Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Keeping round tube, square tube, and flat plate positioned correctly can be one of the slower parts of welding-table setup. The Klutch Welding Table Workhold Accessory Base Kit gives you a 32-piece group of locating and mounting accessories designed around the Klutch Welding Fabrication Table system. Its strongest point is the mix of V-blocks, spacers, stop components, threaded adapters, and M10 bolts in one compact kit. The main limitation is compatibility, because you should confirm your table’s hole system before buying it for a non-Klutch fixture table.
Quick Verdict
Rating: Recommended with caveats
Best For: Klutch welding-table owners who want more locating and workholding options for tube and plate fabrication.
Bottom Line: The 32-piece assortment gives you useful options for positioning round and square stock without buying each type of fixture separately. It makes the most sense on the Klutch table system it was designed for, so owners of other fixture tables should check hole size and mounting requirements first.
| Specification | Detail |
|---|---|
| Brand | Klutch |
| Item | 102883 |
| Product type | Welding table workhold accessory base kit |
| Piece count | 32 pieces |
| Dimensions | 4 x 2.75 x 5.5 in. |
| Weight | 3.2 lb |
| Material | Steel/aluminum |
| Threaded adapters | 4 |
| Stop components | 4 stop bases with top plates |
| V-blocks | 8, for positioning round parts |
| Spacer blocks | 4, for square tube or metal plate setups |
| Mounting bolts | 8 M10 bolts |
| Designed for | Klutch Welding Fabrication Table with Tool Kit, Item #61158, sold separately |
| Best use | Locating and holding round tube, square tube, and plate during fabrication setup |
What Is the Klutch Welding Table Workhold Accessory Base Kit?
The Klutch Workhold Accessory Base Kit, Item #102883, is an add-on fixture kit for welding and fabrication tables. Rather than being a welding table itself, it supplies the small positioning components that help you locate stock before and during clamping.
The kit contains 32 pieces. Its threaded adapters mount under the tabletop so a table hole can accept a threaded connection. Stop bases and top plates help establish a repeatable stopping point, while the eight V-blocks support round stock. Four spacer blocks are intended for square tube or plate, and eight M10 bolts handle mounting duties.
Klutch specifically designs this kit for its Welding Fabrication Table with Tool Kit, Item #61158. That table uses approximately 16mm fixture holes, so compatibility deserves more attention if you want to install the accessories on another brand of welding table.
Before You Buy: Do not choose this kit based only on the appearance of your table holes. It is designed around the Klutch fixture-table system. Check your table’s hole diameter, spacing, underside clearance, and mounting requirements before assuming that every component will fit.
Key Takeaways
- You get a 32-piece accessory assortment for positioning round tube, square tube, and plate.
- Eight V-blocks give you multiple contact points for locating round workpieces.
- Four spacer blocks support square-tube and plate setups.
- Four threaded adapters let you convert suitable tabletop holes into threaded mounting points.
- Eight M10 bolts are included for mounting the workhold components.
- The kit is specifically designed for the Klutch Welding Fabrication Table with Tool Kit, Item #61158.
- At 3.2 lb with compact 4 x 2.75 x 5.5-in. listed dimensions, the kit is easy to keep in a toolbox or near your fabrication table.
Who Should Buy It?
Best For
- Owners of the Klutch Item #61158 welding fabrication table who want extra workholding pieces.
- Fabricators who regularly position both round and square stock.
- Home shops that need several basic locating accessories without moving to a larger fixture-table system.
Skip If
- Your welding table uses a different hole standard and you have not confirmed compatibility.
- You need complete clamps rather than locating blocks, adapters, spacers, and mounting hardware.
- You do not use a fixture-style welding table with suitable mounting holes.
Build Quality and Included Workholding Parts
The kit uses steel and aluminum components and weighs about 3.2 lb. That makes it substantial enough to function as a metal fabrication accessory set while remaining compact enough to store in a drawer or welding cart.
The variety matters more than the raw piece count. A round tube and a flat plate require different locating approaches. Klutch addresses that difference by including eight V-blocks for round parts and four spacer blocks for square tube or plate.
Threaded Adapters
The four threaded adapters mount beneath the tabletop. Their purpose is to turn a suitable table hole into a threaded mounting point, giving you another way to secure fixture components instead of relying only on parts that drop through the table.
