As an Amazon Associate I earn from qualifying purchases. Buying through these links costs you nothing extra.
Kraken Bond Anti Spatter Spray is an aerosol you apply before MIG welding so spatter is easier to wipe or chip off. This Kraken Bond anti spatter spray review covers what the listing says, how to use it, and where it falls short, so you can decide if it fits your shop.
Quick answer: It is a reasonable spray-on option if you do a lot of MIG or flux-core work and are tired of grinding spatter off parts and nozzles. It will not fix poor settings, and it is not a substitute for correct wire speed, voltage and gas. The listing describes a 2 x 12 oz aerosol pack, so confirm the current pack size and price before ordering.
Kraken Bond Anti Spatter Spray at a Glance
| Item | Detail (per the listing) |
|---|---|
| Product | Kraken Bond Anti Spatter Spray |
| Pack | 2 x 12 oz aerosol cans |
| Intended use | Reducing spatter adhesion on workpieces and tools during welding |
| Best for | MIG and flux-core jobs where spatter cleanup takes the most time |
| Check before buying | Current price, pack size, and the safety data sheet (SDS) on the label or listing |
| Buy | Check price on Amazon |
What It Does and Where It Helps
Anti-spatter spray leaves a thin film on the metal so droplets of spatter do not fuse to the surface as firmly. That means less time with a chipping hammer, wire wheel or flap disc afterward. It is most useful around joints, fixtures, and welding tables, and on parts you plan to paint or coat later.
TIG welding produces little spatter to begin with, so the benefit there is small. For TIG, careful prep and a clean tungsten matter far more than a spray.
For a plain-language overview of how these products work, see our guide to anti-spatter spray for welding.
How to Use Anti Spatter Spray
- Clean the metal first. Remove oil, mill scale, and loose rust where you will weld.
- Shake the can well, then spray a light, even coat from the distance shown on the label.
- Let the solvent flash off before you strike an arc. Do not weld on wet or dripping surfaces.
- Weld as usual, with good ventilation and fume extraction.
- Wipe or chip spatter off after the part cools, and reapply when the coating wears.
Safety and Limits
- Flammability: Many aerosol anti-spatter products use flammable solvents or propellants. Follow the can’s warnings and let the coating dry before welding. Read the SDS.
- Silicone: Some anti-spatter products contain silicone, which can cause trouble with paint, powder coat, or later welding. Check the label if you plan to finish the part.
- Not a settings fix: Excess spatter usually points to wire feed, voltage, gas, or technique. See why your weld spatter is so bad.
- Reapplication: The coating wears off during use, so plan on touching up longer jobs.
Pros and Limitations
Pros
- Spray format covers fixtures, tables and large parts quickly
- Two-can pack per the listing
- Can reduce cleanup time on spatter-heavy MIG work
Limitations
- Needs reapplication and careful ventilation
- Not hands-on tested for this review; performance claims come from the listing
- May not suit parts that must be painted or powder coated until you confirm the formula
Alternatives to Consider
If you prefer a different formula, compare Stanley AP90 anti spatter spray and WEICON anti-spatter spray. For nozzle protection specifically, a gel is another option, covered in anti-spatter nozzle gel.
Frequently Asked Questions
Is Kraken Bond anti spatter spray good for MIG welding?
It is designed for that kind of work, and MIG is where anti-spatter sprays help most. Results depend on your settings and prep, so treat it as a cleanup aid rather than a fix for bad technique.
Can I use it for TIG welding?
The listing mentions TIG, but TIG makes very little spatter. You will see the biggest benefit with MIG and flux-core welding.
Can I paint after using anti spatter spray?
Clean the surface before painting or coating, and check the label for whether the formula contains silicone. Wipe the part down with a suitable cleaner first.
Is anti spatter spray flammable?
Aerosol products can be flammable when wet. Keep it away from ignition sources, let it dry before welding, and read the can label and SDS.
Conclusion
Kraken Bond Anti Spatter Spray is a practical cleanup aid for MIG-heavy work, but verify the pack size, price and safety data on the listing before you buy. Check price on Amazon
Related guides: anti-spatter spray for welding | Stanley AP90 anti spatter spray | WEICON anti-spatter spray | anti spatter welding spray review
