and similar plastic seams
Gun compatibility Check the listing and your gun manual

Check price on Amazon →

What These Nozzles Do

A hot air gun blows heated air through a nozzle. The nozzle shape decides where the heat goes. A round nozzle is a general-purpose tip. A triangular speed nozzle presses the filler rod into the seam while heating both surfaces. A tacking nozzle focuses heat on a small spot to hold two pieces in place before you weld the full seam.

This is plastic and membrane work, such as PVC or TPO roofing and vinyl floor seams. It is a different process from MIG, TIG or stick welding, and these tips do nothing for steel or aluminum.

How to Check They Fit Your Gun

  1. Measure your nozzle mount. The listing gives a 32 mm base diameter. Compare it with the outer or inner diameter of your gun’s nozzle end.
  2. Look at how the nozzle attaches. Some guns use a slip-on fit, others use a clamp or screw collar. Make sure the nozzle will sit firmly and not wobble.
  3. Match the nozzle to the job. Use the triangular tip for rod welding and the tacking tip for holding parts.
  4. Check your gun’s heat range. Set the temperature to suit the plastic. Test on scrap first.
  5. Confirm what is in the box. The listing says four pieces. Check the product page for the exact shapes before you order.

Pros and Limitations

Pros

  • Stainless steel construction is suited to repeated heating.
  • Round, triangular and tacking shapes cover common seam work.
  • Light, at 3.84 oz per the listing.

Limitations

  • Fit depends on your gun, and the listing does not name specific models.
  • Not for metal welding.
  • Nozzles stay hot after use and can burn skin or melt nearby material.
  • Specs are from the listing, so confirm them on the page.

Safety Notes

  • Let the nozzle cool fully before changing it, or use heat-resistant gloves and pliers.
  • Work with ventilation. Overheated PVC and other plastics can give off harmful fumes.
  • Keep the hot nozzle away from flammable material and set it on a stand when you pause.
  • Use eye protection and follow your gun maker’s manual.

Check price on Amazon →

Related guides: hot air welding nozzles 3-piece set, stainless steel hot air gun nozzles and the 1600W hot air plastic welder.

Frequently Asked Questions

Are these nozzles for metal welding?

No. They are for hot air plastic welding guns, used on materials such as PVC and TPO membrane or vinyl flooring. They do not work with MIG, TIG or stick welders.

Will they fit my hot air gun?

Not necessarily. The listing gives a 32 mm base diameter, but guns differ in how the nozzle mounts. Measure your gun’s nozzle end and check the product page before ordering.

What is a tacking nozzle used for?

A tacking nozzle concentrates heat on a small spot so you can hold two pieces together before welding the full seam with a speed or round nozzle.

Can I use them on vinyl flooring and roofing membrane?

The listing names roofing membrane and vinyl flooring as uses. Match the temperature to the material and test on scrap first, because too much heat can scorch or warp plastic.

Conclusion

This set is a low-risk extra for anyone who already owns a compatible hot air gun and does plastic or membrane seams. Check the mount size first, and use a different tool for metal.

Check price on Amazon →

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *