As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The HYNADE WP-17V TIG welding torch is an air-cooled torch that the listing rates at 150 amps, with a 13 ft cable and a 10-25 mm2 quick connector. Duty cycle figures in the listing are 35% at 140 A DC and 35% at 125 A AC. It suits hobbyists and small shops welding thin to medium material who want a replacement torch with accessories included. Skip it if you regularly weld near the top of its rating for long runs, or your machine uses a different connector.
HYNADE TIG welding torch at a glance
| Item | What the listing says |
|---|---|
| Model | WP-17V, air-cooled TIG torch |
| Rated current | 150 A |
| Duty cycle | 35% at 140 A DC; 35% at 125 A AC |
| Cable length | 13 ft (about 4 m) |
| Connector | Quick connector for 10-25 mm2 cable |
| Construction | Multi-strand copper cable, nylon over-braided rubber hose |
| Accessories | Ceramic cups and collets are mentioned; check the listing for the full list |
These details come from the seller’s Amazon listing. Confirm the current specs and kit contents on the listing page.
Check Current Price on Amazon →
What it is and who it suits
This is a WP-17 style torch with separate gas and power lines. The “V” in WP-17V commonly indicates a gas valve built into the handle, which lets you shut off gas at the torch. Check the listing to confirm that detail for this version.
It tends to suit:
- Hobbyists and garage welders using a typical 150 A class inverter on thin to medium steel, stainless or aluminum.
- Owners replacing a worn or damaged torch who want accessories included.
- Anyone who values a lightweight, ribbed handle over a more expensive branded torch.
How to check it fits your setup
- Connector: Confirm your welder uses a 10-25 style Dinse connector for the power cable. Machines with a 35-50 socket need an adapter.
- Gas connection: Check the gas fitting size and thread to match your machine’s gas outlet.
- Current and duty cycle: A 35% duty cycle at about 140 A means roughly 3.5 minutes of welding in a 10 minute period at that current. Weld below the rating for longer runs.
- AC and DC use: The listing mentions both. Your welding machine decides whether you can run AC for aluminum.
- Control: A valve-type torch does not necessarily have a trigger. If your machine expects a foot pedal or a trigger switch, check how the torch connects.
- Consumable pattern: WP-17 style consumables are widely sold, which helps with replacements.
Pros and limitations
Pros
- Multi-strand copper conductor and over-braided hose is the right construction for flexibility and abrasion resistance.
- Lightweight with a ribbed handle for grip.
- Common consumable pattern with easy replacements.
Limitations
- Air cooling limits long runs at higher current.
- Third-party torches vary in fit and finish, so inspect the connectors on arrival.
- The listing figures are the seller’s, not an independent test.
- A torch alone does not weld aluminum. You still need an AC machine and the right filler.
Setup and safety tips
- Fit the cup, collet, collet body and back cap in the right order, and tighten the back cap firmly.
- Check hose clamps and fittings for gas leaks using soapy water.
- Let the torch cool between long welds. If the handle becomes uncomfortably hot, reduce current or take a break.
- Do not weld with a cracked cup or a kinked cable.
- Use a TIG-appropriate lens shade, gloves and flame-resistant clothing, and weld in ventilated areas.
Alternatives and related guides
- For a very similar torch pattern, see the WP-17V air-cooled lift TIG torch review.
- Other options include the Shimeyao TIG welding torch and the Femerol TIG welding gun.
- For power cable, see the flexible 25 ft TIG torch power cable.
- For torch end hardware, check the MTSOONING 41V35 back caps.
Frequently Asked Questions
What does a 35% duty cycle mean on a TIG torch?
Duty cycle is the share of a 10 minute period you can weld at a stated current without overheating. At 35%, you can weld about 3.5 minutes at that current and then rest. Welding at lower current allows longer runs.
Can this torch be used for both AC and DC welding?
The listing gives ratings for both AC and DC. The torch itself does not decide the mode; your TIG machine does. To weld aluminum you need an AC-capable machine, argon shielding and the right filler.
What does the V in WP-17V mean?
On many WP-17 style torches the V indicates a gas valve in the handle, which lets you stop gas flow at the torch. Confirm this on the listing for this exact version before relying on it.
Will it fit my TIG welder?
It uses a quick connector for 10-25 mm2 cable plus a separate gas hose. Check that your machine has a matching Dinse-style socket and gas outlet. If your machine uses a larger socket, you may need an adapter.
Verdict
The HYNADE WP-17V is a reasonable air-cooled replacement torch for hobby and light fabrication use, if the connectors match your welder and you stay inside its duty cycle. Check the fit details first, then inspect the torch when it arrives.
Check Current Price and Availability →
