🔧 Practical welding guides, tested in a real garage
MIG & TIG Torch Parts Reviews

48 Pcs Flux Core Gasless Nozzle Tips Review: KP1939-1 Kit

48 pcs flux core nozzle tips kit - product photo

The 48 pcs flux core nozzle tips kit (model KP1939-1) is a spare-parts pack with four gasless nozzles, 40 conductive tips at 0.035 in. and four gas diffusers. The listing names the Lincoln Magnum 100L, Weld-Pak 100HD and Yeswelder 205-DS as compatible. It is worth a look if you run 0.035 in. flux-core wire on one of those guns. Skip it if your gun uses different parts. This review is based on the Amazon listing, not hands-on testing.

48 Pcs Flux Core Nozzle Tips Kit at a Glance

Item Per the listing
Model KP1939-1
Total pieces 48
Nozzles 4 flux core gasless nozzles
Contact tips 40 conductive tips, 0.035 in.
Gas diffusers 4
Listed compatibility Lincoln Magnum 100L, Weld-Pak 100HD, Yeswelder 205-DS
Storage case Not listed as included
Warranty and support terms Not verified; check the listing

Check price on Amazon →

What Is in the Kit and Why It Matters

Contact tips wear fastest, so the 40 tips are the main value. A worn tip causes erratic wire feed, an unstable arc and burnback. The four nozzles and four diffusers cover the other parts that burn or clog over time.

On a gasless flux-core gun, the nozzle is a spatter shield. It does not carry shielding gas, so the nozzle style differs from a gas MIG gun. That is why you should buy parts made for your exact gun.

How to Check Fit Before You Buy

  1. Match the gun. Check that your gun is one of the listed models or uses the same part style.
  2. Match the wire size. The tips are 0.035 in. Use them only with 0.035 in. wire.
  3. Compare the old parts. Check thread, length and nozzle shape against what is on your gun now.
  4. Confirm the diffuser. It must thread onto the gun neck and take the tip.
  5. Plan storage. No case is listed, so use a small parts box to keep tips clean and sorted.

Who This Kit Suits

  • Owners of a compatible flux-core welder who burn through tips on garage, farm or repair jobs.
  • Anyone who wants spares instead of reordering one or two tips at a time.

It is a poor fit for aluminum work, other wire sizes or guns outside the listed models.

Pros and Limitations

Pros

  • Large supply of 0.035 in. tips.
  • Includes nozzles and diffusers, not only tips.
  • Lists three compatible gun models.

Limitations

  • Fit is limited to the listed models and similar parts.
  • No storage case listed.
  • Quality, brand and warranty are not verified here.
  • Forty tips is a lot for an occasional welder.

Check price on Amazon →

Care and Safety

  • Unplug the welder and let the gun cool before swapping parts.
  • Replace a tip as soon as the bore wears oval or wire feeds roughly.
  • Tighten tips and diffusers snugly. Loose parts overheat.
  • Wear a welding helmet, gloves and eye protection, and ventilate flux-core fumes.

Related guides: KP1939-1 MIG welding torch nozzle tips, 24PCS flux core gasless nozzle tips kit and the 14PCS K3493-1 flux core nozzle tips kit.

Check price on Amazon →

Frequently Asked Questions

Which welders does the KP1939-1 kit fit?

The listing names the Lincoln Magnum 100L, Weld-Pak 100HD and Yeswelder 205-DS. Check your gun’s part numbers against the old nozzle, tip and diffuser before ordering.

What is in the 48-piece kit?

Four flux core gasless nozzles, 40 conductive tips at 0.035 in. and four gas diffusers. No storage case is listed.

Can I use these tips with other wire sizes?

No. They are 0.035 in. tips, so use them with 0.035 in. wire. A wrong-size tip causes poor feeding and arc problems.

How often should I replace contact tips?

Replace a tip when the bore wears, the wire feeds unevenly or the arc becomes unstable. Flux-core wire wears tips faster than solid wire, so spares are useful.

Conclusion

The KP1939-1 kit is a spares supply for 0.035 in. flux-core guns. Check your gun model and part style first, and buy a different set if your gun is not on the list.

Check price on Amazon →

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *