RIVERWELD acetylene cutting tips are replacement oxy-acetylene cutting tips that the listing says fit Victor oxy-fuel cutting torches. The listing gives a cutting thickness of roughly 20 mm to 40 mm (about 3/4 in to 1-1/2 in), a 1.5 mm cutting orifice and a copper body. They are worth considering if you own a Victor-style cutting attachment and want spare tips for mid-thickness steel. Skip them if your torch is a different brand or series, or if you cut thin sheet or thick plate regularly.
RIVERWELD cutting tips at a glance
| Item | Per the listing |
|---|---|
| Type | Oxy-acetylene cutting tips (replacement) |
| Listed torch fit | Victor oxy-fuel cutting torches |
| Listed cutting range | 20 mm to 40 mm thick steel |
| Listed orifice data | 1.5 mm cutting orifice and a 0.8 preheat value (units not explained) |
| Material | Copper |
| Weight | About 4.2 oz (as listed) |
| Fuel | Acetylene with oxygen |
Treat the table as the seller’s data. Compare it with the cutting chart for your own torch before use.
Check current price on Amazon →
What it is and who it suits
A cutting tip has a ring of small preheat holes around a center orifice that delivers the cutting oxygen jet. The flame heats the steel to a glowing red, then you press the cutting lever to blow the molten metal away. Tips wear, clog or get damaged by backfires, so spares are normal.
This type suits farm and workshop users who cut mid-thickness mild steel, such as brackets, plate and scrap. It does not suit precision work or stainless and aluminum, which cannot be cut with a simple oxy-fuel flame in the same way.
How to check it fits your torch
- Identify your torch. Victor makes several cutting attachments and the tips are not all the same. Find the model on the torch or in its manual.
- Compare the tip seat and nut style with your current tip. Cutting tips usually seat on a metal-to-metal taper and use a nut.
- Compare the tip series and size. A mid-range size is wrong for thin sheet or thick plate.
- Check that your fuel is acetylene. Propane and MAPP cutting tips are different.
- Verify your regulators and hoses are rated for the pressures in the torch manual.
Pros and limitations
Pros
- A spare tip keeps you cutting if your current one is clogged or damaged.
- Copper is a normal tip material and carries heat away from the nozzle.
- Suited to a defined thickness range, according to the listing.
Limitations
- Fit depends on matching your torch and series. A near fit can leak.
- Third-party tips vary in orifice finish; poor finish gives ragged cuts.
- Not for cutting stainless or aluminum in the usual way.
- Quality of cut still depends on pressure settings, travel speed and clean steel.
Using cutting tips safely
- Inspect the tip and seat. Do not use a tip with a damaged seat or bent end.
- Check for leaks with soapy water on all connections, not with a flame.
- Set the regulators from your torch and tip chart. Never run acetylene above 15 psi (1 bar).
- Use flashback arrestors and check valves, and keep oil and grease away from oxygen fittings.
- Light acetylene first, then add oxygen, following your manual. Adjust to a neutral flame, and test with the cutting oxygen lever.
- Clean orifices with proper tip cleaners and wear the right shade goggles, leather gloves and flame-resistant clothing.
Never cut containers that held fuel or chemicals, and be mindful of sparks and slag landing on flammable materials. Cutting galvanized or coated steel creates fumes that need ventilation.
View current listing on Amazon →
Alternatives and related guides
- Single-tip listing: RIVERWELD acetylene cutting tip review.
- Compare Rongda cutting torch tips and JZWELD cutting tips.
- Keep tips clean with the cutting torch tip cleaner review.
- Need a complete setup? See the oxygen-acetylene cutting torch kit review.
Frequently Asked Questions
Will RIVERWELD cutting tips fit my Victor torch?
The listing says they fit Victor oxy-fuel cutting torches, but Victor has multiple torch series. Check your model, the tip seat and nut style, and the tip series number before ordering.
What thickness can these cutting tips handle?
The listing quotes roughly 20 mm to 40 mm steel. Actual performance depends on your torch, pressures, travel speed and steel condition, so use your torch manufacturer chart for settings.
Can I use them with propane or MAPP?
No. These are described for acetylene. Propane and MAPP need different tips designed for their flame characteristics, and mixing fuels can cause poor cuts or unsafe operation.
How do I clean a clogged cutting tip?
Use correctly sized tip cleaners to clear each preheat hole and the center orifice, then blow out debris. Avoid drills or wires that enlarge holes. Replace tips that stay ragged after cleaning.
Conclusion
These RIVERWELD tips are spare cutting tips for Victor-style torches working with mid-thickness mild steel. Confirm your torch model and tip series first, and cut with proper safety gear and leak-tested equipment.