🔧 Practical welding guides, tested in a real garage
Plasma Cutter Reviews

Hypertherm 220941 Nozzle Review: 5 Pack

hypertherm powermax 45 nozzles

The Hypertherm 220941 nozzle is a 45 A plasma torch consumable, and the Amazon listing frames it as a Powermax 45 nozzle. This Hypertherm 220941 review flags a compatibility catch: Hypertherm retailers catalog 220941 for Powermax65, Powermax85 and Powermax105 torches, so confirm your torch before buying.

Quick specs at a glance

Item Details
Part number Hypertherm 220941
Type Plasma cutting nozzle, 45 A
Listed by retailers for Powermax65 / 85 / 105 hand and machine torches
Amazon listing says Powermax 45 nozzle, copper, about 0.07 kg
Verify Your torch model and consumable chart

Check current price on Amazon →

What this nozzle does

The nozzle shapes and focuses the plasma arc, and its orifice sets the cut width and quality at a given amperage. It is a wear part: spatter, blow-back and worn orifices slowly erode cut quality.

Because Hypertherm consumables are model-specific, the nozzle only works as intended with the right electrode, swirl ring and shield cap for your torch.

How to check it fits your plasma cutter

  1. Find your exact machine and torch model on the data plate (Powermax45, Powermax45 XP, Powermax65 and so on).
  2. Open the consumable parts list in the Hypertherm manual for that torch.
  3. Compare the nozzle part number with 220941. If your manual lists a different number, this is likely the wrong part.
  4. Check the amperage on the nozzle: 45 A parts are for 45 A cutting.
  5. Buy matching electrodes and swirl rings together.

Retailer pages list other part numbers, such as 220671 (see our 220671 plasma nozzle review), for the Powermax45. Treat that as a pointer to check, not a replacement for your manual.

Pros and limitations

  • Pros: Genuine Hypertherm part number in the title; copper nozzles are standard for plasma torches; a straightforward consumable swap.
  • Limitations: Possible mismatch with Powermax 45 torches; the listing gives no cut-capacity or lifespan figures that we could verify; consumable life depends on air quality and piercing habits.

Using and maintaining plasma nozzles

  • Use clean, dry compressed air. Moisture and oil are the fastest nozzle killers.
  • Avoid dragging the nozzle on the plate unless the torch is designed for drag cutting; stay at the recommended standoff.
  • Pierce at the right angle and height to reduce blow-back that damages the nozzle.
  • Wear a cutting shade lens (check your manual’s shade chart), gloves and cut in a ventilated area.
  • Disconnect power and let the torch cool before changing consumables.

View this nozzle on Amazon →

Frequently Asked Questions

Does Hypertherm 220941 fit a Powermax 45?

Not necessarily. Retailers such as Airgas catalog 220941 as a 45 A nozzle for Powermax65, Powermax85 and Powermax105 torches. Powermax45 models use different part numbers. Confirm your machine, torch type and the consumable list in your Hypertherm manual before ordering.

How do I know when a plasma nozzle needs replacing?

Look for a distorted or enlarged orifice, rough or angled cuts, excess dross, hard starts and a nozzle with visible pitting or arcing marks. Change the nozzle and electrode as a pair, since a worn one damages the other.

Can I mix nozzles from different amperages?

No. Use the nozzle, electrode, swirl ring and shield rated for the amperage you cut at, and follow the Hypertherm consumable chart for your torch. Mismatched parts cut poorly and shorten consumable life.

What air quality does a plasma cutter need?

Plasma cutters need clean, dry, oil-free compressed air at the pressure and flow in your manual. Moisture and oil quickly ruin nozzles and electrodes, so use a filter or dryer and drain the air line regularly.

Verdict

This is a genuine-style Hypertherm part number, but the Powermax 45 label on the listing is a red flag. Buy only after your manual confirms 220941 for your torch.

Check current price on Amazon →

Davis Anders
Davis C. Anders

Davis C. Anders has 15 years of experience in metal cutting, grinding and fabrication, and covers that side of Garage Welding, from angle grinders and plasma cutters to abrasive discs, clamps, magnets and welding tables. He has written for the site since September 2025, with grinder safety and troubleshooting guides, plasma cutter setup and consumable advice, and DIY jig and shop-tool builds. His aim is simple: help you pick the right tool or consumable for the job, set it up properly and cut or grind metal safely. His reviews are based on manufacturer specs and listing details.

Leave a Comment

Your email address will not be published. Required fields are marked *