As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The flexible 25ft TIG torch power cable is a silicone-rubber cable with a reinforced nylon braid, sold under the HOgardenME name per the Amazon listing. It uses a 3/8 x 24 right-hand fitting and is described as suiting CK9 and CK17 style torches. It is worth considering if you want a soft, flexible cable for an air-cooled torch; skip it if your torch uses a different fitting or is not in the CK9/CK17 family.
This review is based on the listing, not hands-on testing. Buyers of replacement cables most often run into fit problems, so the checklist below comes first.
Flexible 25ft TIG torch power cable at a glance
| Item | Detail |
|---|---|
| Type | Air-cooled TIG torch power cable |
| Length (per listing) | 25 ft |
| Construction (per listing) | Silicone rubber with reinforced nylon braid |
| Connection (per listing) | 3/8 x 24 RH |
| Listed torch fit | CK9 and CK17 style torches |
| Seller / brand (per listing) | HOgardenME |
| Model number mentioned | 57Y031RSF |
The listing text available does not give an amp rating. Check the listing and your torch manual, and never exceed the lower of the cable and torch ratings.
Check the current price on Amazon →
What it is and who it suits
A TIG power cable carries current and shielding gas from the machine to the torch head. Silicone rubber jackets tend to stay softer than PVC and rubber at low temperatures, and a nylon braid adds abrasion resistance. That combination aims at easy handling and a longer life when the cable is dragged around a shop.
- Welders who find a stiff cable fights them in tight spaces.
- Owners of CK9 or CK17 style torches replacing a damaged or short cable.
- Shops that want a 25 ft run to reach larger projects.
How to check it fits
- Torch family. The listing mentions CK9 and CK17 compatibility. Other torch brands and clones use different heads and fittings, so confirm yours.
- Thread. The 3/8 x 24 RH thread has to match the connection on your torch and your machine adapter. Compare it to the cable you are replacing.
- Machine end. Check that the gas and power fitting matches your TIG machine, such as a Dinse-style or other connector.
- Current rating. The listing does not state a clear amp rating. Compare with the torch rating and ask the seller before running high current.
- Length. A 25 ft cable is heavier and has more resistance than a 12.5 ft one, so choose by how much reach you need.
Pros and limitations
Pros
- Silicone jacket plus nylon braid, per the listing, for flexibility and abrasion resistance.
- 25 ft of reach for large fabrication.
- Light and supple compared with stiffer cable jackets.
Limitations
- Fit is limited to torches that match the listed family and 3/8 x 24 fitting.
- Amp rating is not clearly stated, which matters for continuous work.
- Some buyers report stiffness in cold weather or breakage under heavy use, so inspect the cable when it arrives.
- Warranty details should be confirmed with the seller.
Check the current price on Amazon →
Installation and care tips
- Turn off the machine and gas before swapping cables.
- Hand-tighten, then snug with the correct wrench. Loose connections overheat.
- Leak test with soapy water at the torch and machine ends.
- Do not coil tightly or run over the cable. Avoid kinks that restrict gas.
- Replace the cable if the braid frays, the jacket cracks or the fittings discolor.
Alternatives and related guides
- SÜA 25 ft TIG torch power cable review: a rubber cable listed for WP-9, 17 and 26 torches
- Riverweld TIG welding cable review: another cable and connector option
- Shimeyao TIG welding torch review: a full torch assembly if you want to replace everything
- Hynade TIG welding torch review: another complete torch option
Frequently Asked Questions
Which torches does this cable fit?
The listing says CK9 and CK17 style torches with a 3/8 x 24 RH connection. Other brands may use different heads or fittings, so compare your current cable and torch before ordering and ask the seller if your model is not named.
What is the amp rating of this cable?
The listing text available here does not give a clear rating. Check the current listing and your torch manual, and keep the current at or below the lower of the cable and torch ratings. Air-cooled setups also heat up on long, high-current welds.
Why choose a silicone TIG cable?
Silicone jackets stay softer, especially in the cold, so the cable is easier to route around a workpiece. They also tolerate heat and spatter fairly well. Check the jacket after use, since any cable can wear or cut.
Is a 25 ft cable too long?
It depends on your work. Long cables reach large projects but are heavier and add some resistance. For bench work, a 12.5 ft cable is often easier to manage. Choose the length you need, not the longest available.
Bottom line
This flexible 25ft TIG power cable is a soft-jacketed replacement for CK9/CK17 style air-cooled torches. Confirm the 3/8 x 24 fitting and the rating with the seller before relying on it.
Check the current price on Amazon →
