The Antrader tee copper fitting is a small copper tee sold for plumbing, HVAC and refrigeration-style tubing. The Amazon listing describes it as red copper with a sweat-solder style tee, but the size details in the listing are not consistent, so confirm the exact size and connection type before you order.
This is a plumbing and HVAC part rather than a welding product, so it only matters here if you braze or solder copper in the shop. This review is based on the listing and general copper-fitting practice, not hands-on testing.
Antrader Tee Copper Fitting Details
| Item | Detail (per the Amazon listing) |
|---|---|
| Type | Copper tee fitting |
| Material | Red copper |
| Connection | Described as sweat-solder; also mentions 1/4 in NPT, which is a threaded size |
| Size mentions | 3/4 in and 1/4 in both appear in the listing text |
| Listed item size | About 1 x 0.3 x 0.55 in |
| Listed weight | About 2.4 oz |
NPT is a pipe thread, while a sweat fitting is joined with solder or braze. Make sure the listing photos and size options match what you need.
Check These Before You Buy
- Connection type. Decide whether you need a sweat (solder or braze) tee or a threaded one. They are not interchangeable.
- Tube size. Match the fitting to the outside diameter of your tubing. Confirm whether the listing size is the inside or outside diameter.
- Use. Check that the part is intended for your use, whether water, refrigerant or air. Do not assume it is rated for drinking water or refrigerant.
- Lead-free and certification claims. Look for any rating or marking on the product or packaging. Do not assume them from the listing text.
- Pressure and temperature. Ask the seller for a rating if the job needs one.
Joining a Copper Tee
Copper fittings are joined by cleaning, fluxing and heating the joint until the filler flows into the gap.
- Cut the tube square and deburr it.
- Clean the tube end and the fitting socket until bright.
- Apply flux, fit the pieces together and support them.
- Heat the fitting, not the filler, and feed filler into the joint until it wicks around.
- Let the joint cool without moving it, then wipe off flux residue.
For refrigerant and HVAC work, brazing is the normal method. See our guides on how to braze HVAC copper lines without leaks and how to braze HVAC copper pipe without soldering.
Pros and Limitations
Pros
- Small, light copper part.
- Copper handles heat from soldering or brazing.
- Low-cost way to add a branch to tubing.
Limitations
- Size and connection details in the listing are inconsistent.
- Certifications and pressure ratings are not confirmed.
- Not a welding product.
Alternatives and Related Guides
- Copper tee for 3/4 OD tubing is a closer match if you need that size.
- Straight coupling copper fittings are for straight joins.
- Straight copper coupling fitting (pcs) is another pack to compare.
Frequently Asked Questions
What size is the Antrader tee copper fitting?
The listing text mentions both 3/4 in and 1/4 in. Check the size options and photos on the product page before ordering.
Is it a sweat fitting or a threaded fitting?
The listing calls it a sweat-solder style tee but also mentions 1/4 in NPT. Confirm the connection type with the seller.
Is it safe for drinking water?
The listing does not give us a confirmed rating. Look for lead-free and potable water markings on the product before using it for drinking water.
How do I join a copper tee?
Clean the tube and socket, apply flux, heat the fitting and let the filler flow into the joint. Let it cool before moving it.
Bottom Line
The Antrader tee copper fitting is a small copper branch fitting. Confirm the size, connection type and any ratings before you buy.