7018 welding rods are low-hydrogen stick electrodes for strong, crack-resistant welds on mild and structural steel. They run smoothly but need clean metal and dry storage. For most shop work buy 3/32 inch rods for thinner steel and smaller machines and 1/8 inch rods for thicker steel.
The ten picks below are E7018 packs from ArcCaptain, YesWelder, Tooliom, Forney, Sunstac, Startechweld and PGN. Details come from each Amazon listing; Garage Welding has not run these products in the shop.
As an Amazon Associate I earn from qualifying purchases. Buying through these links costs you nothing extra.
Top Picks: 7018 Welding Rods by Use
|
Use case |
Product |
|---|---|
|
General use |
|
|
Value |
|
|
For Heavy Work |
|
|
Versatile pick |
|
|
Pick for frequent use |
|
|
Budget |
|
|
For AC Welders |
|
|
Starter Pack |
|
|
For Thick Metal |
|
|
Low-Cost |
How to Choose 7018 Welding Rods
- Pick the diameter. 3/32 inch suits thinner steel and lower-amp machines. 1/8 inch suits thicker steel and needs more current, so check your welder’s output.
- Check AC or DC. E7018 is classified for AC or DC electrode positive. Low-power AC machines can struggle with it, and a rod sold for AC, like the Forney listing here, is formulated for that use.
- Store it dry. Low-hydrogen coatings absorb moisture, which leads to porosity and cracking. Keep rods sealed and follow the maker’s instructions for re-drying.
- Prep the joint. 7018 is not a rust-tolerant rod. Grind off rust, paint and mill scale first, or choose E6010 or E6011 for dirty metal.
- Pick the pack. Packs here are 5 lb or 10 lb. A 10 lb box only makes sense if you will use the rods before moisture becomes an issue.
How These Rods Were Picked
The list uses the titles, sizes, pack weights and descriptions on the Amazon listings. Garage Welding has not tested these rods, so there are no scores or test results here. Confirm the class, diameter and pack on the listing before you order.
The 10 E7018 Rods Compared
If you need a dependable 7018 rod that works across routine repairs and heavier fabrication, this 10 lb ARCCAPTAIN pack is a practical choice. You’ll get low-hydrogen E7018 electrodes that strike reliably, lay a steady bead, and give you good control over the arc whether you’re patching a trailer, fixing farm equipment, or doing light structural work.
The bulk package keeps enough rods on hand for longer projects, and they suit beginners and experienced welders. Treat them like any E7018 product and keep them dry, and you’ll find they offer consistent results job after job.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Easy |
|
Arc Control |
Easy |
|
Bead Consistency |
Easy |
|
Storage Handling |
Moderate |
Versatility
You can use these rods for everyday garage fixes, equipment maintenance, and many shop fabrication tasks. They suit novice welders learning stick welding as well as experienced users tackling structural or repair work.
Key Benefits
- Steady bead with good arc control
- Low-hydrogen formulation for fewer defects
- Large 10 lb pack for medium-to-large projects
- Packaging that helps keep rods usable
If you want dependable rods that behave predictably, this 3/32″ pack from YESWELDER is a solid pick. You’ll find they strike easily, run consistently, and produce tidy beads whether you’re doing tractor repairs, general maintenance, or small fabrications.
The storage box and consistent coating make them one of the contenders when you’re shopping for 7018 rods that balance quality and everyday usability. They’re a practical budget choice.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Easy |
|
Arc Control |
Easy |
|
Bead Quality |
Easy |
|
Amperage Tuning |
Moderate |
|
Storage Handling |
Easy |
Versatility
These rods work well for garage repairs, farm equipment, and everyday shop fabrication. They’re suitable for tight fit-ups and are commonly used as a go-to 7018 option for both hobbyists and pros.
Key Benefits
- Consistent strike and burn
- Good bead appearance with tight fit-ups
- Convenient storage box keeps rods protected
- Budget E7018 option
If you want a reliable 1/8″ E7018 for regular shop work and heavier repairs, this 10 lb YESWELDER pack is a smart option. You’ll find the rods strike consistently, produce clean beads, and work across common tasks like equipment maintenance, trailer fixes, and light structural welding.
They’re a practical pick whether you’re stocking up for ongoing projects or looking for a dependable rod to teach a beginner. Treated and packaged to stay usable, they rank among the contenders when you’re comparing 7018 rods for everyday use.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Easy |
|
Arc Control |
Easy |
|
Bead Quality |
Easy |
|
Amperage Tuning |
Moderate |
Versatility
These rods suit garage fixes, farm equipment repairs, and many shop fabrication tasks. They work for beginners learning stick welding and for experienced users tackling routine structural or maintenance work.
