Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Good TIG welds depend on more than machine settings. Your torch consumables also affect shielding gas coverage, arc control, tungsten stickout, and access around the joint. The 24PC TIG Kit gives WP17, WP18, and WP26 torch users a jumbo gas lens setup with ceramic cups, collets, insulators, and back caps in one package. This review helps you decide if it is a useful upgrade for cleaner TIG work, or if you should skip it because of compatibility or setup needs.
Quick Verdict
Rating: 8.2/10
Best For: TIG welders using WP17, WP18, or WP26 torches who want a jumbo gas lens setup
Bottom Line: This kit gives you a useful mix of 1/8 in gas lens parts, alumina cups, collets, insulators, and back caps for better shielding control. Its biggest tradeoff is that it only makes sense if your torch accepts this WP17/18/26 jumbo setup.
Key Specifications
| Specification | Detail |
|---|---|
| Brand | Generic |
| Manufacturer | Tonyweld |
| Model Number | 995795 |
| ASIN | B0CNS4YC43 |
| Product Type | TIG torch jumbo gas lens accessory and consumable kit |
| Package Quantity | 24 pieces, sold as 1 kit |
| Torch Compatibility | Listed for WP17 and WP26 air-cooled torches and WP18 water-cooled torches |
| Gas Lens Size | 1/8 in / 3.2 mm jumbo gas lens, part 995795 |
| Collets | 4 pieces, 1/8 in / 3.2 mm TIG collets, 10N25 |
| Gas Lens Insulators | 2 pieces, 54N63 |
| Ceramic Cups | 8 large-diameter alumina cups: 2 each of #6 57N75, #8 57N74, #10 53N88, and #12 53N87 |
| Back Caps | 6 total back caps: short, medium, and long sizes |
| Best Use | Shielding control, longer tungsten stickout, stainless steel work, aluminum TIG, and tight access jobs |
| Safety Note | Confirm torch fit, tighten parts correctly, and follow your TIG welder and torch manual before use |
What Is the 24PC TIG Kit?
The 24PC TIG Kit is a jumbo gas lens consumable set for compatible WP17, WP18, and WP26 TIG torches. It includes front-end parts that shape shielding gas flow, plus back caps that help you set up the torch for different reach needs.
The core parts are the 1/8 in / 3.2 mm jumbo gas lenses, matching 10N25 collets, 54N63 insulators, and large-diameter alumina cups in #6, #8, #10, and #12 sizes. These parts help you tune gas coverage around the weld puddle instead of relying on one basic cup size for every job.
This is not a welding machine, torch, regulator, tungsten pack, or filler rod set. It is an add-on consumable kit for welders who already have a compatible TIG torch and want more control at the torch head.
Who Should Buy It?
Best For
- Welders using compatible WP17, WP18, or WP26 TIG torch setups
- Fabricators who want larger cup options for better shielding coverage
- Users welding stainless steel, aluminum, or joints that need extra tungsten stickout
Skip If
- Your torch is a WP9, WP20, WP25, or another smaller torch series
- You need tungsten electrodes, filler rods, a regulator, or a complete TIG torch
- You prefer branded OEM consumables with documented fitment from your torch maker
Key Features and Performance Breakdown
Jumbo Gas Lens System
The biggest reason to buy this kit is the 1/8 in / 3.2 mm jumbo gas lens setup. A gas lens uses a screen-style diffuser to smooth shielding gas flow before it reaches the weld area. That can help reduce turbulence compared with a basic collet body, especially when you need a steadier gas envelope.
Better gas coverage matters most when the weld puddle reacts quickly to oxygen, such as stainless steel and aluminum work. It can also help when you extend the tungsten farther than usual to reach a corner, tube joint, or blocked area.
Large-Diameter Alumina Ceramic Cups
The kit includes 8 alumina cups in four sizes: #6, #8, #10, and #12. You get 2 cups of each size, which gives you spares while still letting you test different coverage patterns.
The smaller #6 and #8 cups are useful when you need better access and less torch bulk. The larger #10 and #12 cups give you a wider gas coverage area, which can help on wider weld puddles, stainless work, and jobs where the tungsten must stick out farther.
1/8 in / 3.2 mm Collet Setup
This kit centers on 1/8 in / 3.2 mm consumables. The included 10N25 collets are designed for 1/8 in tungsten, so this is not the right kit if you mainly run smaller 1/16 in or 3/32 in tungsten.
That detail matters because TIG consumables must match your tungsten diameter. A mismatched collet can hold the tungsten poorly, cause unstable arc starts, or make setup frustrating.
Back Cap Flexibility
The 6 included back caps give you short, medium, and long options. Short caps help when you need to fit the torch into a tight space, while longer caps support longer tungsten lengths and more conventional bench setups.
This variety is helpful for repair work because every joint is not easy to reach. You can set the torch up differently for flat bench work, inside corners, frame repairs, tubing, and small fabrication jobs.
Pro Tip: Match the cup size to the weld area, not just the material. Use a smaller cup for tight access, and move up to a #10 or #12 cup when you need wider shielding coverage or longer tungsten stickout.
Compatibility and Safety Notes
This kit is listed for WP17 and WP26 air-cooled torches and WP18 water-cooled torches. Those torch families are common in TIG welding, but you should still check your torch model, thread style, and current consumable setup before ordering.
Do not force a cup, collet, gas lens, or insulator onto a torch that does not fit. Cross-threaded parts can damage the torch head and create poor gas flow. After installing new consumables, check that the tungsten seats firmly, the cup is secure, and shielding gas flows normally before striking an arc.
Use normal TIG safety practices, including eye protection, gloves, ventilation, and correct shielding gas setup. This kit can improve gas delivery at the torch, but it does not replace correct machine settings, clean base metal, or safe welding technique.
Before You Buy: Confirm that your torch accepts WP17, WP18, or WP26 jumbo gas lens consumables and that you want the 1/8 in / 3.2 mm size. This kit is not a universal TIG accessory set.
Setup Tips Before First Use
Start by laying out the gas lenses, collets, cups, insulators, and back caps so you can confirm the parts match the listing. Because this is a 24-piece kit, it is easy to mix small parts if you open the package on a cluttered bench.
Install the gas lens and matching collet first, then add the insulator and ceramic cup. Set tungsten stickout conservatively at first, then increase it only when you need extra reach and still have good shielding coverage.
Use a flow setting that matches your cup size, joint, and shop conditions. A larger cup does not automatically mean a better weld if gas flow is too low, too high, or disrupted by drafts.
How It Performs in Real Use
Thin Sheet Metal
On thin sheet metal, a stable arc and controlled gas coverage help you focus on heat input. The gas lens setup can make the arc feel more predictable, but you still need the correct amperage, tungsten prep, and travel speed to avoid burn-through.
Stainless Steel TIG
Stainless steel is one of the best reasons to consider this kit. The larger #10 and #12 cups can give the weld zone broader shielding coverage, which may help reduce discoloration when your setup, gas flow, and cleaning are correct.
Aluminum Welding
Aluminum benefits from consistent shielding and a clean tungsten setup. This kit can help with smoother coverage around the puddle, but it will not fix dirty material, poor AC balance, or incorrect machine settings.
Repair and Fabrication Work
For general repairs, the mix of cup sizes and back caps gives you more ways to configure the torch. Short caps help around tight brackets and corners, while larger cups help when you have enough access and want wider gas coverage.
Pros and Cons
Pros
- Includes a complete 24-piece jumbo gas lens setup for compatible WP17/18/26 torches
- Comes with #6, #8, #10, and #12 alumina cups for different coverage needs
- Includes 4 matching 1/8 in / 3.2 mm 10N25 collets
- Short, medium, and long back caps help with tight spaces and standard bench work
- Useful for welders who want better shielding control without buying a new torch
Cons
- Limited to compatible WP17, WP18, and WP26 torch setups
- Built around 1/8 in / 3.2 mm consumables, so it may not fit your usual tungsten size
- Does not include tungsten electrodes, filler rod, regulator, or a complete torch
Want to Check the Kit?
Review the current product details and confirm the 1/8 in / 3.2 mm WP17/18/26 fit before buying.
Is It Worth the Price?
This kit is worth considering if you already use a compatible WP17, WP18, or WP26 torch and want to move from a basic cup setup to a jumbo gas lens setup. You get several useful consumables in one kit instead of buying cups, collets, gas lenses, insulators, and back caps separately.
The best value comes from the cup variety and the duplicate parts. Having 2 cups in each listed size gives you backup pieces and lets you test which cup works best for your common welds.
It is not the best fit if you need a full TIG starter kit or smaller tungsten sizes. In that case, a broader TIG consumable assortment may make more sense.
How It Compares to Alternatives
Compared with basic TIG consumable sets, this 24PC TIG Kit is more focused on a jumbo gas lens setup for 1/8 in / 3.2 mm work. Basic kits may include more tungsten sizes, but they may not give you the same large cup selection.
Compared with premium branded consumables from companies such as CK Worldwide or Weldcraft-style OEM kits, this kit may appeal more to budget-minded welders who want practical parts in one package. Premium options may be better if you need documented OEM fitment, tighter quality control, or a kit matched to a specific torch brand.
Frequently Asked Questions
Is this kit compatible with all TIG torches?
No. It is listed for WP17 and WP26 air-cooled torches and WP18 water-cooled torches. Check your torch model and consumable thread style before ordering.
What tungsten size does this 24PC TIG Kit support?
This kit is built around 1/8 in / 3.2 mm consumables. It includes 1/8 in / 3.2 mm jumbo gas lenses and matching 10N25 collets.
Does a gas lens really improve TIG weld quality?
A gas lens can improve shielding gas flow by reducing turbulence at the cup. That can help with arc consistency and weld cleanliness, but you still need clean metal, correct gas flow, and proper machine settings.
What cup sizes are included?
The kit includes 8 large-diameter alumina ceramic cups. You get 2 each of #6, #8, #10, and #12 cups.
Can beginners use this kit?
Yes, beginners can use it if their torch is compatible and they understand basic TIG torch setup. New users should install one setup at a time and check tungsten fit, cup seating, and gas flow before welding.
Does this kit include tungsten electrodes?
No. The listed components include gas lenses, collets, gas lens insulators, alumina cups, and back caps. You need to supply your own 1/8 in tungsten electrodes.
Who should skip this TIG accessory kit?
Skip it if you use a smaller WP9, WP20, or WP25 torch, or if you mainly weld with smaller tungsten sizes. You should also skip it if you need a complete TIG torch or a full beginner welding package.
The Bottom Line
The 24PC TIG Kit is a practical upgrade for welders who already use a compatible WP17, WP18, or WP26 torch and want a 1/8 in / 3.2 mm jumbo gas lens setup. Its strongest advantage is the mix of gas lenses, alumina cups, collets, insulators, and back caps in one package.
You should skip it if your torch series or tungsten size does not match. With the right setup, the 8.2/10 rating fits because the kit adds real flexibility, but compatibility remains the main buying risk.
