The Black Stallion GM1611-WT is a cowhide MIG welding glove with a reinforced palm, thumb and index finger, side and wrist padding, and Kevlar stitching. It suits MIG welding, fabrication and general shop work where you want protection and a bit of padding, and it is not the glove to pick for fine TIG work.
This review covers what the manufacturer lists for the GM1611-WT, how it fits different jobs, and what to check on the Amazon listing before you order. The gloves were not hands-on tested for this article.
Quick verdict
Best for: MIG welders and shop users who want a padded, reinforced cowhide glove for everyday welding and fabrication.
Bottom line: A solid protective MIG glove on paper: cowhide, reinforced wear points and Kevlar thread. The trade-off is less fingertip feel than a thin TIG glove, so look elsewhere for precision work.
Black Stallion GM1611-WT specs at a glance
| Spec | Detail |
|---|---|
| Brand | Black Stallion (Revco) |
| Model | GM1611-WT |
| Type | MIG welding glove |
| Palm | Grain cowhide |
| Back | Split cowhide |
| Reinforcement | Patched palm, thumb and index finger |
| Padding | DragPatch side padding and RestPatch wrist padding |
| Stitching | Kevlar thread |
| Sizes | S to 2XL per the manufacturer catalog |
| Care | Spot clean, air dry away from heat; follow the label |
What is the Black Stallion GM1611-WT?
The GM1611-WT is part of the Black Stallion line from Revco. The maker describes it as a cowhide MIG glove with a grain cowhide palm, a split cowhide back and a reinforced palm, thumb and index finger. Patches sit where MIG gloves tend to wear first: the palm, the thumb and the trigger finger.
DragPatch is a padded panel on the side of the hand that is meant to protect when you rest or slide your hand across hot work. RestPatch is the equivalent padding at the wrist. Both are listed features, so confirm them on the exact listing you buy.
How it fits different jobs
- MIG welding: the intended use. Leather and padding handle spatter and radiant heat while you hold the gun.
- Fabrication and shop work: handy for moving hot offcuts, clamping and positioning parts.
- Stick welding: workable for light jobs, but a lined elkskin stick glove such as the Black Stallion 850 is built for more heat.
- TIG welding: not a good match. Use a thin goatskin or kidskin glove such as the Black Stallion 25K instead.
Safety note: Gloves reduce risk but do not remove it. Inspect them before each session, replace them when seams open or leather cracks, and never grab hot metal for long.
What to check before you buy
- Pick your size from the Amazon size chart. A glove that is too tight cramps your hand, and one that is too loose gets in the way of the gun.
- Confirm the color and variant on the listing, since several Black Stallion MIG gloves look alike.
- Read the listing for any certification you need for your workplace. This article does not list one because none was verified.
- Check the return policy, so you can swap sizes if the first pair does not fit.
Pros and limitations
Pros
- Cowhide palm and split cowhide back suit MIG work
- Reinforced palm, thumb and index finger where wear is highest
- Side and wrist padding listed
- Kevlar stitching helps seams resist heat
Limitations
- Thicker than TIG gloves, so less fingertip feel
- Leather stiffens if it gets wet and then dries without care
- Certifications and exact dimensions need checking on the listing
Related reading: Black Stallion MIG Welding Gloves | Revco GM1611 MIG Gloves | How to maintain welding gloves | Types of welding gloves
Frequently Asked Questions
What is the Black Stallion GM1611-WT used for?
It is a MIG welding glove, also used for general shop work, fabrication and handling warm metal.
What materials is the GM1611-WT made from?
Per the manufacturer catalog, it has a grain cowhide palm and a split cowhide back, with Kevlar stitching and patches on the palm, thumb and index finger.
Is the GM1611-WT good for TIG welding?
Not ideal. TIG work needs a thin, soft glove for filler rod control, and the padded cowhide here is thicker.
What sizes does it come in?
The manufacturer lists sizes from small to 2XL. Check the Amazon listing for the sizes currently in stock.
How do I care for them?
Brush off dirt, spot clean with a damp cloth, air dry away from direct heat and store them flat in a dry place.
Bottom line
The GM1611-WT is a sensible MIG glove if you want cowhide, reinforced wear points and padding in one pair. Match the size carefully, treat it as a MIG and shop glove rather than a precision glove, and check the listing for the current details.