Key Benefits
- Consistent strike and burn
- Clean bead appearance with good penetration
- 10 lb supply for longer jobs or frequent use
- Well packaged for storage and handling
When you’re comparing 7018 rods, this dual-size YESWELDER pack is a handy middle ground. You get both 3/32″ and 1/8″ rods in a single container, which makes switching sizes quick during repairs, maintenance, or small fabrication jobs. The container has internal dividers that help keep rods organized and protected, so you can grab the right diameter without rummaging. If you want flexibility for daily shop tasks and occasional heavier work, this kit is a practical choice that keeps things simple.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Easy |
|
Switching Sizes |
Easy |
|
Arc Control |
Easy |
|
Bead Consistency |
Easy |
|
Storage Handling |
Easy |
Versatility
This kit covers common shop repairs, farm maintenance, and light structural work, making it a go-to option when you want flexibility without buying separate boxes.
Key Benefits
- Two common diameters in one container
- Divided container keeps the two sizes organized
- Consistent strike and burn across sizes
- Good for tight fit-ups and low spatter
If you want dependable 1/8″ rods for regular shop work and heavier fixes, this TOOLIOM 10 lb pack is worth a look. You’ll find the rods strike cleanly, lay a steady bead, and handle common tasks like equipment maintenance, trailer repairs, and light structural work.
The bulk pack keeps you stocked for longer projects and the low-hydrogen chemistry helps reduce porosity when you keep the rods dry. For anyone comparing 7018 rods, this one balances day-to-day reliability with straightforward handling.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Easy |
|
Arc Control |
Easy |
|
Bead Consistency |
Easy |
|
Amperage Tuning |
Moderate |
|
Storage Handling |
Moderate |
Versatility
Works for garage repairs, farm equipment maintenance, and general shop fabrication, making it a solid all-rounder for both beginners and more experienced welders.
Key Benefits
- Consistent strike and burn
- Low-hydrogen formulation for cleaner welds
- Large 10 lb supply for extended projects
- Packaged for workshop storage
When you’re comparing 7018 rods, this Sunstac 1/8″ 5 lb pack is a dependable, no-nonsense option. You’ll get low-hydrogen E7018 electrodes that strike reliably and lay a clean bead, which makes them useful for routine garage repairs, farm maintenance, and light structural work.
The smaller 5 lb size is easy to store and handy when you don’t need a bulk box, and the rods are forgiving enough for someone still getting comfortable with stick welding. If you want a straightforward rod that behaves predictably across common jobs, this one fits the bill.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Easy |
|
Arc Control |
Easy |
|
Bead Appearance |
Easy |
|
Storage Handling |
Moderate |
Versatility
Works well for everyday garage fixes, small fabrications, and equipment maintenance. It’s a practical choice when you want reliable 7018 performance without overcomplicating your setup.
Key Benefits
- Consistent strike and clean bead
- Low spatter for easier cleanup
- Good pack size for occasional projects
- Suitable for both beginners and experienced users
When you’re scanning 7018 rods, Forney’s 1/8″ AC E7018 is a dependable choice for AC machines and basic shop work. It is listed as an AC rod, and E7018 restrikes easily, which helps when you are working on repairs or learning stick welding.
It’s a solid pick for garage fixes, farm equipment maintenance, and light structural work where predictable performance matters.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Easy |
|
Restriking |
Easy |
|
Penetration |
Easy |
|
Amperage Range |
Moderate |
|
Storage Handling |
Moderate |
Versatility
This rod fits everyday garage work, equipment repair, and many shop projects, and it’s handy when you want a reliable AC-capable E7018 without fuss. It’s a practical option whether you’re a learner or an experienced welder keeping a go-to rod on hand.
Key Benefits
- Smooth flow and strong penetration
- Easy restrike reduces wasted rods
- Listed as an AC E7018 rod
- Widely sold Forney E7018 AC rod
If you want a compact, reliable 1/8″ E7018 pack for regular shop tasks, this 5 lb TOOLIOM option is worth considering. You’ll get rods that strike cleanly, lay consistent beads, and handle common repairs like trailer fixes, metal frames, and routine maintenance.
The smaller pack is easy to store and handy when you don’t need a bulk box, and it’s a solid pick when you’re comparing 7018 rods for everyday projects and learning stick welding.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Easy |
|
Arc Control |
Easy |
|
Bead Consistency |
Easy |
|
Amperage Tuning |
Moderate |
|
Storage Handling |
Moderate |
Versatility
These rods cover garage repairs, light fabrication, and equipment maintenance, making them a practical go-to for hobbyists and pros who want dependable, easy-to-use 7018 performance.
Key Benefits
- Predictable strike and arc control
- Low-hydrogen formula for cleaner welds
- Handy 5 lb size for easy storage
- Consistent bead appearance with low spatter
If you want a straightforward 1/8″ E7018 for typical shop and repair tasks, this STARTECHWELD 5 lb box is worth considering. You’ll find rods that deliver solid penetration and smooth beading on 220 V machines and standard shop welders.
