These Black Stallion cowhide welding gloves are leather gloves for welding, shop work and automotive repair. The listing describes cowhide leather, a cotton lining with foam padding, Kevlar stitching and reinforced patches on the palm, thumb and index finger. They are a good all-round pick for MIG and light stick work, and too bulky for fine TIG work. Black Stallion welding gloves are a popular heavy-duty choice for stick and MIG welders.
The listing details below come from the Amazon page and the Black Stallion range, and the gloves were not hands-on tested for this article. Confirm the size, color and exact model on the listing before you order.
Quick verdict
Best for: Shop users and welders who want an all-round leather glove for welding, grinding, automotive and general fabrication.
Bottom line: A practical protective glove if the listing details match what you need. Exact sizing, certifications and warranty are not confirmed here, so read the listing first.
Black Stallion cowhide welding gloves at a glance
| Spec | Detail |
|---|---|
| Brand | Black Stallion (Revco) |
| Type | Leather welding and work gloves |
| Leather | Cowhide, per the listing |
| Lining | Cotton lining with foam padding, per the listing |
| Stitching | Kevlar thread |
| Reinforcement | Palm, thumb and index finger patches |
| Wrist | RestPatch padding, per the listing |
| Best use | MIG welding, shop work, automotive repair |
| Care | Wipe clean, air dry away from heat |
What the listing says about these gloves
Cowhide is the common welding glove leather. It is tougher and thicker than goatskin or kidskin, so it gives better abrasion and spark protection and less fingertip feel.
Kevlar thread is used because ordinary thread can burn through near sparks and hot metal. Seams are a common failure point on welding gloves, so strong thread matters. The patches on the palm, thumb and index finger add leather where a glove rubs against tools, clamps and workpieces.
Where they fit and where they do not
- MIG welding: a good match, with enough padding for spatter and enough flexibility for the gun.
- Light stick welding: workable. For long stick sessions at high amperage choose a lined elkskin glove such as the Black Stallion 850.
- Grinding, cutting and general shop work: practical, since you can leave them on between tasks.
- TIG welding: not recommended. A thin goatskin glove gives much better control.
Safety note: Check that the glove meets any standard your workplace requires. This article does not state a certification because none was verified.
Buying checklist
- Choose the size by the manufacturer chart on the listing, not by your usual work glove size.
- Confirm the leather, lining and stitching shown on the listing match this description.
- Check the return policy in case the fit is wrong.
- Plan to inspect the palm and seams before each use and replace the gloves when they wear through.
Pros and limitations
Pros
- Cowhide leather suits MIG and general shop work
- Kevlar stitching and reinforced patches
- Padding at the wrist and side of the hand listed
- Works across several tasks without swapping gloves
Limitations
- Not suited to delicate TIG work
- Waterproofing and certifications are not listed
- Leather dries stiff if it gets wet
Related reading: Black Stallion MIG welding gloves | Black Stallion GM1611-WT | How to maintain welding gloves | Types of welding gloves
Frequently Asked Questions
What are Black Stallion cowhide welding gloves best for?
General welding and shop work, especially MIG. They are thicker than TIG gloves and less dexterous.
Are they made from real cowhide?
The listing describes cowhide leather. Black Stallion MIG gloves in the manufacturer catalog use grain cowhide on the palm and split cowhide on the back.
Can I use them for stick welding?
For light stick work yes. For heavy, hot stick welding a lined elkskin glove is usually more comfortable.
How should I clean welding gloves?
Brush off dirt, wipe with a damp cloth, air dry away from heat and avoid soaking the leather.
Do they come with a warranty?
Warranty terms are not confirmed here. Check the Amazon listing or the seller.
Bottom line
Black Stallion cowhide welding gloves are a reasonable all-round leather glove for MIG and shop use. Check the size, listing details and return policy, and pick a thinner glove if precision matters more than protection.
