🔧 Practical welding guides, tested in a real garage
Welding Helmet & Lens Reviews

TIG Gas Lens 995795 Review: Jumbo Collet Body Fit Guide

tig gas lens review

The TIG gas lens 995795 listing is a pack of large-diameter (jumbo) gas lens collet bodies, a part number that matches a Miller Weldcraft 1/8 in gas lens collet body for WP-17, WP-18 and WP-26 style torches. It is worth considering if you want smoother shielding gas flow and a longer tungsten stick-out for better visibility in tight joints. Skip it if your torch is a different series or you need a different tungsten size.

This page is based on Miller’s part listing and the Amazon listing, not hands-on testing. The Amazon pack may be a compatible part rather than genuine Miller, so confirm the seller details.

TIG gas lens 995795 specs at a glance

Item Detail
Part number 995795 (matches Miller Weldcraft 1/8 in large-diameter gas lens collet body)
Pack (per listing) Pack of five
Material (per listing) Brass and copper
Torch fit WP-17, WP-17V, WP-18, WP-18V, WP-26 and WP-26V per Miller; listing says SR WP-17, 18, 26
Tungsten size 1/8 in (3.2 mm) per Miller, verify on the listing
Also needs Matching collet, back cap and a large-diameter cup, sold separately

Check current price on Amazon →

What a jumbo gas lens does and who it suits

A gas lens collet body contains a stack of fine screens that straighten shielding gas into a calm, laminar stream. Compared with a standard collet body, this lets you extend the tungsten farther from the cup, which improves visibility and access on fillets and inside corners.

The “jumbo” or large-diameter version is made to accept a bigger cup, giving a wider gas shield. Wider coverage helps on materials that need more protection such as stainless and titanium, and it can also help with aluminum when you need long arc reach. It is not a magic fix for dirty metal or wrong gas flow.

  • Suits: TIG welders on 17, 18 or 26 series torches who want better gas coverage or more stick-out.
  • Not needed for: simple flat welds where a standard collet body and cup already give good results.

How to check it fits your torch

  1. Identify your torch series. WP-17, WP-18 and WP-26 are the families named in the listing and Miller’s page. Other torches use different threads.
  2. Match the tungsten size. The 995795 is listed as a 1/8 in body, so you need 1/8 in collets and tungsten. Other diameters need a different body.
  3. Check that your cups are large-diameter gas lens cups. Standard cups may not thread onto this body.
  4. Confirm the pack count and whether the seller states it is a genuine Weldcraft or a compatible part.

If you only want a smaller footprint, see the Riverweld stubby collets review for the stubby alternative, and the Startechweld 995795 gas lens review for another listing of the same part number.

Check current price on Amazon →

Pros and limitations

Pros

  • Large gas lens bodies give a wider, steadier gas stream.
  • Pack of five covers spares, since these parts wear and can get damaged.
  • Works with the common 17, 18 and 26 torch families.

Limitations

  • Needs the correct collet, back cap and large cup to complete the setup.
  • A larger cup can block access in very tight spots.
  • Fit and quality vary between sellers of generic parts. Check threads before use.
  • Gas flow still needs proper tuning. Too much flow can cause turbulence even with a gas lens.

Setup and care tips

Thread the body in by hand until snug, then add the collet, cap and cup. Do not overtighten brass threads. Use argon for TIG and start with a modest flow, checking the manufacturer’s guidance for your cup size.

Inspect the screens for blockage and the O-rings for wear. Replace the body if screens are damaged or the threads are stripped. Grind tungsten lengthwise, and keep it clean so contamination does not clog the lens.

Frequently Asked Questions

What torches does the 995795 gas lens fit?

Miller lists the 995795 collet body for WP-17, WP-17V, WP-18, WP-18V, WP-26 and WP-26V series torches. The Amazon listing mentions SR WP-17, 18 and 26. Confirm your torch series, because other torches use different threads.

What size tungsten does the 995795 use?

Miller names the 995795 as a 1/8 inch (3.2 mm) collet body, so it pairs with 1/8 inch collets and tungsten. If you use 3/32 or 1/16 inch tungsten you need a gas lens body sized for that diameter.

Can I use a gas lens for aluminum welding?

Yes, gas lens setups are commonly used for aluminum TIG with argon, and the calm gas stream can help. Proper cleaning, tungsten prep and amperage matter more. Make sure your machine and technique suit AC aluminum welding.

Do I need a special cup with a jumbo gas lens?

Yes. A large-diameter gas lens body uses gas lens cups sized for it, and standard cups may not fit. Check cup threads and order the cup size you want, such as a number 8 to 12, alongside the body.

Conclusion

The 995795 gas lens body is a fit-specific upgrade for 17, 18 and 26 series TIG torches that gives smoother gas flow and more stick-out. Confirm your torch, tungsten size and cup compatibility before you order the pack.

Check current price on Amazon →

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *