When you first look at an acetylene tank, it’s easy to assume it’s just a solid cylinder of compressed gas like an argon or CO₂ bottle. But any welder who’s spent time cutting steel plate, prepping joints for MIG vs…
One of the first challenges I ran into as a new welder was figuring out the maximum fillet weld size for plate thickness. I once laid down a heavy bead on 1/4″ plate, thinking more filler metal meant a stronger…
When my stick welder refused to strike an arc, I quickly realized how fast a simple job can turn into pure frustration. You’ve got the metal cleaned up, the filler rods ready, and the machine powered on, yet the electrode…
One of the toughest challenges in the shop is bonding aluminum to steel—different metals, different expansion rates, and very different welding requirements. That’s why so many welders turn to JB Weld Aluminum to Steel for repairs when firing up a…
One of the biggest lessons I picked up early in the shop was realizing that a weld can look perfect on the surface yet fail the moment real stress is applied. That’s where understanding how to calculate weld strength becomes…
When I first tackled MIG welding galvanized steel, I quickly realized it wasn’t as straightforward as running a bead on plain carbon steel. The zinc coating burned off under the arc, throwing up clouds of fumes, spatter, and leaving behind…
When I first picked up a no gas MIG welder, I’ll admit—I was a bit overwhelmed. The idea of welding without shielding gas made me wonder if I could still get clean, strong welds on steel, stainless, or even thin…
When you roll an acetylene cylinder into the shop, it’s easy to focus on things like joint prep, arc control, or whether MIG or TIG is the better choice for your stainless welding job. But tucked inside that cylinder is…
When I first had to MIG weld an exhaust pipe, it was a real test of patience—thin tubing, awkward angles, and the constant risk of burning through the metal. Exhaust work isn’t just striking an arc and running a bead;…
More than once I’ve been in the middle of a weld—metal cleaned, joints fitted tight, everything ready to go—only to squeeze the trigger and realize my welder isn’t feeding wire. It’s one of the most frustrating problems any MIG welder…