As an Amazon Associate I earn from qualifying purchases. Buying through these links costs you nothing extra.
The 17 piece oxy acetylene kit is a medium-duty outfit for welding, brazing, heating and cutting thin to moderate steel. Per the listing, it comes with an oxygen regulator, an acetylene regulator, a torch handle, hose, check valves and small accessories, but it does not include gas cylinders. You need to supply your own oxygen and acetylene tanks, so check the cylinder fittings before you buy.
This page covers what the listing says is in the box, what the fittings mean, the limits to expect and the safety checks to make before lighting a torch.
17 piece oxy acetylene kit at a glance
| Item | Per the listing |
|---|---|
| Kit type | Medium-duty oxy-acetylene outfit for welding, brazing, heating and cutting |
| Oxygen regulator fitting | CGA540 |
| Acetylene regulator fitting | CGA200 (small “MC” size acetylene cylinders) |
| Torch | Medium-duty torch handle |
| Typical contents | Check valves, hose, goggles, tip cleaners, welding rods, lighter, tank key and carry tote; confirm the exact list on the Amazon page |
| Stated capacity | Welding up to 1/2 inch and cutting up to 6 inches with the appropriate nozzles |
| Material | Brass body, nozzles and check valves |
| Gas cylinders | Not included |
The “17 pieces” count appears to include small parts such as tips and rods, so do not expect 17 separate major components. Treat the capacity figures as the seller’s claim; they depend on the tips, cylinder size and your skill.
Who this kit suits
- Hobbyists and garage fabricators who want to learn oxy-fuel welding, brazing and heating on a budget.
- Anyone who needs a portable outfit for bending, heating stuck fasteners or cutting light steel.
- Owners who already have, or can exchange, compatible oxygen and acetylene cylinders.
It is a poor fit if you need heavy industrial cutting, large cylinders with different fittings, or certified equipment for code work.
Check the fittings before you order
- CGA540 is the common oxygen cylinder connection in the US. Check that your oxygen cylinder uses it.
- CGA200 is a small-cylinder acetylene fitting. Larger acetylene cylinders commonly use a different connection (often CGA510), so check your cylinder valve before buying.
- Confirm the torch handle accepts the tips you plan to use for welding and cutting.
- Look for flashback arrestors. Check valves stop reverse flow but are not the same as flashback arrestors, and many shops add arrestors for safety.
Setup and safety checklist
- Secure cylinders upright, with the valve caps on when moving them.
- Never run acetylene above 15 psi. Higher pressure can make acetylene unstable.
- Keep oil and grease away from oxygen fittings and regulators.
- Leak-test every connection with soapy water before lighting.
- Wear proper welding goggles or a face shield, gloves and cotton or wool clothing, and work in a ventilated area away from flammables.
- Light the torch with a spark lighter, never a gas lighter or match, and follow the shut-down order in your manual.
For pressure starting points by tip size, see our oxy-acetylene pressure settings chart.
Pros and limitations
Pros
- All-in-one starter outfit with regulators, torch, hose and basic accessories.
- Brass components are standard for oxy-fuel use.
- A tote makes it easier to store and carry.
Limitations
- No gas cylinders are included.
- Medium-duty torch and consumer-grade regulators, so it is not for heavy daily production use.
- Cutting and welding capacity claims depend on the tips and gas supply.
- Check valves alone are not full flashback protection.
- Aluminum is not a practical use for this kit.
Alternatives and related guides
Compare other outfits, such as the Hobart medium-duty kit in our Hobart 770502 oxy-acetylene kit review. If you mostly cut metal, read how plasma compares in plasma vs oxy-acetylene cutting.
Related oxy-fuel reading: how to adjust an oxy-fuel welding torch | oxygen cylinder storage requirements
Frequently Asked Questions
What is included in the 17 piece oxy acetylene kit?
Per the listing, the kit has an oxygen regulator, an acetylene regulator, a medium-duty torch handle, hose, check valves, goggles, tip cleaners and other small accessories. The exact contents can vary by seller, so read the current Amazon listing before ordering.
Does the kit come with oxygen and acetylene tanks?
No. The listing describes it as a kit without tanks. You need to buy or exchange your own cylinders and make sure the regulator fittings match the cylinder valves.
How thick can it weld or cut?
The listing claims welding up to 1/2 inch and cutting up to 6 inches with the appropriate nozzles. In practice, results depend on the tip size, gas pressure, cylinder capacity and technique, so treat these as maximum claims rather than everyday performance.
What pressure should I set for acetylene?
Follow the tip chart for your torch, and never run acetylene above 15 psi. Oxygen pressure depends on the tip and the job. Check the manual and a pressure chart.
Do I need flashback arrestors with this kit?
Check valves are included per the listing, but they are not the same device as flashback arrestors. Adding arrestors at the regulators or torch is widely recommended for safety, and some workplaces require them.
Is this kit suitable for beginners?
It can be, if you take a safety course or learn from an experienced welder first. Oxy-fuel equipment involves compressed gases and open flame, so practice on scrap steel in a safe, ventilated area.
Conclusion
This 17 piece oxy acetylene kit is a budget starter outfit for light welding, brazing, heating and cutting, as long as you accept its medium-duty limits and supply your own cylinders. Verify the CGA fittings, add flashback protection, and confirm the contents on the listing before you order.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What is included in the 17 piece oxy acetylene kit?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Per the listing, the kit has an oxygen regulator, an acetylene regulator, a medium-duty torch handle, hose, check valves, goggles, tip cleaners and other small accessories. The exact contents can vary by seller, so read the current Amazon listing before ordering.”}},{“@type”:”Question”,”name”:”Does the kit come with oxygen and acetylene tanks?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”No. The listing describes it as a kit without tanks. You need to buy or exchange your own cylinders and make sure the regulator fittings match the cylinder valves.”}},{“@type”:”Question”,”name”:”How thick can it weld or cut?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The listing claims welding up to 1/2 inch and cutting up to 6 inches with the appropriate nozzles. In practice, results depend on the tip size, gas pressure, cylinder capacity and technique, so treat these as maximum claims rather than everyday performance.”}},{“@type”:”Question”,”name”:”What pressure should I set for acetylene?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Follow the tip chart for your torch, and never run acetylene above 15 psi. Oxygen pressure depends on the tip and the job. Check the manual and a pressure chart.”}},{“@type”:”Question”,”name”:”Do I need flashback arrestors with this kit?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Check valves are included per the listing, but they are not the same device as flashback arrestors. Adding arrestors at the regulators or torch is widely recommended for safety, and some workplaces require them.”}},{“@type”:”Question”,”name”:”Is this kit suitable for beginners?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It can be, if you take a safety course or learn from an experienced welder first. Oxy-fuel equipment involves compressed gases and open flame, so practice on scrap steel in a safe, ventilated area.”}}]}
