WeldingCity contact tips are replacement MIG contact tips, listed in wire sizes from 0.023 to 0.052 inch and rated by the seller for use up to 400 amps. This WeldingCity contact tips review is based on the Amazon listing: they suit owners of Lincoln Magnum or Tweco-style guns who want spare tips, but only after matching tip type and wire size.
Quick specs at a glance
| Item | Per the listing |
|---|---|
| Type | MIG welding contact tips (threaded) |
| Material | Copper alloy |
| Sizes | 0.023 to 0.052 in (choose your wire size) |
| Bore tolerance | +/- 0.003 in, per the listing |
| Amperage | Up to 400 A, per the listing |
| Listed gun families | Lincoln Magnum, Tweco Professional style |
Check current price on Amazon →
What contact tips do and who these suit
The contact tip transfers welding current to the wire as it exits the gun, so it wears every time you weld. A worn bore causes arc wander, burn-back and poor feeding.
These are for MIG users who go through tips regularly, from hobby garages to light fabrication. Buy the size that matches your wire, not the biggest one in the pack range.
How to check fit and size
- Note your gun model and series. Magnum 100L, 200, 300 and Tweco #1, #2 and #4 style guns do not all use the same tip.
- Measure or read the tip length and thread on your current tip.
- Pick the bore that matches your wire diameter (0.023, 0.030, 0.035, 0.045 inch and so on).
- Check whether you weld steel solid wire, flux core or aluminum, since each can need a different bore.
- Make sure the pack count and size on the listing match what you want.
The listing’s compatibility claim is general. Always verify the tip style for your specific gun before relying on it.
Pros and limitations
- Pros: Wide size range; a bore tolerance spec is stated; a basic consumable that is inexpensive to stock.
- Limitations: The listing does not list copper grade, hardness or tip length that we could verify; fit with a named gun is on you to confirm; no aluminum-specific guidance.
Getting longer tip life
- Use the correct tip size and keep drive roll tension moderate.
- Keep the tip tight in the diffuser so it conducts and cools properly.
- Clear spatter from the nozzle and tip with a tool made for it, not a hammer.
- Replace tips before the bore wears oval rather than pushing them to failure.
- Use clean wire and proper shielding gas for steel (commonly argon/CO2 mixes).
View these contact tips on Amazon →
Alternatives and related guides
- Looking for another WeldingCity listing? See the WeldingCity MIG gun contact tip review.
- Need a tip-and-nozzle bundle? Read the MIG gun accessory kit review.
- Replace the nozzle at the same time: Smart Weld MIG nozzles review.
Frequently Asked Questions
Which contact tip size should I use?
Match the tip bore to your wire. Typical solid-wire pairings are 0.023 in tip for 0.023 wire, 0.030 for 0.030, 0.035 for 0.035 and 0.045 for 0.045 wire. Follow the wire maker’s guidance for flux-core or other wire types.
Do WeldingCity tips fit my gun?
The listing mentions Lincoln Magnum and Tweco Professional-style guns, but those families use different tip styles and lengths. Check your gun’s model, tip length and thread against the listed tip type, and verify the listing before ordering.
Can I use copper contact tips for aluminum wire?
Aluminum needs a tip sized slightly larger than the wire to allow for thermal expansion, and many welders use tips made for aluminum. Check the listing, and match it to your wire diameter, gun and feed setup before trying it.
When should I replace a contact tip?
Replace it when the bore looks oval or oversized, the arc becomes unstable, the wire burns back to the tip, or the tip is hard to feed through. Tips are cheap relative to the weld defects a worn one can cause.
Verdict
A sensible consumable if you pick the right bore and confirm your gun’s tip style. If you cannot confirm the thread and length, check your manual first.
Check current price on Amazon →