As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The Victor 0381-1928 CA2460+ is a medium-duty oxy-fuel cutting attachment with a 90 degree forged brass head that mounts on a compatible Victor torch handle. It is worth considering if you already own, or plan to buy, a matching handle and want a replacement or upgrade for cutting steel, and it is not a complete torch kit. This Victor CA2460+ review is based on the Amazon listing and public specifications, not hands-on testing.
Victor CA2460+ at a glance
| Item | Listed detail |
|---|---|
| Part number | 0381-1928 (CA2460+) |
| Type | Medium-duty cutting attachment, 90 degree head |
| Head | Die-forged brass |
| Cutting tips | Series 1 cutting tips (sold separately) |
| Handle fit | Retailers list the 315FC+ handle as compatible |
| Capacity | Up to 8 in of steel per retailer data |
| Design notes | Hand-tighten coupling nut, single-nut mixer access, snap ring |
Check the Amazon listing for current compatibility notes, since attachments, handles and tips come in several series.
Check the current price on Amazon →
What it is and who it suits
A cutting attachment fits onto a torch handle and adds the cutting oxygen lever, preheat valves, mixer and tip. This one is a name-brand, medium-duty design for shops and serious hobbyists who cut mild steel plate, bar and pipe regularly.
It is less attractive if you want a ready-to-use kit. For a complete package, compare the Victor CA2460 and CA2470 torch kit, the Hobart 770502 kit or a budget oxygen acetylene cutting torch kit.
How to check it fits your setup
- Check your handle. Look for the handle model, such as 315FC+, and confirm the handle and attachment connection match.
- Check the tip series. This attachment takes Series 1 cutting tips. Do not mix tip series.
- Choose the fuel gas. Use tips designed for your fuel (acetylene, propane or propylene).
- Check hoses and regulators. Make sure the hose size and regulator capacity suit the tip size you plan to use.
- Add safety devices. Fit flashback arrestors and check valves at the regulator or torch.
Pros and limitations
Pros
- Known name with wide availability of parts and tips.
- Forged brass 90 degree head is the common cutting-torch layout.
- Single-nut mixer access can make cleaning and servicing easier.
- Medium-duty rating covers most garage and farm cutting tasks.
Limitations
- It is an attachment only, so handle, tips and gas gear cost extra.
- Series and fuel compatibility need care when ordering tips.
- Oxy-fuel cutting is for steel, and it is slower and messier than plasma for thin sheet.
- Costs more than generic kit torches.
Use and safety tips
- Hand-tighten the coupling nut. If it does not seal, inspect the o-rings and replace them.
- Leak test all joints with soapy water. Never use oil or grease on oxygen parts.
- Keep acetylene delivery at or below 15 psi, and set oxygen according to the tip chart.
- Purge the lines, light the preheat flame, adjust to neutral, then press the cutting lever to start the cut.
- Wear a proper shade lens, leather gloves, a flame-resistant jacket and boots, and clear flammables.
- Never cut closed containers or drums that held fuel, and take extra care with coated or galvanized steel.
- Clean tips with the right size cleaner and replace damaged tips.
Alternatives and related guides
- Cutting torch tip cleaner to keep tips working.
- Victor cutting torch valve stem for service parts.
- Riverweld acetylene cutting tips for replacement tips; check series first.
See this attachment on Amazon →
Frequently Asked Questions
Does the Victor CA2460+ include a torch handle?
No. The 0381-1928 is a cutting attachment only. It mounts on a compatible torch handle such as the Victor 315FC+ handle according to retailer data, and you also need Series 1 cutting tips, regulators, hoses and gas. Check the listing for exactly what is in the box.
What can the CA2460+ cut?
Retailer specifications describe it as a medium-duty attachment with a rated cutting capacity of up to 8 inches of steel with suitable tips and gas supply. Actual results depend on the tip, regulator settings, gas flow and the metal’s condition. Oxy-fuel cutting is for steel, not aluminum or copper.
Which tips fit the CA2460+?
Retailer pages list Series 1 cutting tips. Tip numbers differ by fuel gas (acetylene, propane, propylene), so choose the tip for your fuel and the plate thickness, and check Victor’s current tip chart for exact part numbers.
Why does the connection nut have no wrench flats?
Victor describes the design as hand-tightening only, with a snap ring that helps keep the coupling nut in place. Overtightening with tools can damage the o-rings or seats. Tighten by hand firmly, leak test with soapy water and replace worn seals.
Conclusion
The Victor CA2460+ is a medium-duty cutting attachment for people who already have, or are building, a Victor-style setup. Confirm the handle, tip series and fuel gas, and follow oxy-fuel safety practice.
Check the latest price on Amazon →
