As an Amazon Associate I earn from qualifying purchases. Buying through these links costs you nothing extra.
Quick answer: This IPT40 plasma cutter consumables kit is a third-party set of 24 parts: 8 electrodes, 8 nozzles and 8 retaining or protective caps. The listing names fit with YESWELDER CUT 55DS Pro and CUT 65DS machines that use an IPT40 torch. It is not a torch and not an official YESWELDER kit, so match the parts to your torch before ordering.
Plasma consumables wear with every cut, and the wrong shape can ruin arc stability. An IPT40 plasma cutter consumables kit helps only if it matches your exact torch. This page covers what the listing says is in the FUZIDDN 24-piece set, how to check IPT40 fit, how to change the parts safely and how to tell when they are worn. We have not tested the kit, so specs and the warranty details are listing claims you should confirm with the seller.
Specs at a glance (per the listing)
| Item | Per the listing |
|---|---|
| Brand | FUZIDDN |
| Type | Plasma torch consumables kit for IPT40 |
| Total pieces | 24 (8 electrodes, 8 nozzles, 8 caps) |
| Compatibility named | YESWELDER CUT 55DS Pro and CUT 65DS, listed for 2019 to 2024 models |
| Materials listed | Brass, stainless steel and zinc alloy |
| Package | About 3 x 2 x 3 inches and 7.2 oz |
| Support | Listing mentions a warranty; confirm the terms with the seller |
| Check before buying | Your torch revision and connector, and part numbers in your manual |
IPT40 plasma cutter consumables fit check
- Turn off and unplug the cutter and let the torch cool.
- Remove the retaining cap, nozzle and electrode, and look at their shape and length.
- Compare them with the listing photos and the IPT40 reference in the listing.
- Check your manual for the consumable part numbers for your exact machine.
- Confirm the torch connector matches. A model-name match alone is not enough, because torch and connector versions can differ within a product family.
- If a new part does not seat easily, stop and recheck. Never force it.
Pro tip: Keep one new electrode, nozzle and cap together as a reference set. Comparing worn parts against it shows erosion fast.
What the 8 / 8 / 8 mix gives you
The electrode carries the insert the arc starts from. The nozzle shapes the arc, and the cap holds it all in place. Having eight of each means you can swap worn parts without ending up with a lot of one and none of another.
The seller also describes a pre-threaded, tool-free change. Real swap time depends on how hot the torch is and how clean the threads are.
When to replace plasma consumables
| Sign | What it points to |
|---|---|
| Hard starting or a wandering arc | Worn electrode or nozzle |
| Oval or enlarged nozzle hole | Nozzle needs replacement |
| Rough edges and heavy dross | Worn parts or wrong travel speed or air pressure |
| Pitted electrode insert | Electrode needs replacement |
| Damaged threads on a cap | Replace the cap and check the torch head |
Wet or oily air shortens consumable life, so use a dry, filtered air supply.
Who should buy it
Best for
- Owners who have confirmed their torch is an IPT40 type.
- Shops that want spare parts and less downtime.
- Buyers fine with a third-party kit.
Skip if
- Your torch uses a different connector or consumable shape.
- You want an official YESWELDER consumables set.
- Your torch body, cable or trigger is damaged. Consumables will not fix that.
Safety
Safety note: Switch off and disconnect power before servicing the torch. Hot parts stay hot after the arc stops. Wear gloves and eye protection when changing parts, and use a plasma-rated helmet and flame-resistant clothing when cutting. Cut in a ventilated area and avoid coated or galvanized metal without proper fume control.
Pros and limitations
Pros
- A balanced 8 / 8 / 8 set of common wear parts.
- Aimed at a specific IPT40 torch setup.
- A tool-free threaded design per the listing.
- Compact for storage as backup stock.
Limitations
- Fit depends on your torch revision.
- Third-party parts, so performance claims are unverified.
- Warranty terms must be confirmed with the seller.
Alternatives to consider
OEM consumables give the surest fit if you can find the part numbers in your manual. To understand what each part does, see our guides to plasma cutter consumables, how to identify worn consumables and whether consumables are interchangeable. For a similar kit, see the ARCCAPTAIN IPT60 review.
Related guides: plasma cutter consumables explained · how to identify worn consumables · are consumables interchangeable
Frequently Asked Questions
Is this an official YESWELDER consumables kit?
No. The listing names FUZIDDN as the maker. It says the kit is compatible with selected YESWELDER machines that use IPT40 consumables.
What is in the 24-piece package?
Per the listing, 8 electrodes, 8 nozzles and 8 protective or retaining caps.
Will it fit every YESWELDER CUT 55DS Pro or CUT 65DS?
Do not assume so. The listing names 2019 to 2024 models, but torch and connector versions can differ. Check your installed consumables and manual.
How long do plasma consumables last?
There is no fixed life. It depends on amps, air quality, pierce method, material and cut length. Replace them by condition and cut quality.
How should I store spare parts?
Keep them dry, clean and protected from dust, impact and moisture.
