🔧 Practical welding guides, tested in a real garage
MIG & TIG Torch Parts Reviews

Furick Cup BBWSG-16 Review: #16 Glass TIG Cup Specs

Furick Cup BBWSG-16 glass TIG cup - product photo

The Furick Cup BBWSG-16 is a large #16 glass TIG cup built around a gas lens style diffuser, designed for long stick-out and wide argon coverage on difficult joints. Retailer specs describe borosilicate glass, 3/32 inch tungsten, about 180 amps and roughly 30-40 CFH of argon. It is worth considering if you weld stainless or titanium where wide shielding helps; skip it if you only need a basic cup for everyday steel.

This review is based on the Amazon listing and public retailer specs and was not hands-on tested. The big catch is torch fit: this cup usually needs the right adapter or mounting parts for your torch.

Furick Cup BBWSG-16 at a glance

Item Detail
Type Large glass TIG cup with diffuser
Cup size #16 (about 1 inch orifice)
Material (per retailer specs) Borosilicate glass
Recommended tungsten 3/32 inch (2.4 mm)
Current (per retailer specs) About 180A constant amperage, DC
Argon flow (per retailer specs) Roughly 30-40 CFH
Torch fit Depends on adapter or mount kit for your torch model

Retailer specs do not confirm exactly what is in the kit, so check the Amazon listing for what is actually included. Verify all specs on the current listing.

Check price on Amazon

What it is and who it suits

A #16 cup has an orifice about 1 inch across (each cup number is 1/16 inch of opening diameter). That is much larger than the #5 to #8 cups most TIG torches ship with. The wider gas column helps shield the weld and the hot tungsten and filler on joints where you need extra stick-out.

  • Welders working on stainless steel who want to limit discoloration.
  • People welding titanium or other reactive metals where trailing shielding matters.
  • Welders with tight corners or long reach who want a big gas envelope.

It is less useful for quick tack work on thin steel, where a standard gas lens and a smaller cup are lighter and easier to see around.

How to check it fits your TIG torch

Fit is the most important question for a cup this size. Do not assume it drops onto any torch.

  1. Torch model. Retailers say Furick cups need a specific adapter or mounting kit to fit common torch families. A different kit is listed for WP-17/18/26 style torches than for WP-9/20. Confirm which one applies to you.
  2. What is in the box. The kit appears to include one cup and a spare diffuser. Torch mount parts may be sold separately.
  3. Tungsten size. The recommended electrode is 3/32 inch. Check that your collet and collet body match what you plan to run.
  4. Gas lens compatibility. The listing mentions using this cup with BBW style diffusers. Confirm the diffuser thread matches your setup.

If you cannot match the torch to the kit from the listing, ask the seller before ordering.

Pros and limitations

Pros

  • Large shielding envelope for stainless, titanium and long-reach joints.
  • Glass lets you see the electrode and arc area clearly, which many TIG welders like.
  • Spare diffuser included, per retailer specs.

Limitations

  • Glass can crack from impact or heat shock, so handle it with care and keep spares.
  • It uses a lot of argon. Expect flow in the 30-40 CFH range called for in the specs, which burns gas quickly.
  • Fit depends on adapters, so it is not plug and play on every torch.
  • The sizing chart lists DC use. Check before using it on AC aluminum.

Check price on Amazon

Setup and care tips

  • Start with the flow rate in the specs, then adjust for drafts and your joint. Verify with a flow meter rather than guessing.
  • Do not drop a hot cup into water. Glass can fail from thermal shock.
  • Keep the diffuser and threads clean so gas flow stays even.
  • Check for chips on the cup rim before each session; a chipped glass cup can crack.
  • Wear a proper welding helmet and gloves. A bigger cup does not change arc safety.

Frequently Asked Questions

What size is the Furick Cup BBWSG-16?

It is a #16 cup. Cup numbers count 1/16 inch of orifice diameter, so a #16 is roughly 1 inch across. That is far larger than the small cups many TIG torches come with, and it needs a compatible adapter or mount kit.

What tungsten and amperage does it suit?

Retailer specs recommend 3/32 inch tungsten and about 180 amps on constant current, with more possible on pulse. The sizing chart lists DC. Always confirm limits on the current listing and match tungsten to your amperage and process.

How much argon does it use?

Specs list roughly 30-40 CFH of argon, which is well above what small standard cups typically need. Use a reliable flow meter and expect to go through argon cylinders faster than with a standard setup.

Will it fit my TIG torch?

Maybe, but only with the correct adapter or mounting kit. Retailers list different kits for different torch families, such as WP-9/20 versus WP-17/18/26. Check the listing and ask the seller before buying if the torch model is not named.

Bottom line

The Furick Cup BBWSG-16 is a specialist glass cup for wide argon coverage, best for stainless and reactive metals. Confirm torch fit and budget for the higher gas use before you order.

Check price on Amazon

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *