How Much Does a Rig Welder Make an Hour?
When I first stepped onto an oil rig as a welder, I remember staring at the thick steel plates, TIG torch in hand, and wondering, “Just how much does a rig welder make an hour?” After years of wrestling with…
How to Weld Stainless Steel with a Stick Welder?
First time I tried to weld stainless steel with a stick welder — I was confident, but the reality hit fast. The arc kept running too hot, my bead looked messy, and the stainless warped more than I expected. That’s…
Oxygen Cylinder Storage Requirements I Follow for Safety
One of my early shop days took a sharp turn when I nearly tripped over a poorly stored oxygen cylinder while moving my MIG rig across the floor. At the time, my head was buried in figuring out arc control,…
How Does Gauge Thickness Work?
I burned through a thin sheet of stainless because I didn’t fully understand how gauge thickness worked. I had my MIG dialed in, filler wire ready, but the arc control was all over the place — and that one mistake…
When Would You Use Gas Tungsten Arc Welding?
I struggled to weld a thin piece of stainless steel using my MIG setup—no matter how carefully I adjusted the settings, the arc just kept burning through the metal. That’s when I realized why so many pros turn to Gas…
How to Become an Oil Rig Welder (2025): Skills & Pay
Working on an oil rig as a welder is no joke—thick steel plates, tricky stainless joints, and the constant need for clean, strong welds can test even experienced hands. I’ve seen plenty of welders get stuck deciding between MIG and…
What Are the 5 Parameters of Welding?
I burned through a thin stainless plate because I had my amperage set way too high—nothing teaches you faster than watching your carefully prepped joint turn into a mess. Like most welders, I quickly learned that getting a strong, clean…
What Can I Do with a Welding Certificate
When I first earned my welding certificate, I remember standing in the shop staring at a stack of plates, wondering, “Alright, now what can I actually do with this piece of paper?” I had put in the hours learning how…
What Are the Different Types of Flux for Soldering?
One of the biggest wake-up calls I had in the shop came when a soldered stainless joint failed because I’d grabbed the wrong flux. At first glance, the bead looked fine, but it turned brittle fast—and that’s when it hit…
What Is a Welding Transformer?
I tried to run a bead on a thick steel plate using an old stick welder in the shop — the arc kept sputtering, the rod stuck, and the weld looked nothing like the smooth joints I wanted. That’s when…