As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The YesWelder 150A spool gun is a 10 foot aluminum MIG spool gun sold as fitting select Lincoln welders. This YesWelder 150A spool gun review, based on the Amazon listing, is for owners who already have a compatible Lincoln machine and want to weld aluminum, because it only makes sense if your model and connector match.
Quick specs at a glance
| Item | Per the listing |
|---|---|
| Type | Spool gun for aluminum MIG welding |
| Rating | 150 A |
| Cable | 10 ft |
| Drive rolls | Dual V-knurled |
| Trigger | Full-travel mechanical, glove friendly |
| Machines named | Lincoln Power MIG 210MP, 211i, 140C, SP-180T |
Check current price on Amazon →
What a spool gun does and who it suits
A spool gun carries a small spool of wire right at the gun, so soft aluminum wire only has to travel a few inches instead of through a long liner. That prevents the kinks and jams common when pushing aluminum through a standard cable.
This model suits hobbyists with a compatible Lincoln machine who want occasional aluminum welds. It is not for steel-only users, and it is not a universal gun.
How to check it fits your welder
- Match your exact machine model against the listing, not just the series name.
- Check that the machine can supply spool gun power and has the correct connector or plug.
- Verify the machine’s output and duty cycle are suitable for aluminum at your thickness.
- Check the spool size the gun takes and whether you can get aluminum wire in that size.
- Plan for 100% argon, a regulator and a suitable gas line for aluminum.
The listing says it fits select machines. If yours is not on the list, ask the seller before buying.
Pros and limitations
- Pros: Spool gun design suited to soft aluminum wire; 10 ft cable for reach; dual drive rolls; works with gloves.
- Limitations: Compatibility is limited, and buyers have mentioned inconsistent results on some setups. Aluminum welding still needs 100% argon, cleaning, and technique practice.
Aluminum MIG tips
- Clean oxide and oil from the aluminum with a stainless brush and solvent before welding.
- Push the gun instead of dragging it.
- Use 100% argon, not a steel mix.
- Set drive roll tension light so you do not crush the wire.
- Wear a proper auto-darkening helmet, gloves and ventilation because aluminum fumes and UV are intense.
View this spool gun on Amazon →
Alternatives and related guides
- Different spool gun brands: WeldPro 130A aluminum spool gun review.
- Another option is the Tooliom spool gun review.
- Aluminum wire for a spool gun: Azzuno magnesium aluminum MIG wire review.
Frequently Asked Questions
Which welders does the YesWelder 150A spool gun fit?
It is sold as fitting select Lincoln machines, and the listing names models such as the Power MIG 210MP, 211i, 140C and SP-180T. Connector type and control wiring vary, so confirm your exact model and the plug with the seller before ordering.
Do I need a spool gun for aluminum MIG welding?
Aluminum wire is soft and buckles in a long standard liner, so a spool gun that holds the spool at the gun is the common solution. Aluminum also needs 100% argon shielding gas and a clean joint; push-pull guns are another option.
What wire and gas does a spool gun use for aluminum?
Aluminum MIG uses aluminum wire (commonly ER4043 or ER5356, depending on the job) with 100% argon. Wire size and spool size must match the gun’s drive roll and the machine’s limits, so check the listing and your welder manual.
Is it good for beginners?
It can be used by a beginner, but aluminum is less forgiving than steel. Expect to practice surface cleaning, travel speed and push technique on scrap, and know that listing details such as warranty are limited to what the seller states.
Verdict
A practical add-on if you own one of the named Lincoln MIG machines and want to try aluminum. Skip it if you cannot confirm your model and connector.
Check current price on Amazon →
