As an Amazon Associate, Garage Welding may earn from qualifying purchases. This does not change the price you pay.
The Dormont 16100BP48 is a 1 inch by 48 inch stainless-steel braided gas connector for commercial gas appliances, not a welding or torch hose. It is worth considering if you are replacing the flexible connector on a movable shop or kitchen gas appliance, and it is the wrong part for oxygen, acetylene or any oxy-fuel setup. This Dormont 16100BP48 gas hose review is based on the Amazon listing and retailer spec pages, not hands-on testing.
Dormont 16100BP48 at a glance
| Item | What the listing and retailers say |
|---|---|
| Type | Commercial moveable gas appliance connector |
| Size | 1 in inside diameter, 48 in long |
| Construction | 304 stainless steel braid over a flexible core, with a blue antimicrobial cover |
| Fittings | Swiveling ends; confirm the exact thread and flare sizes |
| Gas | Natural gas or LP appliance service (verify) |
Specs are summarized from public product listings. Always compare them with your appliance’s manual and the data on the connector’s tag.
Check the current price on Amazon →
What it is and who it suits
A flexible gas connector lets an appliance move slightly without stressing rigid gas pipe. A 1 inch connector at this length is sized for higher-demand commercial equipment such as fryers, ranges and large heaters, not small household appliances.
It suits shops and kitchens replacing a worn connector on a movable appliance. If you are actually looking for torch hoses, read the 1/4 x 50 ft twin welding hose review instead.
How to check it fits your appliance
- Match the gas. Check that the connector is approved for natural gas or LP gas and that it matches your appliance’s fuel.
- Match the size. The inside diameter and BTU capacity must meet the appliance’s input rating. Compare the capacity on the connector’s tag with the appliance data plate.
- Match the fittings. Check the thread type, size and flare design on the gas line and on the appliance.
- Check length. Choose a length that does not kink, stretch or twist when the appliance is moved.
- Look for the restraint. Moveable appliances typically need a restraining cable or other device, and many installs include a quick-disconnect valve.
Pros and limitations
Pros
- Stainless steel braid is the standard for flexible gas connectors.
- 1 inch bore supports large commercial appliances.
- Swiveling ends help with alignment during installation.
Limitations
- Not suited to oxygen, acetylene or welding torches.
- The cover has a limited temperature rating, so keep it away from hot surfaces and flame.
- Installation may require a licensed professional and a permit.
- It is oversized for small appliances.
Installation and safety tips
- Shut off the gas supply before disconnecting an old connector.
- Inspect the new connector for kinks, cuts or damage and do not bend it sharply.
- Use thread sealant rated for gas on tapered threads only, never on flare seats.
- Tighten with two wrenches so you do not twist the pipe or the connector.
- Check each joint with soapy water after turning the gas on. Do not test with a flame.
- Replace the connector when moving the appliance if the manufacturer or code requires a new one, and check it often for corrosion or damage.
- If you smell gas, leave the area and call the gas utility or emergency services.
Alternatives and related guides
- Robertshaw gas valve if your issue is a gas control valve rather than a connector.
- 1/4 x 50 ft twin welding hose for oxy-fuel torch hose needs.
- Weldmark hose repair kit for welding hose repair parts.
See this connector on Amazon →
Frequently Asked Questions
Can I use the Dormont 16100BP48 as a welding or torch hose?
No. It is a commercial gas appliance connector for natural gas or LP service, not an oxygen or acetylene torch hose. Do not use it for oxy-fuel equipment, and use proper welding hose with correct fittings for cutting and welding torches.
What size is the Dormont 16100BP48?
Retail pages describe it as a 1 inch inside-diameter, 48 inch long stainless steel braided connector with a blue antimicrobial cover. Confirm the end fittings and listed gas capacity on the live listing against your appliance and gas line.
Is it for moveable appliances?
It is sold as a moveable-grade commercial connector, which suits appliances on casters that are moved for cleaning. It is typically installed with a restraining device and, in many cases, a quick-disconnect valve. Follow the installation instructions and local codes.
Can I install a gas connector myself?
Rules vary. Many jurisdictions require a licensed gas fitter, or a permit and inspection, for gas appliance connections. Even if you may do it yourself, leak test every joint with soapy solution and check the appliance and local code requirements first.
Conclusion
The Dormont 16100BP48 is a heavy-duty appliance gas connector, not a welding accessory. Verify the gas type, size, capacity and fittings, install it with the right restraint, and have a qualified person do the work where required.
Check the latest price on Amazon →