Stop Bases and Top Plates
The stop components mount on the tabletop and give the workpiece a defined reference point. This becomes useful when you need to position similar parts repeatedly or prevent stock from shifting while you establish the rest of the setup.
V-Blocks
The eight V-blocks are the most relevant pieces when you work with round tube or similar cylindrical stock. The V shape gives the material two contact surfaces instead of trying to balance a curved part against a flat stop.
Spacer Blocks and M10 Bolts
Four spacer blocks support setups involving square tube or metal plate. The kit also includes eight M10 bolts for mounting. Together, these parts give you several ways to build a simple fixture around the shape of the workpiece.
Why the 32-Piece Layout Is Useful
The biggest reason to consider this kit is fixture flexibility. You are not limited to one shape of stock. You can combine stops, spacers, V-blocks, threaded adapters, and bolts according to what you are trying to locate.
The second benefit is repeatability. Once a stop or spacer establishes a reference position, you can place another similar workpiece against the same setup. That can reduce the amount of measuring and repositioning needed between repeated fabrication steps.
It is also an add-on rather than a complete table. That matters if you already own the compatible Klutch welding table and simply want more fixture components instead of buying another fabrication surface.
Fit and Compatibility
Klutch lists the base kit for use with its Welding Fabrication Table with Tool Kit, Item #61158. That table uses CNC-machined holes measuring about 0.63 inch, or roughly 16mm, spaced 2 inches apart.
This does not automatically mean the accessory kit will fit every table advertised as having 5/8-inch or 16mm holes. Hole diameter is only one part of compatibility. Threading, component geometry, tabletop thickness, underside access, and spacing can also affect whether a fixture works correctly.
Pro Tip: Before ordering the kit for a different table, measure an actual fixture hole and check the clearance underneath it. Confirming those two details can prevent buying accessories that look compatible but cannot mount correctly.
Setup Tips for Better Results
Start by deciding which surface or edge will act as your reference. Position the appropriate stop, spacer, or V-block first, then bring the workpiece against it before adding the rest of the fixture components.
For round tube, use the V-blocks where they can support the curved surface without allowing the tube to roll away from your intended position. For square tubing or plate, spacers and stops can establish a flat reference edge.
Check the alignment before tightening everything fully. Small fixture changes are easier before the bolts and clamps are loaded. Once the part is positioned correctly, secure the setup according to the table and accessory instructions.
Also remember that this is primarily a workhold accessory base kit. Some fabrication jobs still require dedicated clamps to provide the holding pressure needed to keep the workpiece firmly against the locating components.
How It Performs in Real Use
Round-Tube Fabrication
For round stock, the eight V-blocks give you several possible support locations. Their job is to keep curved material from behaving like it would against a simple flat stop. This can make tube positioning more controlled before tack welding or clamping.
Square Tube and Plate Work
The spacer blocks and stop components are better suited to flat-sided workpieces. You can use them to establish edges, offsets, and stopping points when arranging square tube or plate on the table.
Repeat Fabrication Setups
If you make more than one similar part, a fixed stop can serve as a reference for each workpiece. You still need to verify critical dimensions, but a repeatable fixture layout can reduce unnecessary repositioning between parts.
Small-Shop Storage
The listed 3.2-lb weight and compact dimensions make the set easier to keep near your table than a large collection of bulky clamps. The tradeoff is that 32 separate components are easier to misplace, so a dedicated drawer, bin, or organizer is useful.
Compatibility and Welding Safety
Workholding accessories help position material, but they do not replace safe welding procedures. Make sure every component is properly seated and tightened before you begin welding, and keep hands clear when tightening fixtures around heavy or awkward stock.
Do not assume a loosely fitted adapter is acceptable just because it enters the hole. Incorrectly sized fixture hardware can shift under load. Use the kit only with a table setup that provides proper mechanical fit, and follow the welding table’s operating instructions.
You should also inspect the components periodically for damage, distortion, worn threads, or weld spatter that interferes with seating. Do not force a damaged threaded component into place.
Pros and Cons
Pros
- 32-piece assortment covers several common workholding tasks.
- Eight V-blocks are specifically useful for round parts.
- Spacer blocks support square tube and plate setups.
- Threaded adapters add another way to use suitable table holes.
- Compact 3.2-lb kit is easier to store than large standalone fixtures.
Cons
- Designed around a specific Klutch table system, so cross-brand compatibility is not guaranteed.
- The kit does not replace dedicated clamps when the workpiece needs active clamping pressure.
