🔧 Practical welding guides, tested in a real garage
MIG & TIG Torch Parts Reviews

770791 Electrode & 770796 Tip Review: XT30R Fit Guide

770791 electrode and 770796 tip for Hobart XT30R plasma torch

The 770791 electrode and 770796 tip are plasma torch consumables for Hobart’s XT30R torch, used on the Airforce 27i plasma cutter. Hobart lists 770791 for the XT12R, XT30R and XT40R torches and 770796 for the XT30R only, so confirm your torch before you buy. The 770791 electrode 770796 tip set restocks plasma consumables for the XT30R torch.

This review covers fit, what to check on the Amazon listing and when to replace the parts. It is based on Hobart’s product pages and the listing, and these parts were not hands-on tested.

770791 Electrode and 770796 Tip: Quick Specs

Item Detail
770791 Electrode kit; Hobart lists it for XT12R, XT30R and XT40R torches (two electrodes in the OEM kit)
770796 Tips kit for the XT30R torch (two tips in the OEM kit)
Machine Airforce 27i (Hobart lists cutting up to 3/8 in steel); the 770791 electrode is also listed for the 12i and 40i torches
Process Air plasma cutting
Amazon listing Check the pack count and whether the parts are OEM or aftermarket, because the listing wording decides what you receive

Check price on Amazon

Who Should Buy These Parts

Buy them if you run an Airforce 27i with the XT30R torch and your current electrode or tip is worn. They are not a general-purpose plasma consumable: other Hobart torches, and other brands, use different parts.

Compatibility Checklist for the 770791 Electrode

  1. Confirm the torch model printed on the torch or in the manual (XT30R, XT40R or XT12R).
  2. Match the tip to the torch: 770796 is listed for the XT30R only.
  3. Check the amperage range on the tip and the machine’s output.
  4. Compare the pack count and the OEM/aftermarket wording on the Amazon listing.
  5. Keep the shield cup and swirl ring in good condition, since worn parts shorten consumable life.

When to Replace the Electrode and Tip

  • The electrode insert is pitted or the pit is deep.
  • The tip orifice is enlarged or oval.
  • The arc is hard to start or wanders.
  • Cuts show more dross, a bevelled edge or a ragged kerf.

Moisture and oil in the air supply shorten consumable life, so use clean, dry air. Replace the electrode and tip as a pair when the tip is damaged.

Pros and Limits

  • Pro: straightforward replacement for the XT30R torch on the Airforce 27i.
  • Pro: the 770791 electrode number also fits other Hobart torches, per Hobart.
  • Limit: 770796 is XT30R-only, so it will not fit an XT40R.
  • Limit: third-party parts under these numbers may differ from OEM in material and wear life; read the listing text.

If you are unsure which parts your torch needs, start with plasma cutter consumables explained and what consumables a plasma cutter uses. For machine capacity, see what thickness a plasma cutter can cut, and for wear patterns see plasma cutter nozzle wear signs.

Check price on Amazon

Final Verdict

These are the right consumable numbers for an Airforce 27i with the XT30R torch. Check the torch model and the listing details first, then replace worn parts as a pair.

Frequently Asked Questions

Which Hobart plasma cutter uses the 770791 electrode and 770796 tip?

Hobart lists the 770796 tip for the XT30R torch used on the Airforce 27i. The 770791 electrode is listed for XT12R, XT30R and XT40R torches, so it appears across more than one machine.

Can I use the 770796 tip on an XT40R torch?

No. Hobart lists 770796 for the XT30R torch. The XT40R uses its own tip, so check the torch manual for the correct part number.

How do I know when the electrode and tip are worn out?

Look for a deep pit in the electrode insert, an enlarged tip orifice, a hard-to-start or wandering arc, and more dross or a ragged edge on the cut.

Are the Amazon parts OEM Hobart parts?

The listing wording decides that. Read the title and description for the brand and pack count. If you need genuine parts, buy from a Hobart dealer.

Alfred Chase
Alfred Chase

Alfred Chase is the main voice behind Garage Welding, with 15 years of experience in welding. Since 2025 he has written the site's welding guides and product reviews, covering MIG, flux-core, TIG and stick welding, filler metals, welding machines, torch parts, helmets, gloves and shop safety gear. He writes for people welding in a home garage or small shop, so he sticks to what helps: clear settings, safe habits, honest limits and fixes for the problems beginners run into. His product reviews are based on manufacturer specs and listing details, and he says plainly when something isn't confirmed.

Leave a Comment

Your email address will not be published. Required fields are marked *