Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Cleaning slag and spatter after welding can slow you down if your hammer feels too light, vibrates too much, or lacks a useful chisel edge. The All About Steel 28 oz Welding Chipping Hammer with Brush is built for weld cleanup, surface prep, and general shop use with a pointed tip, flat chisel end, and included welding brush. This review helps you decide whether its 28 oz weight, alloy steel head, rubber handle, and brush combo make sense for your workbench. It is a strong fit for welders who want a heavier chipping hammer, but it may feel like more tool than you need for very light hobby projects.
Quick Verdict
Rating: 8.4/10
Best For: Welders, metalworkers, and DIY users who need a heavier slag hammer with a separate wire brush included.
Bottom Line: The All About Steel 28 oz Welding Chipping Hammer is a practical cleanup tool with a useful dual-end head, textured rubber handle, and included brush. The main tradeoff is weight, since the 28 oz design gives stronger impact but may feel heavy for small, quick jobs.
| Specification | Detail |
|---|---|
| Brand | All About Steel |
| Model | WH-991 |
| Product type | Welding chipping hammer with wire brush |
| Weight | 28 oz listed product weight, 1.73 lb item weight |
| Dimensions | 12.6 in long x 7.68 in wide x 0.74 in thick |
| Head material | Alloy steel, with heat-treated steel construction described by the listing |
| Handle material | Rubber handle with textured grip |
| Design | Pointed tip and flat chisel end for slag removal and scraping |
| Included accessory | Welding brush |
| Number of items | 1 |
| Color | Silver |
| Batteries | No batteries required |
| Best use | Removing welding slag and spatter, light surface cleanup, and weld-prep brushing |
What Is the All About Steel 28 oz Welding Chipping Hammer?
The All About Steel 28 oz Welding Chipping Hammer is a manual slag removal tool for weld cleanup and metal surface preparation. It uses a pointed tip for targeted chipping and a flat chisel end for scraping wider areas after welding.
The listing identifies the product as model WH-991 and includes a welding brush, so you get both impact chipping and brushing in one purchase. That matters because slag removal often takes more than one motion: you chip the hard slag first, then brush away residue and loose debris.
The hammer is best for stick welding cleanup, general fabrication work, shop maintenance, and DIY metal projects. It is not a precision finishing tool, and it should not replace proper grinding, wire wheeling, or surface preparation when your weld needs a cleaner final finish.
Before You Buy: The 28 oz weight gives this hammer strong striking power, but it may feel heavy if you only need a light chipping hammer for occasional small welds.
Who Should Buy It?
Best For
- Stick welders who regularly remove slag after welding passes.
- DIY metalworkers who want a chipping hammer and brush in one kit.
- Shop users who prefer a heavier hammer for firm, controlled strikes.
Skip If
- You want the lightest possible hammer for short, occasional cleanup.
- You need a specialty tool for fine finishing or grinding instead of slag chipping.
- You prefer a wood-handle hammer rather than a rubber-handled design.
Features and Benefits
28 oz Weight and Balance
The 28 oz weight is the main reason to consider this hammer. A heavier head can break slag with fewer strikes, which helps when you work on thicker welds or clean up repeated passes.
The tradeoff is hand fatigue. If you use it for long cleanup sessions, the extra weight may tire your wrist faster than a 10 oz or 14 oz chipping hammer. For many shop users, that weight is still a fair exchange for stronger impact.
Pointed Tip and Flat Chisel End
The pointed tip helps you reach slag in narrow lines, corners, and tighter spots around a bead. The flat chisel end gives you a wider edge for scraping loose slag, weld spatter, and surface debris.
This two-end design makes the hammer more useful than a basic shop hammer. You can start with the point for stubborn slag, then use the flat end to clear broader areas before brushing.
Heat-Treated Steel Construction
The listing describes the hammer as made with heat-treated steel construction, and the specification table lists an alloy steel head. That combination supports durability for repeated striking against slag and metal surfaces.
You should still inspect the head and handle regularly. Any chipping tool can wear over time, especially if it is used against hard edges, sharp corners, or dirty surfaces.
Rubber Handle and Textured Grip
The handle uses rubber material with a textured grip. This helps your hand stay more secure than a smooth handle, especially when you wear gloves or work in a dusty shop.
The article-supported spring-handle design is meant to reduce vibration during repeated strikes. That does not remove all shock, but it can make cleanup more comfortable than using a rigid, smooth handle.
Included Welding Brush
The included welding brush is useful because weld cleanup usually needs both chipping and brushing. After you break away slag with the hammer, the brush can remove smaller debris from the bead and surrounding surface.
This is especially helpful for basic stick welding cleanup. For heavy rust, mill scale, paint removal, or final finish work, you may still need a grinder, wire wheel, flap disc, or dedicated surface prep tool.
Performance and Usability
The All About Steel 28 oz Welding Chipping Hammer performs best when you need firm impact, simple control, and fast slag removal. The pointed tip targets hard slag, while the flat chisel end handles wider cleanup passes.
The textured rubber handle improves grip, and the heavier head helps the tool do more of the work. You still need proper technique, because striking too hard at the wrong angle can damage the work surface or send debris into the air.
| Feature | What It Does | Buyer Benefit |
|---|---|---|
| 28 oz head | Adds striking force | Helps chip slag with fewer hits |
| Pointed tip | Reaches narrow slag lines | Useful around bead edges and tight spots |
| Flat chisel end | Scrapes broader areas | Speeds up general weld cleanup |
| Rubber handle | Adds grip and comfort | Helps reduce slipping during use |
| Included brush | Clears loose debris | Completes the basic chip-and-brush workflow |
How It Performs in Real Use
For Stick Welding Cleanup
This hammer makes the most sense for stick welding because slag removal is part of the normal workflow. The pointed tip can break up stubborn slag along the bead, and the flat chisel end helps clean larger sections faster.
