2×6 welding coupons are small steel plates you burn through while learning to run beads and make joints. This pack, listed as ten 2 by 6 inch pieces of 11-gauge mild steel (Alffun), is worth considering if you want cheap practice stock for MIG, TIG or stick. Skip it if you need thin sheet for automotive-style practice or an assortment of thicknesses. These 2×6 inch welding coupons are 11 gauge practice pieces.
Quick specs at a glance
| Item | Detail |
|---|---|
| Product | 2 x 6 in mild steel welding coupons, 10 pieces |
| Thickness | 11 gauge, about 0.120 in (3 mm) |
| Material | Mild steel, per the listing |
| Processes | Practice for MIG, TIG and stick |
| Joints | Butt, lap, T and fillet practice with two coupons |
| Not included | Filler metal, clamps or a welding table |
Specs are from the seller listing. Gauge is a nominal thickness, so measure with calipers if it matters.
What 2×6 welding coupons are and who they suit
A coupon is a standard-size test piece. You weld two together, look at the result, and if it fails you cut or bend it open to see why. Having ten means you can practice several joints and settings without hunting for scrap.
At 11 gauge, the steel is thick enough to be forgiving for beginners and for stick or flux-core on lighter machines, but thinner than the 1/4 inch plate used for structural practice. It is a sensible beginner pack, and it is also useful for dialing in settings on a new machine.
How to check it fits your practice plan
- Machine capacity: a small 120 V MIG or flux-core welder can handle 11 gauge, but may need multiple passes or edge bevels on butt joints.
- Process: mild steel works for MIG, TIG and stick. For aluminum or stainless practice, buy coupons in those metals.
- Quantity: 10 pieces gives about five two-piece joints, so plan how you will use them.
- Surface condition: check the listing photos for mill scale or oil. Grind or wire-brush before welding.
- Size: 2 x 6 in is small, so it is not enough for long-bead practice.
Pros and limitations
Pros
- Uniform size and thickness, so your results are comparable.
- Mild steel is the easiest material to learn on.
- Good for testing settings, tack welds and fit-up.
- Cheaper than cutting up new stock.
Limitations
- Single thickness, so no thin sheet or thick plate practice.
- Small plates heat quickly and warp or burn through if you rush.
- Not pre-cleaned or beveled, so you will prepare edges yourself.
- Only ten pieces, so heavy practice runs out quickly.
How to practice with them
- Clean the surfaces and edges to bright metal with a flap disc or wire brush.
- Start with a bead on plate, then move to a fillet on a T joint, then a butt joint with a small gap.
- Clamp or tack the coupons so they cannot move, and let them cool between passes.
- Bend-test or cut sections to inspect penetration, and note the settings you used.
Wear a proper welding helmet, gloves and long sleeves. Coupons stay hot long after welding, so use pliers and a quench bucket or a fire-safe tray.
Alternatives and related guides
- 18-piece welding practice kit: more pieces for longer practice sessions
- welding practice kit: another bundle for learning joints
- Therwen 9-piece practice kit: a smaller set with different piece types
- welding table clamps: for holding coupons while you tack
Frequently Asked Questions
What gauge are these welding coupons?
They are listed as 11 gauge mild steel, which is about 0.120 inch or roughly 3 mm. That is a good all-around thickness for learning, though it is a bit heavy for very small 120 V machines on butt joints unless you bevel.
Can I use them for TIG and stick welding?
Yes. Mild steel coupons are suitable for MIG, TIG and stick practice. For TIG, clean them well and use a suitable filler rod such as ER70S-2 or ER70S-6. For stick, a 6013 or 7018 electrode is common.
How do I test a practice weld?
Inspect the bead first, then cut or bend a sample to look for lack of fusion or porosity. Clamp one end in a vise and hammer or bend the joint to see if it breaks at the weld rather than the base metal.
Are these coupons suitable for sheet metal practice?
Not really. At 11 gauge they are thicker than typical auto-body sheet. For thin panels, practice on 18 to 22 gauge steel instead. Use these for general fabrication and structural-style joints.
Final verdict
These 11 gauge 2×6 welding coupons are a low-cost way to practice beads and joints in mild steel. They suit beginners and settings tests, but only in one thickness. Check the current listing for the quantity and details.