The Anlseiod flux core nozzle tips kit is a 14-piece set of .035-inch copper tips, gasless nozzles and brass diffusers for budget flux-core welders. Per the Amazon listing it is model K3493-1 and lists fit for Century, Forney, Titanium, Lincoln, Craftsman and Chicago Electric machines. Confirm your gun uses the same parts before ordering. The Anlseiod 14PCS flux core nozzle tips kit supplies gasless nozzles and contact tips.
Quick Verdict
- Best for: DIY and light-shop owners with a compatible gasless flux-core welder who want spares on hand.
- Skip it if: you need OEM-only consumables, a gas-shielded MIG nozzle or a different tip size.
- Check first: tip size, diffuser style and nozzle shape.
Anlseiod Flux Core Nozzle Tips Kit Specifications
| Specification | Per the listing |
|---|---|
| Brand | Anlseiod |
| Product | 14PCS flux core gasless nozzle tips kit, K3493-1 |
| Count | 14 pieces |
| Tip size | .035 inch (about 0.9 mm) |
| Parts | Copper contact tips, gasless nozzles, brass diffusers or connectors |
| Listed fit | Century FC90 and 80GL, Forney Easy Weld, Titanium Easy Flux, Lincoln, Craftsman, Chicago Electric and similar |
The exact split of nozzles and tips is not clearly stated in the listing text, so check the live page.
What the Parts Do
Copper tips carry the current into the wire. Brass diffusers hold the tip in position. The nozzle shields the front of the gun from spatter. All three wear, so a mixed kit saves repeat orders.
Fit and Compatibility
The listing targets entry-level flux-core welders, but variants of the same brand can use different thread or nozzle shapes. Compare your existing parts, not just the brand name. Our MIG contact tip size chart explains how to match tip to wire.
Tip Size and Wire Matching
The tips are .035 inch, about 0.9 mm, so they suit .035-inch flux-core wire. Using a larger wire in a smaller tip jams the feed. A tip that is too big for the wire gives poor contact and a wandering arc.
Who Should Buy It
- DIY welders on a compatible gasless machine
- Light-workshop owners who service several budget welders
- Anyone who wants spare .035-inch tips close by
Who Should Skip It
- Gas-shielded MIG users with different nozzle styles
- Buyers who need OEM parts for warranty reasons
- Anyone who cannot confirm their gun type
Installing and Maintaining the Parts
- Unplug the welder and let the gun cool.
- Unscrew the nozzle, remove the old tip and install the new tip firmly into the diffuser.
- Refit the nozzle and trim the wire.
- Clean the nozzle after each session. See How to Clean MIG Contact Tips.
If wire will not feed after a change, read Why Is My Welder Not Feeding Wire?.
Pros and Cons
Pros
- Several consumable types in one set
- Common .035-inch size
- Wide fit list in the listing
Cons
- Generic fit still needs checking
- Not OEM, so no documented part numbers
- Contents split not clearly stated
Is It Worth the Price?
It is a reasonable spare-parts buy for a compatible machine. If you want a kit that clearly lists the nozzle and diffuser counts, see our K3493-1 flux core nozzle tips kit review.
Final Verdict
The Anlseiod kit is a practical spares set for compatible gasless welders. Match the tip size and gun style first.
Frequently Asked Questions
What size are the contact tips?
The listing gives .035 inch, about 0.9 mm, for flux-core wire of that size.
Which welders does the Anlseiod kit fit?
The listing names Century FC90 and 80GL, Forney Easy Weld, Titanium Easy Flux, Lincoln, Craftsman and Chicago Electric. Compare your own parts to confirm.
Is this an OEM kit?
No. It is a generic replacement set, so check dimensions rather than relying on the brand match.
Can I use it with shielding gas?
It is made for gasless flux-core setups. Gas MIG guns often need other nozzles.
How often should I change a contact tip?
When the bore wears out of round, wire feeds poorly or the wire fuses to the tip.
Why is spatter sticking to my nozzle?
Flux-core wire makes more spatter. Clean the nozzle regularly and replace it when it is badly damaged.