🔧 Practical welding guides, tested in a real garage
MIG & TIG Torch Parts Reviews

Heat Gun Nozzles Kit Review: 4 Stainless Nozzles, 35 mm

Heat gun nozzles kit - product photo

Will this heat gun nozzles kit fit your heat gun? It might, but measure first. The kit has four stainless steel nozzles listed with a 35 mm universal size, meant to slide onto standard round heat gun barrels. This review is based on the Amazon listing, not hands-on testing. Check your gun’s barrel diameter and how the nozzles attach before you buy.

Quick Verdict

Best for: Owners of a standard round-barrel heat gun who want focused, wide and wrap-around heat for shrink tubing, paint and plastic work.

Watch out: Fit depends on your gun. Confirm the barrel size and attachment method first.

Check Price on Amazon →

Heat Gun Nozzles Kit Specifications

Specification Detail (per listing)
Contents 4 nozzles
Material Stainless steel
Listed size 35 mm universal fit
Listed package size 4.33 x 3.74 x 1.18 in
Listed weight 2.11 oz
Nozzle types Concentrator, wide, reflector (wrap-around) and shaping nozzle

Specs come from the seller listing and may change. Confirm them on the current listing before you buy.

Which Heat Gun Nozzle for Which Job

Nozzle Typical use
Concentrator Narrow, focused heat for small spots, tight areas and bending small parts
Wide Spreads heat over a larger area for paint, decals and adhesives
Reflector (wrap-around) Heats around a cable or tube for even heat-shrink tubing shrinkage
Shaping Directs heat to bend or shape plastic pieces

Compatibility Checklist

  • Measure the outside diameter of your heat gun barrel and compare it with the listed 35 mm size.
  • Check how the nozzles attach (slide-on, clip or screw). The listing should show this.
  • Make sure the gun is round-barrel. Oval, square or shrouded nozzles may not fit.
  • Confirm your gun’s maximum temperature is within what stainless steel nozzles can take. Stainless steel handles typical heat gun temperatures.
  • Unplug and let the gun cool completely before you fit or remove a nozzle.

Check Price on Amazon →

How to Use Heat Gun Nozzles Safely

  1. Unplug the gun and let it cool before swapping nozzles.
  2. Slide the nozzle fully onto the barrel and make sure it is seated and does not wobble.
  3. Start on the lowest heat setting and test on scrap.
  4. Keep the gun moving and hold the nozzle away from the surface, then move closer if needed.
  5. Never block the nozzle opening. Restricted airflow can overheat the gun.
  6. Set the gun down on a heat-safe surface. Nozzles stay hot for several minutes after use.

Wear gloves and eye protection. Do not use a heat gun near flammable materials, and ventilate the area when you heat paint or plastic. Older paint may contain lead, so test before you strip it.

Pros and Limitations

  • Pro: Four nozzle shapes cover most common heat gun jobs.
  • Pro: Stainless steel suits repeated heating.
  • Limit: Fit depends on your heat gun barrel and attachment.
  • Limit: No heat ratings, warranty or return terms were verified.
  • Limit: Nozzles are only accessories. They do not add heat control to a basic gun.

Frequently Asked Questions

Will these nozzles fit my heat gun?

They are listed as a 35 mm universal fit for standard round heat guns. Measure your barrel and check the attachment method on the listing before you order.

Which nozzle is best for heat-shrink tubing?

The reflector (wrap-around) nozzle is the usual choice because it heats around the tube evenly. Use low heat and keep the gun moving.

Can I use these nozzles for paint stripping?

Yes, the wide nozzle spreads heat for scraping paint. Keep the gun moving, and test old paint for lead before you strip it.

How hot do the nozzles get?

Very hot. They stay hot for several minutes after the gun is off, so let them cool before you touch or store them.

How do I clean stainless steel nozzles?

Let them cool, then wipe off residue with a soft cloth. Use mild detergent for stubborn marks and avoid abrasive pads that scratch the surface.

Bottom Line

This heat gun nozzles kit is a low-cost way to get focused, wide and wrap-around heat from a standard heat gun. Buy it only after you have measured your barrel and checked how the nozzles attach. Skip it if your gun has a non-round or shrouded barrel.

Check Price on Amazon →

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *