As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The Preciva 852D++ is a 2-in-1 rework station that pairs a soldering iron with a hot air gun, each with its own digital temperature display. This Preciva 852D review is based on the Amazon listing, not hands-on testing. It is worth considering if you repair circuit boards and want both through-hole soldering and SMD hot-air rework in one unit; skip it if you only need a basic iron.
Quick specs at a glance
| Item | Per the listing |
|---|---|
| Type | Soldering iron plus hot air rework station |
| Displays | Dual digital displays |
| Temperature range | 212–932°F (100–500°C), adjustable |
| Control | PID temperature control, adjustable airflow |
| Hot air nozzles | 8 mm, 10 mm, 13 mm |
| Iron tips | 5 tips (I, B, K, 3.2D, 3C) |
| Also included | Iron holder, brass wool, screwdriver, 30 g lead-free solder, desoldering pump, tweezers |
Check the listing for exact power, voltage and which accessories ship in your version.
Check current price on Amazon →
What it is and who it suits
A 2-in-1 station replaces two separate tools on a small bench. The iron handles through-hole parts, wires and connectors, while the hot air gun heats a whole SMD package at once, which is how you lift or place chips, small ICs and connectors with many pins.
It suits electronics hobbyists, phone and console repair, and makers who want a first rework station. It is more than a casual user needs for the occasional wire, and it is not a replacement for a specialist infrared or precision BGA rework setup.
How to check it fits your needs
- Hot air temperature: the listed 212–932°F range covers typical rework. Leaded and lead-free solder, plus heat-sensitive plastics, need different settings.
- Nozzle size: match the 8, 10 or 13 mm nozzle to the part so the airflow stays on the package and not on nearby parts.
- Tip shapes: the listed I, B, K, 3.2D and 3C shapes cover fine points, chisels and knife tips. Confirm the tip series if you want spares.
- Ventilation and fumes: hot air blows flux smoke and can be irritating; plan on a fume extractor.
- Space and power: it is a bench station with a base unit, so check footprint and plug type for your region.
Pros and limitations
| Pros | Limitations |
|---|---|
| Iron and hot air in one unit | Bigger and costlier than a single pencil iron |
| Independent temperature settings | Learning curve with hot air; easy to overheat boards |
| Dual digital displays and PID control | Not a precision BGA or lab rework system |
| Starter accessories included | Accessory quality is basic; you may want better flux and tips |
Check current price on Amazon →
Using hot air rework safely
- Preheat the board gently and use the lowest temperature and airflow that gets the job done.
- Keep the nozzle moving and a few centimeters from the part to avoid melting nearby plastic or lifting pads.
- Remove or shield small parts, such as light capacitors, that can blow away with the airflow.
- Use flux, a heat-resistant mat and eye protection. Our heat mat review covers one shield option.
- Let the hot air gun cool in its holder before storing, as the system relies on a standby or sleep mode when idle.
- Ventilate. See the solder fume extractor review for a bench option.
Alternatives and related guides
- KSGER T12 soldering station if you only need an iron and want fast tip heating.
- Hicello soldering iron kit for a basic starter kit.
- 1600W hot air welder for plastic work, a different use of hot air.
Frequently Asked Questions
What is the Preciva 852D++ used for?
It combines a soldering iron and a hot air gun in one station for through-hole soldering, desoldering and surface-mount rework. It is commonly used on circuit boards, phones and consoles, with the hot air side used to lift or place SMD parts.
What is the temperature range of the 852D++?
The listing gives an adjustable range of 212 to 932°F (100 to 500°C). Both the iron and the hot air gun have their own displays, so confirm each function’s range on the product page and set it for the solder you use.
Can beginners use a hot air rework station?
Yes, but practice on scrap boards first. Hot air can overheat components and lift pads if the temperature or airflow is too high. Use flux, the correct nozzle and low airflow to avoid blowing small parts away.
Does it come with solder and nozzles?
The listing describes three nozzles, five iron tips, a brass wool cleaner, a desoldering pump, tweezers and a small roll of lead-free solder. Check the current listing, since kit contents can differ between versions.
Conclusion
The Preciva 852D++ is aimed at hobbyists who want a soldering iron and SMD hot air rework in one bench station. Check the voltage, nozzle sizes and accessories, and learn hot air settings carefully before working on a valuable board.
Check current price on Amazon →
