πŸ”§ Practical welding guides, tested in a real garage
MIG & TIG Torch Parts Reviews

#10 Ceramic TIG Welding Cup Review: WP-9/17/18/20/26 Fit

#10 ceramic TIG welding cup 2-pack

This #10 ceramic TIG welding cup is a 2-pack of white ceramic cups that the Amazon listing says fits DB SR WP-9/20/25 and WP-17/18/26 style torches, with 3/32 inch diffusers included. It is worth considering if you want inexpensive spare cups for general TIG welding; skip it if your torch uses a non-standard cup thread or you need the extra shielding of a gas lens setup.

This review is based on the seller’s listing and general TIG practice, not hands-on testing. The compatibility list is broad, so the fit check below is the part to follow closely.

#10 ceramic TIG welding cup at a glance

Item Detail
Type Ceramic (alumina) TIG welding cup, white
Cup size #10 (about 5/8 inch orifice)
Pack (per listing) 2 cups
Weight (per listing) About 1.6 oz
Size (per listing) About 3.5 x 2.6 x 1.2 in
Listed torch fit DB SR WP-9/20/25 and WP-17/18/26
Included (per listing) 3/32 inch diffusers

Cup size numbers count 1/16 inch of orifice diameter, so #10 is about 5/8 inch. Verify listing details and your torch thread before ordering.

Check the current price on Amazon →

What it is and who it suits

The cup surrounds the tungsten and directs argon over the weld pool. Ceramic (alumina) cups are the usual consumable on air-cooled TIG torches. They are cheap, heat resistant and good for general steel and stainless welding. They can chip or crack if dropped or knocked, and they wear with use.

A #10 is a mid-to-large size. It gives wider gas coverage than the #5 to #7 cups often supplied with entry-level torches, but it is less compact for tight corners.

  • Hobbyists who want spare cups on hand.
  • Welders stepping up from a small cup to better coverage on stainless.
  • Shops that go through ceramic cups regularly and prefer packs.

How to check it fits your torch

  1. Torch series. Confirm your torch is a WP-9, 20, 25, 17, 18 or 26 style, or a close clone. Many cups across these series share a thread, but not every cup size and style does.
  2. Collet body type. Standard collet bodies and gas lenses use different cup families. Check whether your cups screw onto a standard body or a gas lens before buying a #10.
  3. Diffuser or gas lens. The listing mentions 3/32 diffusers. Confirm what that means in the photos or Q&A and whether it matches your 3/32 inch collet body.
  4. Tungsten stick-out. A #10 cup lets you use more stick-out than a small cup, but the tungsten must still be centered and not touch the cup.
  5. Ordering the same part. If you replace cups often, note the exact cup number and series from the torch manual.

Pros and limitations

Pros

  • Ceramic withstands heat better than plastic cups and costs less than glass.
  • 2-pack gives you a spare, per the listing.
  • Broad torch compatibility listed, which is handy if you own more than one torch.

Limitations

  • Ceramic can chip or crack from drops or sudden temperature changes.
  • Fit varies, so a “universal” claim should be checked against your own cup thread.
  • Low-cost cups can vary in finish and size, so inspect the rim when they arrive.
  • Not a gas lens replacement. A gas lens body improves flow smoothness and is a separate component.

Check the current price on Amazon →

Care and safety tips

  • Let the cup cool before handling or cleaning. Do not quench a hot cup in water.
  • Brush off spatter and wipe off any dust. Replace the cup if the rim is cracked or the bore is stained and rough.
  • Set argon flow to the torch and cup recommendation; larger cups usually want more flow than small ones.
  • Wear a welding helmet and gloves suitable for TIG. Cup choice does not change arc safety.

Related reviews: Welding Knight #12 ceramic cups review, Furick Fupa #12 TIG cup kit review, #12 ceramic white TIG welding cup review and Furick starter kit with gas lenses and cups.

Frequently Asked Questions

What does #10 mean on a TIG cup?

The number is the orifice diameter in sixteenths of an inch. A #10 cup has an opening of about 10/16 inch, or 5/8 inch. Bigger numbers give wider gas coverage but also need more argon and more room around the weld.

Will these cups fit my TIG torch?

The listing says they fit WP-9, 20 and 25 and WP-17, 18 and 26 style torches. Because cups thread onto either a standard collet body or a gas lens, compare your torch manual and the listing photos before ordering.

Ceramic or glass TIG cups: which is better?

Ceramic is cheaper and tougher against heat, which makes it a good everyday choice. Glass costs more but lets you see the electrode and arc area clearly. Both can break if dropped, so many welders keep spares.

How often should a ceramic cup be replaced?

Replace it when the rim is chipped, cracked, or the inside is heavily coated with spatter or discoloration. Damaged cups disrupt gas flow, which can cause porosity and contaminate the tungsten and weld.

Bottom line

This #10 ceramic TIG cup pack is a reasonable, low-cost way to stock spare cups for common air-cooled torches. The main risk is thread and style mismatch, so confirm your torch series and collet body type before buying.

Check the current price on Amazon →

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *