As an Amazon Associate I earn from qualifying purchases. Buying through these links costs you nothing extra.
The LUORNG torch trigger switch pack is six replacement trigger switches listed for 15AK, 24KD and 36KD MIG torches, in red and black. It is a good buy only if the switch matches the one in your torch handle, because torch families share names but not always internal layouts. A new switch fixes a bad trigger, not faults in the cable, liner or machine. This review is based on the Amazon listing, not on our own testing.
Quick specs at a glance
| Item | Detail |
|---|---|
| Brand | LUORNG |
| Part number | 36294-GTSC-R6, per the listing |
| Product | MIG torch trigger replacement switch |
| Quantity | 6 |
| Listed fit | 15AK, 24KD and 36KD MIG torches |
| Colors | Red and black |
| Package size and weight | 3.62 x 2.4 x 0.43 in and 1.41 oz, per the listing |
| Not included | A torch, cable or wiring harness |
Check the current price on Amazon →
Confirm the LUORNG torch trigger switch fits your torch
- Open your torch handle (with the machine unplugged) and compare the old switch with the listing photos
- Check the body shape, button position and terminal style
- Make sure there is room in the handle for the new switch
- The package size above is for the whole pack, not for a single switch
If the switch does not match, do not improvise. Check your torch maker’s parts list.
How to replace a trigger switch
- Unplug the welder and let the torch cool
- Open the handle following the torch maker’s instructions
- Photograph the old switch, wires and routing before you remove anything
- Remove the old switch and fit the new one on the same terminals
- Make sure wires are secure, insulated and not pinched when you close the handle
- Reassemble, then test the trigger with the torch fully assembled
Never work on a live welding circuit with the handle open. If the connections are unclear, ask a welding technician.
Is a switch the real problem?
A sticky, intermittent or dead trigger can also come from damaged wires, a faulty cable or connector, or the machine’s control circuit. Test those first if a new switch does not cure the fault.
Pros and limitations
Pros
- Six switches give you spares
- Listed for common 15AK, 24KD and 36KD torches
- Compact and easy to store with consumables
Limitations
- Compatibility must be checked physically
- Six is more than a one-torch shop needs
- No service life is listed
- Does not fix problems elsewhere in the torch or machine
Alternatives and related guides
- Miller 227798 trigger switch: a single OEM-style part
- Tweco Mini-Mig gun trigger switch
- 24-piece MIG gun accessory kit: tips and nozzles to keep on hand
Frequently Asked Questions
Which MIG torches does it fit?
The listing says 15AK, 24KD and 36KD. Compare your old switch and handle layout, because torches under the same family name can differ.
How many switches are included?
Six, according to the listing.
Will it fix every trigger problem?
No. It replaces a faulty switch. Wiring, cables, connectors and the machine’s control circuit can cause the same symptoms.
Is installation difficult?
It is mechanically simple on many torches, but follow your torch maker’s instructions, disconnect power and note where the wires go.
How long will the switch last?
The listing gives no service life. Life depends on use, installation, heat and contamination.
Final verdict
The LUORNG torch trigger switch pack is a practical set of spares for owners of compatible 15AK, 24KD or 36KD torches. Skip it if you cannot confirm the fit or only need one OEM part. Check the listing details against your torch before you order.
Check the current price on Amazon →
