As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The Hobart 770095 oxy-acetylene goggles are flexible green goggles with a #5 shade lens and a flip-up front, made for gas welding, brazing and similar torch work. They are worth considering if you run an oxy-acetylene setup and want an affordable pair with replaceable lenses. Skip them if you weld with electricity (stick, MIG or TIG), because shade 5 is far too light for an arc.
This review draws on Hobart’s product page and the Amazon listing, not hands-on testing. Hobart’s page does not list a safety standard, so check the markings on the pair you receive.
Hobart 770095 goggles at a glance
| Item | Detail |
|---|---|
| Product | Hobart 770095 oxy-acetylene goggles with flip front |
| Lens size (per Hobart) | 2 x 4.25 in |
| Shade (per Hobart) | #5 |
| Frame (per Hobart) | Flexible green goggle frame |
| Strap (per Hobart) | Adjustable elastic headband |
| Replaceable parts (per Hobart) | Lens and cover lens |
| Not for | Arc welding (stick, MIG, TIG) or plasma cutting |
Check current price on Amazon →
What the Hobart 770095 goggles are and who they suit
Gas welding and cutting give off intense visible and infrared light, but far less ultraviolet than an electric arc. That is why goggles with a moderate tint are used for them. Shade 5 sits in the range commonly used for light oxy-fuel welding and brazing, while heavier cutting or larger tips may call for different shades, so check a shade chart.
The flip-up front lets you raise the dark lens for setup and chipping and drop it for work. The 2 x 4.25 inch lens size is a common standard, so replacement lenses are easy to find, but check dimensions.
- Suits: oxy-acetylene welding, brazing, soldering with bright flames and light cutting.
- Not for: arc welding, plasma cutting or laser work. Use a proper helmet for those.
How to check that they fit and match your torch work
- Match shade to the job. Torch size and metal thickness change the best shade. If the flame is painful to look at, go darker.
- Check fit. The flexible frame is made to seal around the face, and the strap adjusts. Try them with your head size and a respirator if you wear one.
- Check eyewear. Hobart does not state they fit over glasses. Goggles often can, but test them with your own frames.
- Check spare lenses. A 2 x 4.25 in lens and cover lens are replaceable, so keep spares.
- Look for markings. Look for a Z87 marking on the lens or frame.
See the oxygen acetylene cutting torch kit review for the type of torch these goggles are for.
Check current price on Amazon →
Pros and limitations
Pros
- Flip-up front is handy for setup and inspection.
- Replaceable lens and cover lens extend the life of the goggles.
- Flexible frame and elastic strap adjust to different faces.
Limitations
- Fixed shade 5 does not suit every torch size or metal thickness.
- No arc protection, so these cannot be used for stick, MIG or TIG welding.
- Goggles leave much of the face uncovered. Use a face shield for grinding or heavy spatter.
- Hobart’s page does not mention a safety standard, so inspect the markings.
Safe use and care
Replace scratched or cracked lenses, because a damaged lens can reduce impact protection. Wipe with a soft cloth and mild soap. Keep goggles away from heat and solvents that could warp the frame.
For oxy-acetylene work, follow gas safety basics: use regulators and flashback arrestors, keep oil and grease off oxygen fittings, and leak test with soapy water. Always wear proper gloves and flame-resistant clothing, and weld in a ventilated area.
Alternatives and related guides
- Miller shade 5.0 safety glasses for a glasses-style option.
- Oxygen acetylene cutting torch kit for the torch setup.
- Hobart 770502 oxy-acetylene kit for a Hobart torch kit.
- Auto-darkening welding goggles for arc welding goggles.
Frequently Asked Questions
What shade are the Hobart 770095 goggles?
Hobart lists them with a #5 shade lens. That is a moderate tint used for light gas welding and brazing. Always check a shade chart for your torch size and material, and pick a darker lens if the flame is uncomfortable.
Can I use the Hobart 770095 for MIG or stick welding?
No. Electric arc welding needs a much darker filter, commonly shade 10 or higher, plus full face protection. These goggles are for oxy-acetylene work only. Use a welding helmet for arc processes.
What size are the lenses in the 770095?
Hobart lists 2 x 4.25 inch lenses, with the lens and cover lens both replaceable. Check the lens size when ordering spares, and look for the shade number stamped on the lens.
Can I wear these over prescription glasses?
Hobart does not clearly say. Goggles of this type often fit over many frames, but the fit depends on your glasses. Try them on with your glasses, and consider a different style if they press on the frame.
Conclusion
The Hobart 770095 are simple shade 5 flip-front goggles for torch work with replaceable lenses. Match the shade to the job, check the markings, and keep them away from arc welding.
Check current price on Amazon →
