🔧 Practical welding guides, tested in a real garage
Welding Gloves & Apparel Reviews

Tillman 48XL Welding Gloves Review: Goatskin MIG Glove

tillman 48xl welding gloves

The Tillman 48XL is the extra-large version of Tillman’s model 48 MIG glove: a 13-inch glove with a goatskin palm, split cowhide back, fleece lining and a 3-1/2 inch cuff. This Tillman 48XL welding gloves review is based on the Amazon listing and retailer descriptions. It is worth considering if you want a MIG glove with more feel than all-cowhide, and you need XL sizing.

Tillman 48XL at a Glance

Item Per the listing
Model and size Tillman 48, size XL
Length and cuff 13 inches overall, 3-1/2 inch cuff
Palm Top grain goatskin
Back of hand Split cowhide
Lining and stitching Fleece lining; Kevlar thread per the listing
Intended process MIG; listing also mentions TIG

Check Current Price on Amazon →

What They Are and Who They Suit

This is a combination design. The goatskin palm is softer and thinner than cowhide, which helps with control of a MIG gun and small hand-held parts. The split cowhide back is tougher and cheaper, so it takes the spatter. The fleece lining adds comfort and some insulation.

They suit MIG welders who want comfort and a snug fit without going to stiff cowhide, and welders with larger hands who need an XL. They are less suitable for heavy stick welding or high-amp work, where thick insulated gloves handle the heat better.

How to Check They Fit Your Setup

  1. Confirm the size. XL needs to match your hand, not just your glove size from other brands. Measure around the palm and compare it with the chart.
  2. Match the process. MIG is the intended use. For TIG, consider thinner gloves for dexterity. For stick, consider heavier insulated gloves.
  3. Check the cuff. A 3-1/2 inch cuff covers the wrist gap, but it may not cover sleeves. Wear a jacket for overhead work.
  4. Look at the lining. Fleece is comfortable, though it may feel warm in summer.
  5. Confirm stitching. Heat-resistant thread helps prevent seams from opening.

Pros and Limitations

Pros

  • Goatskin palm for dexterity with split cowhide where abrasion and spatter hit most.
  • Fleece lining for comfort.
  • Full-length cuff covers the wrist gap.

Limitations

  • Less feel than dedicated TIG gloves and less heat resistance than heavy stick gloves.
  • Fleece lining can feel warm in hot shops.
  • Leather stiffens if soaked and dried quickly.

Use and Care Tips

  • Don’t hold hot metal for long. Use pliers or tongs.
  • Replace gloves with thin palms, burn-through or loose stitching.
  • Keep gloves dry. Wet leather conducts heat faster.
  • Store flat, away from direct sunlight and heat sources.

View Latest Price →

Frequently Asked Questions

Is 48XL a model or a size?

The Tillman 48 is the model, a goatskin and cowhide MIG glove, and XL is the size. Tillman sells the 48 in other sizes too, so check that the listing you are viewing is the size you need and compare it against the size chart.

Are the Tillman 48 gloves good for TIG?

They are sold as MIG gloves, and the listing also mentions TIG use. The goatskin palm gives better feel than split cowhide, but dedicated TIG gloves with thinner goatskin or deerskin give the most control for low-amp work.

Do the Tillman 48XL gloves have a warranty?

Check the Amazon listing and Tillman’s own information for current warranty terms. The product page text is the best source, and any warranty claim would apply to defects, not normal wear, burn-through or damage from misuse.

How should I clean fleece-lined welding gloves?

Wipe with a damp cloth, avoid harsh chemicals and let them air dry away from direct heat so the leather stays flexible. Store them flat in a cool, dry place and replace them when the palm gets thin or seams open.

Conclusion

The Tillman 48XL combines a soft goatskin palm with a tougher cowhide back, making it a comfortable MIG glove in XL sizing. Verify size and process fit before ordering.

Check Price on Amazon →

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *