As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The Zonon Point-2-Point measuring tool is a flat, laser-cut stainless steel layout tool that the listing says finds centers between 3.3 and 24 inches using a 7-point locator. It is worth considering if you do repeat layout for fabrication, woodworking or metal projects and want a quick way to mark centers or spacing. Skip it if you need a calibrated, certified measuring instrument.
Quick specs at a glance
| Item | Detail |
|---|---|
| Product | Zonon Point-2-Point measuring tool |
| Listed range | 3.3 to 24 inches, per the listing |
| Feature | 7-point locator for finding centers, per the listing |
| Material | Laser-cut stainless steel |
| Use | Layout and center finding for welding, metalwork and woodworking |
| Not a | Calibrated measuring instrument or substitute for a rule or square |
Specs are from the seller listing. Check the listing photos and instructions for the exact way the tool is used.
Check the current price on Amazon →
What it is and who it suits
Layout tools like this speed up marking out parts before cutting or welding. Instead of measuring and calculating a center each time, you use the tool’s reference points to find the middle or equal spacing, then mark it.
It is aimed at hobby and small-shop users who mark centers on bar, plate or boards, lay out hole patterns, or position parts on a fixture. Tools of this type are convenient, but they are only as accurate as your marking and your reading of them.
How to check it fits your work
- Range: your work must fall within roughly 3.3 to 24 inches.
- Material: check how the tool references an edge or surface, and whether it suits your stock.
- Accuracy needs: for tight tolerances, verify results with a steel rule, calipers or a square.
- Marking tool: pair it with a scriber or fine marker so you transfer the center accurately.
- Learning curve: read the instructions or listing images first, as the method may not be obvious.
Check the current price on Amazon →
Pros and limitations
Pros
- Speeds up repeated center finding.
- Stainless steel resists rust in a shop environment.
- Slim and easy to store.
- Useful across welding, woodworking and general layout.
Limitations
- Fixed range, so it will not cover very small or large work.
- Not a calibrated instrument, so confirm important dimensions.
- Does not suit curved or irregular surfaces well.
- Accuracy depends on how carefully you mark.
Using it for layout
- Clean the surface and edge so the tool seats flat.
- Place the tool as shown in the listing instructions and read the centers with the locator points.
- Mark with a fine scriber or punch and double-check with a rule.
- Repeat on the second edge and confirm the intersection for a center mark.
Wipe the tool after use to keep oil and grinding dust off it, and store it flat. Always deburr cut edges before you handle stock.
Alternatives and related guides
- double-pointed scriber: for marking the centers you find
- Ally Tools fillet gauge set: for checking weld size after layout
- welding table clamps: to hold parts after you mark them
- V-type magnetic welding clamps: to hold angles while you tack
Frequently Asked Questions
What does a point-to-point measuring tool do?
It helps you find centers and mark reference points on stock without repeated measuring and math. You place the tool against your material, read its reference points and mark the spot. It speeds up repeat layout but does not replace a rule.
How accurate is it?
The listing does not give a stated tolerance, so treat it as a layout aid. Accuracy depends on how well you seat and read it. For critical dimensions, confirm with calipers, a steel rule or a square before cutting or welding.
Can I use it on round bar or pipe?
The listing describes use on flat work, and curved surfaces may reduce accuracy. For round stock, a center-finding square or dedicated pipe tools are more reliable. Test on scrap if you plan to use it on round parts.
Is stainless steel important for a layout tool?
Stainless resists rust, which helps in humid shops and around coolants. It does not make the tool more accurate, so check for burrs and bends. Keep it clean and store flat to protect the edges.
Final verdict
The Zonon Point-2-Point tool is a handy layout helper for quickly finding centers in the 3.3 to 24 inch range. It is not a precision instrument, so check key dimensions. Check the current listing for details.
Check the current price on Amazon →