They aren’t the best fit for the smallest 110 V palm-sized units, but for garage fixes, light structural work, and routine maintenance they hold up well. When you’re weighing 7018 rods for general use, this option is a practical, no-nonsense choice.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Moderate |
|
Arc Stability |
Easy |
|
Bead Control |
Easy |
|
Suitability For Small Welders |
Difficult |
Versatility
Best for garage repairs, metal fabrication, and maintenance on standard shop equipment; less suited for very low-power portable welders.
Key Benefits
- Consistent penetration and smooth bead
- Low spatter for easier cleanup
- Good for standard 220 V and shop welders
- Described as AWS/SFA 5.1 E7018 per the listing
When you’re weighing 7018 rods, this PGN 3/32″ pack is a practical option if you want a rod that handles maintenance and light structural repairs. It is an all-position E7018 for clean, prepared steel, useful around the shop or out on the job. The packaging includes a foil inner layer that aims to keep rods ready to weld, and the 3/32″ size is a nice middle ground for general-purpose work. Inspect rods as you open the pack for cracked coating, and store them dry.
Ease of Use
|
Feature |
Ease Level |
|---|---|
|
Striking |
Moderate |
|
Arc Stability |
Easy |
|
Bead Control |
Easy |
|
Flux Durability |
Moderate |
Versatility
Works well for garage repairs, outdoor maintenance, and general fabrication on both AC and DC machines, making it a solid pick when you want a do-it-all 3/32″ rod.
Key Benefits
- All-position E7018 for prepared mild steel
- All-position performance for flexible use
- Foil-lined packaging for storage protection
- Useful mid-size diameter for general repairs
Related guides: how to store low-hydrogen electrodes | which welding rods need oven storage | stick welding amperage chart | E7018 welding rods review
FAQ
What are 7018 welding rods used for?
E7018 is used for structural steel, thick plate and repairs where crack resistance matters. Its low-hydrogen coating makes tougher welds than general-purpose rods such as E6013.
Do 7018 rods need to be kept dry?
Yes. E7018 absorbs moisture from the air, which can cause porosity and hydrogen cracking. Keep unused rods sealed or in a rod oven and follow the manufacturer’s instructions.
Is 7018 harder to run than 6013 or 6011?
A little. It needs clean metal, a short arc and dry rods, but many beginners learn on it. E6013 is more forgiving of a loose arc, and E6011 is better on dirty metal.
Can I run 7018 on an AC welder?
E7018 is classified for AC or DC electrode positive, but low-power AC machines may struggle with some brands. A rod marked for AC, such as the Forney listing here, is a safer choice.
Bottom Line
Choose E7018 when weld strength and crack resistance matter, buy 3/32 inch for thinner steel and 1/8 inch for thicker steel, and match the pack size to how quickly you will use it.
Keep the rods dry, prep the joint, and check the amperage range printed on the box before you strike an arc.
| Product Name | Image | Weight | Size | Material Type |
|---|---|---|---|---|
| ARCCAPTAIN E7018 Welding Rod 1/8” 10LB |
![]() |
10.21 pounds | 1/8″ | Low Hydrogen Carbon Steel |
| YESWELDER E7018 3/32” 5LB Welding Rod |
![]() |
5.19 pounds | 3/32″ | Low Hydrogen Carbon Steel |
| YESWELDER E7018 1/8” 10LB Welding Rod |
![]() |
10.34 pounds | 1/8″ | Low Hydrogen Carbon Steel |
| YESWELDER E7018 3/32″(2.5lb)+1/8″(2.5lb) Welding Rod |
![]() |
5.19 pounds | 3/32″ + 1/8″ | Low Hydrogen Carbon Steel |
| TOOLIOM E7018 Low Hydrogen Welding Rod 1/8″ 10LB |
![]() |
10.1 pounds | 1/8″ | Low Hydrogen Carbon Steel |
| E7018 Welding Rod 1/8″ 5LB |
![]() |
5.24 pounds | 1/8″ | Low Hydrogen Carbon Steel |
| Forney 30685 E7018 AC Welding Rod |
![]() |
2.4 pounds | 1/8″ | Mild Steel |
| TOOLIOM E7018 Low Hydrogen Welding Rod 1/8″ 5LB |
![]() |
5.13 pounds | 1/8″ | Low Hydrogen Carbon Steel |
| 7018 Welding Rod 1/8″, E7018 Stick Welding Electrodes |
![]() |
5 pounds | 1/8″ | Carbon Steel |
| PGN E7018 Welding Rod 3/32″ 5LB |
![]() |
5.17 pounds | 3/32″ | E7018 – 5 lb |



