For Garage and DIY Welding Projects
For home shop projects, the hammer and brush combo keeps your cleanup simple. You can use the hammer after welding brackets, frames, repairs, or small fabrication pieces, then use the brush before inspecting the bead.
For Repeated Shop Use
The alloy steel head and heat-treated construction support repeated striking during regular use. The heavier head also helps when you work through several welds in a session, but you should take breaks if your wrist or grip starts to tire.
For Surface Prep and Touch-Up Cleaning
The wire brush can help remove loose residue before or after chipping. It is useful for light cleanup, but it is not a replacement for proper grinding, sanding, or rust removal when the surface needs a cleaner finish.
Pro Tip: Use short, controlled strikes at a shallow angle instead of swinging hard straight down. You will remove slag with better control and reduce the chance of marking the workpiece.
How to Use It Correctly
Let the weld area cool enough to work safely, then put on eye protection, gloves, and appropriate shop gear. Slag and metal chips can fly when you strike the surface, so never use a chipping hammer without protecting your eyes.
Start with the pointed tip on stubborn slag and work along the bead in controlled taps. Use the flat chisel end for wider cleanup, then finish with the included brush to clear loose particles from the weld area.
Do not use the hammer as a pry bar, general demolition tool, or substitute for a grinder. It is designed for chipping and cleaning, and misuse can damage the head, handle, or workpiece.
Safety and Maintenance Notes
This tool is simple, but safe use still matters. Always wear safety glasses or a face shield, use welding gloves, and keep your free hand away from the strike path.
Inspect the hammer before use. Stop using it if the head, handle, or chisel edge shows cracking, looseness, or severe damage. After use, brush off debris and store the hammer in a dry place to help reduce corrosion.
The included brush is a cleanup accessory, not a protective tool. If you are working around hot metal, sharp edges, coatings, or unknown materials, follow safe shop procedures and use the correct protective equipment.
Pros and Cons
Pros
- 28 oz weight gives stronger impact for slag removal.
- Pointed tip and flat chisel end support different cleanup tasks.
- Alloy steel head and heat-treated construction support durability.
- Rubber textured handle helps with grip and comfort.
- Included welding brush adds value for basic chip-and-brush cleanup.
Cons
- May feel heavy for users who prefer a lighter chipping hammer.
- Not a replacement for grinding, sanding, or detailed surface finishing.
- Warranty terms are not clearly stated in the article, so you should check the product page before buying.
Is It Worth the Price?
The All About Steel 28 oz Welding Chipping Hammer is worth considering if you want a straightforward welding cleanup tool with both a hammer and brush included. Its value comes from the heavier 28 oz design, dual-end head, textured rubber handle, and included welding brush.
It fits the practical, everyday-use category rather than the premium specialty-tool category. You get the most value if you regularly chip slag after stick welding or need a reliable shop hammer for repeated cleanup tasks.
It is not the best fit if you want a very lightweight hammer or a tool for final cosmetic finishing. In that case, compare lighter slag hammers or dedicated surface prep tools before you buy.
How It Compares to Alternatives
Compared with lighter welding hammers from brands such as Hobart, Vaughan, Mutt Tools, or Klein Tools, this All About Steel hammer stands out mainly for its 28 oz weight and included brush. Lighter options may feel easier for short jobs, but they may not hit as hard when slag is stubborn.
Compared with similar 28 oz alternatives from brands such as YESWELDER or VASTOOLS, this model is most appealing if you want the verified All About Steel WH-991 listing details, rubber handle, alloy steel head, and brush combo. The right choice depends on your preferred handle style, weight, and whether you want a bundled brush.
Frequently Asked Questions
Is the All About Steel 28 oz Welding Chipping Hammer good for beginners?
Yes, beginners can use it for basic slag removal and weld cleanup. The main thing to remember is that the 28 oz weight may feel heavy at first, so use controlled taps instead of hard swings.
What is the hammer used for?
It is mainly used to chip welding slag, remove spatter, scrape residue, and brush loose debris from weld areas. It is most useful after stick welding, but it can also help with general metal cleanup.
Does it include a wire brush?
Yes, the product listing identifies a welding brush as an included component. The brush is useful for clearing loose slag and debris after you chip the weld area.
Is 28 oz too heavy for a chipping hammer?
It depends on your work. A 28 oz hammer gives stronger impact for slag removal, but users who prefer quick, light cleanup may find a smaller 10 oz or 14 oz hammer easier to handle.
Can you use it on different metals?
You can use it for cleanup on many welded metal projects, but you should match your technique to the material and surface finish. Use lighter strikes on thinner or softer material to avoid dents or surface damage.
How should you maintain this chipping hammer?
After use, remove dust and debris, wipe the tool dry, and store it away from moisture. Check the head and handle for cracks, looseness, or heavy wear before each use.
What safety gear should you use with it?
Wear safety glasses or a face shield, welding gloves, and suitable work clothing. Slag and metal chips can fly when struck, so eye protection is not optional.
Who should skip this hammer?
Skip it if you want the lightest tool possible or need a finishing tool rather than a chipping hammer. You should also compare alternatives if you strongly prefer a wood handle or a specific brand used in your shop.
The Bottom Line
The All About Steel 28 oz Welding Chipping Hammer with Brush is a good pick if you want a heavier slag hammer with a pointed tip, flat chisel end, textured rubber handle, and included welding brush. It is best for welders and DIY metalworkers who value impact strength and simple cleanup, while lighter-use buyers may prefer a smaller hammer.
Its main strength is practical weld cleanup power in a simple tool. Its main limitation is the heavier 28 oz feel, so choose it if you want firm strikes rather than the lightest possible hammer.