- Multiple small parts require organized storage to keep the complete set together.
What Buyers Say About the Klutch Workhold Kit
Buyer feedback on current retailer listings is generally positive about the kit’s fit with the intended Klutch welding table, ease of use, and usefulness as an additional set of workholding pieces. Those comments make sense for buyers who already work inside the Klutch table ecosystem.
The more important lesson is to separate feedback about the accessory kit from feedback about the welding table itself. This product is the 32-piece accessory kit, not a 24-inch-wide welding table, and it should be evaluated as a collection of locating and mounting components.
Is It Worth the Price?
The Klutch Workhold Accessory Base Kit makes the most sense as a lower-cost expansion for a compatible table rather than as the foundation of an entirely new fixture system. You get several types of workholding components in one package, which can be more convenient than sourcing individual V-blocks, spacers, stops, adapters, and bolts.
You get the most value if you already own the Klutch Item #61158 table and frequently work with a mix of round tube, square tube, and plate. The value is weaker if you need to adapt the kit to an unrelated table or still need to buy several full clamps to complete your setup.
How It Compares to Alternatives
If your main need is stronger active clamping rather than extra locating components, the Klutch 4-Pc. Welding Table Clamp Kit, Item #102884, is worth comparing. It is a clamp-focused accessory designed for 16mm welding-table holes and is intended to work with this Workhold Accessory Base Kit. The two products serve different roles rather than being exact substitutes.
You can also stay with the 24-piece tool kit supplied with the compatible Klutch Item #61158 table if those included fixtures already cover your work. At the other end of the market, systems such as Fireball Tool’s fixture-table platforms use their own tooling standards and are better viewed as separate fixture ecosystems, not direct drop-in replacements for this Klutch kit.
Where to Buy the Klutch Welding Table Accessory Kit
The kit can be found through online sellers, including Amazon, and through welding-tool retailers that carry Klutch equipment. Because seller pricing, stock, and marketplace listings can change, check the current listing details before ordering.
Pay particular attention to the product identity. Look for the Klutch Welding Table Workhold Accessory Base Kit, 32-Pc. and confirm that you are buying the accessory kit rather than a welding table, clamp-only set, or different fixture assortment.
Frequently Asked Questions
What comes in the Klutch 32-piece Workhold Accessory Base Kit?
The kit includes four threaded adapters, stop bases with top plates, eight V-blocks, four spacer blocks, and eight M10 mounting bolts. The different pieces let you create workholding setups for round tube, square tube, and plate.
Which Klutch welding table is this kit designed for?
Klutch lists the kit for its Welding Fabrication Table with Tool Kit, Item #61158. That table has fixture holes measuring about 0.63 inch, or roughly 16mm.
Will it work with other 5/8-inch or 16mm welding tables?
Possibly, but hole diameter alone does not prove full compatibility. Check the actual hole dimensions, tabletop thickness, underside access, threading requirements, and fixture geometry before using the kit with another table.
What are the V-blocks used for?
The eight V-blocks are designed to hold or locate round parts. Their angled contact surfaces make them more suitable for cylindrical stock than a simple flat spacer.
Does this kit replace welding-table clamps?
No. The kit provides locating, spacing, adapting, and mounting components, but some projects still need clamps to apply holding pressure. Klutch also sells a separate clamp kit for compatible welding-table setups.
How should I clean and maintain the components?
Keep the contact and threaded surfaces free of debris and weld spatter that could prevent proper seating. Inspect bolts, adapters, and locating pieces for worn threads, distortion, or other damage before building a fixture around them.
Who should skip the Klutch Workhold Accessory Base Kit?
Skip it if your table uses an incompatible fixture system or if your main need is a set of complete clamps rather than locating accessories. It is also unnecessary if the fixtures already supplied with your Klutch table cover every setup you regularly use.
The Bottom Line
The Klutch Welding Table Workhold Accessory Base Kit is a practical expansion for compatible Klutch table owners who need more options for positioning round tube, square tube, and plate. Its 32-piece mix of V-blocks, spacers, stops, adapters, and mounting bolts is the main strength, while limited guaranteed compatibility outside the intended Klutch system is the key reason to check your table carefully before buying.
If you already use the Klutch Item #61158 fabrication table and regularly build varied fixtures, it is easy to recommend with that compatibility caveat. If you use a different hole system or primarily need clamps, compare your other options first.
