The Century MIG gun stinger is a replacement torch lead that the listing says suits Century-brand MIG welders in the 125 GS and 155 GL range. It is worth considering if your original gun has failed and you can match the part number and connector. Skip it if you are guessing at fit, because MIG guns differ by connector, trigger wiring and consumable style. This review is based on the Amazon listing and general MIG practice, not hands-on testing.
Century MIG Gun Stinger at a Glance
| Item | Per the listing |
|---|---|
| Type | Replacement MIG gun (stinger torch) with lead |
| Cable length | 10 ft |
| Machines named | Century models such as 125 GS, 135 GS and 155 GL (verify exact list) |
| Replaces part numbers | Listing mentions 238-566-000 and 238-593-000 |
| Welder model numbers mentioned | 83125, 83136, 83170 |
| Package weight and size | About 3 lb, 12 x 12 x 2.5 in. |
| Warranty | See the product page; terms are not clear from the text |
The listing mentions several model names and numbers. Treat them as a starting point and confirm them yourself. Prices change, so check the current listing.
What It Is and Who It Suits
The gun is the handheld part of a MIG welder. It carries wire, shielding gas and current to the contact tip. When the trigger fails, the lead kinks, the liner clogs or the connector wears, replacing the whole gun is often simpler than repairing it.
It suits owners of older Century or similar rebadged light-duty MIG machines who need a straight swap. If your machine is a different brand that happens to be physically similar, you must verify the connector, trigger wiring and consumables.
How to Check It Fits Your Welder
- Find your model. Look at the data plate on the welder. Write down the model and any catalog or part number.
- Match the old gun. Compare the connector end of your current gun with photos in the listing: the size of the brass or plastic plug, the screw or lock-nut, and the trigger leads.
- Compare consumables. Check the nozzle, contact tip and diffuser style. Changing guns often means changing consumables too.
- Match wire size. The tip must match your wire diameter, such as 0.030 or 0.035 in.
- Confirm the length. 10 ft gives you reach, but a longer lead can make wire feeding harder. If your machine originally used a shorter gun, check that the feeder is happy with it.
- Read the return terms. If you can return it easily, you can test fit with less risk.
Pros and Limitations
Pros
- A full replacement gun is simpler than rebuilding a worn one.
- 10 ft lead gives workable reach around a project.
- Part numbers in the listing help cross-checking.
Limitations
- Fit depends on exact model and revision.
- Third-party replacement guns may use different trigger wiring or liner details than original ones.
- Does not change the welder’s limits on duty cycle, thickness or materials.
- Warranty and support depend on the seller.
Installation, Safety and Care
- Unplug the welder before removing or installing the gun.
- Take a photo of the old wiring and connections first.
- After installing, feed wire and check that the drive rolls and tip match the wire.
- Leak-test gas fittings with soapy water if you use shielding gas.
- Keep the lead straight when welding; sharp bends cause feeding problems and wear the liner.
- Replace the liner and contact tips as they wear. A dirty liner is a common cause of erratic feeding.
- Wear a proper helmet, gloves and flame-resistant clothing, and weld only in ventilated areas.
Alternatives and Related Guides
- Need a liner? Read the MIG welding liner conduit review.
- Replacing tips as well? See MIG welding contact tips 186-419 review.
- Store the gun safely with the magnetic MIG torch gun holder review.
- Different brand? See the MIG gun torch review.
Frequently Asked Questions
Which Century welders does this MIG gun stinger fit?
The listing names Century models in the 125 GS to 155 GL range and lists several part numbers. Models and revisions vary, so compare your welder model, the old gun part number and the connector style with the listing before ordering.
Can this gun weld aluminum or stainless steel?
The gun is just the delivery part. What you can weld depends on your welder, wire, drive rolls, liner and shielding gas. Aluminum needs special wire and setup, and a basic Century-style machine is generally aimed at mild steel, so confirm with the manufacturer.
Can I use this gun for gasless flux-core welding?
If your Century machine supports flux-core wire, the gun can feed it, but you may need the correct drive roll and tip size for that wire. Flux-core produces more smoke and spatter, so ventilate well and check your manual for polarity.
How do I install a replacement MIG gun?
Unplug the welder, remove the old gun from the wire feeder, and note the wiring and gas connections. Install the new gun the same way, feed the wire, set the tip size to match, and test for gas leaks. Follow your welder manual.
Verdict
This is a practical swap-in gun only if the model and connector match. Verify the part numbers, buy matching consumables and treat the listing’s model list as a guide, not a guarantee.